turbostat gives valid results across suspend to idle, aka freeze,
whether invoked in  interval mode, or in command mode.
Indeed, this can be used to measure suspend to idle:

turbostat echo freeze > /sys/power/state

But this does not work across suspend to ACPI S3, because the
processor counters, including the TSC, are reset on resume.
Further, when turbostat detects a problem, it does't forgive
the hardware, and interval mode will print *'s from there on out.

Instead, upon detecting counters going backwards, simply
reset and start over.

Interval mode across ACPI S3: (observe TSC going backwards)

root@sharkbay:/home/lenb/turbostat-src# ./turbostat -M 0x10
     CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz           MSR 0x010
       -       1    0.06     858    2294  0x0000000000000000
       0       0    0.06     847    2294  0x0000002a254b98ac
       1       1    0.06     878    2294  0x0000002a254efa3a
       2       1    0.07     843    2294  0x0000002a2551df65
       3       0    0.05     863    2294  0x0000002a2553fea2
turbostat: re-initialized with num_cpus 4
     CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz           MSR 0x010
       -       2    0.20     849    2294  0x0000000000000000
       0       2    0.26     856    2294  0x0000000449abb60d
       1       2    0.20     844    2294  0x0000000449b087ec
       2       2    0.21     850    2294  0x0000000449b35d5d
       3       1    0.12     839    2294  0x0000000449b5fd5a
^C

Command mode across ACPI S3:
root@sharkbay:/home/lenb/turbostat-src# ./turbostat -M 0x10 sleep 10
./turbostat: Counter reset detected
14.196299 sec
Signed-off-by: NLen Brown <len.brown@intel.com>

The RAPL Joules counter is limited in capacity.
Turbostat estimates how soon it can roll-over
based on the max TDP of the processor --
which tells us the maximum increment rate.

eg.
RAPL: 2759 sec. Joule Counter Range, at 95 Watts

So if a sample duration is longer than 2759 seconds on this system,
'**' replace the decimal place in the display to indicate
that the results may be suspect.

But the display had an extra ' ' in this case, throwing off the columns.

Also, the -J "Joules" option appended an extra "time" column
to the display.  While this may be useful, it printed the interval time,
which may not be the accurate time per processor.  Remove this column,
which appeared only when using '-J',
as we plan to add accurate per-cpu interval times in a future commit.
Signed-off-by: NLen Brown <len.brown@intel.com>

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb
  kasan: support use-after-scope detection
  kasan: update kasan_global for gcc 7
  lib/debugobjects: export for use in modules
  zram: fix unbalanced idr management at hot removal
  thp: fix corner case of munlock() of PTE-mapped THPs
  mm, thp: propagation of conditional compilation in khugepaged.c

Hugetlb pages have ->index in size of the huge pages (PMD_SIZE or
PUD_SIZE), not in PAGE_SIZE as other types of pages.  This means we
cannot user page_to_pgoff() to check whether we've got the right page
for the radix-tree index.

Let's introduce page_to_index() which would return radix-tree index for
given page.

We will be able to get rid of this once hugetlb will be switched to
multi-order entries.

Fixes: fc127da0 ("truncate: handle file thp")
Link: http://lkml.kernel.org/r/20161123093053.mjbnvn5zwxw5e6lk@black.fi.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDoug Nelson <doug.nelson@intel.com>
Tested-by: NDoug Nelson <doug.nelson@intel.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Gcc revision 241896 implements use-after-scope detection.  Will be
available in gcc 7.  Support it in KASAN.

Gcc emits 2 new callbacks to poison/unpoison large stack objects when
they go in/out of scope.  Implement the callbacks and add a test.

[dvyukov@google.com: v3]
  Link: http://lkml.kernel.org/r/1479998292-144502-1-git-send-email-dvyukov@google.com
Link: http://lkml.kernel.org/r/1479226045-145148-1-git-send-email-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kasan_global struct is part of compiler/runtime ABI.  gcc revision
241983 has added a new field to kasan_global struct.  Update kernel
definition of kasan_global struct to include the new field.

Without this patch KASAN is broken with gcc 7.

Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drivers, or other modules, that use a mixture of objects (especially
objects embedded within other objects) would like to take advantage of
the debugobjects facilities to help catch misuse.  Currently, the
debugobjects interface is only available to builtin drivers and requires
a set of EXPORT_SYMBOL_GPL for use by modules.

I am using the debugobjects in i915.ko to try and catch some invalid
operations on embedded objects.  The problem currently only presents
itself across module unload so forcing i915 to be builtin is not an
option.

Link: http://lkml.kernel.org/r/20161122143039.6433-1-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "Du, Changbin" <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The zram hot removal code calls idr_remove() even when zram_remove()
returns an error (typically -EBUSY).  This results in a leftover at the
device release, eventually leading to a crash when the module is
reloaded.

As described in the bug report below, the following procedure would
cause an Oops with zram:

 - provision three zram devices via modprobe zram num_devices=3
 - configure a size for each device
   + echo "1G" > /sys/block/$zram_name/disksize
 - mkfs and mount zram0 only
 - attempt to hot remove all three devices
   + echo 2 > /sys/class/zram-control/hot_remove
   + echo 1 > /sys/class/zram-control/hot_remove
   + echo 0 > /sys/class/zram-control/hot_remove
     - zram0 removal fails with EBUSY, as expected
 - unmount zram0
 - try zram0 hot remove again
   + echo 0 > /sys/class/zram-control/hot_remove
     - fails with ENODEV (unexpected)
 - unload zram kernel module
   + completes successfully
 - zram0 device node still exists
 - attempt to mount /dev/zram0
   + mount command is killed
   + following BUG is encountered

 BUG: unable to handle kernel paging request at ffffffffa0002ba0
 IP: get_disk+0x16/0x50
 Oops: 0000 [#1] SMP
 CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176
 Call Trace:
   exact_lock+0xc/0x20
   kobj_lookup+0xdc/0x160
   get_gendisk+0x2f/0x110
   __blkdev_get+0x10c/0x3c0
   blkdev_get+0x19d/0x2e0
   blkdev_open+0x56/0x70
   do_dentry_open.isra.19+0x1ff/0x310
   vfs_open+0x43/0x60
   path_openat+0x2c9/0xf30
   do_filp_open+0x79/0xd0
   do_sys_open+0x114/0x1e0
   SyS_open+0x19/0x20
   entry_SYSCALL_64_fastpath+0x13/0x94

This patch adds the proper error check in hot_remove_store() not to call
idr_remove() unconditionally.

Fixes: 17ec4cd9 ("zram: don't call idr_remove() from zram_remove()")
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970
Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NDavid Disseldorp <ddiss@suse.de>
Reported-by: NDavid Disseldorp <ddiss@suse.de>
Tested-by: NDavid Disseldorp <ddiss@suse.de>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>    [4.4+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following program triggers BUG() in munlock_vma_pages_range():

	// autogenerated by syzkaller (http://github.com/google/syzkaller)
	#include <sys/mman.h>

	int main()
	{
	  mmap((void*)0x20105000ul, 0xc00000ul, 0x2ul, 0x2172ul, -1, 0);
	  mremap((void*)0x201fd000ul, 0x4000ul, 0xc00000ul, 0x3ul, 0x203f0000ul);
	  return 0;
	}

The test-case constructs the situation when munlock_vma_pages_range()
finds PTE-mapped THP-head in the middle of page table and, by mistake,
skips HPAGE_PMD_NR pages after that.

As result, on the next iteration it hits the middle of PMD-mapped THP
and gets upset seeing mlocked tail page.

The solution is only skip HPAGE_PMD_NR pages if the THP was mlocked
during munlock_vma_page().  It would guarantee that the page is
PMD-mapped as we never mlock PTE-mapeed THPs.

Fixes: e90309c9 ("thp: allow mlocked THP again")
Link: http://lkml.kernel.org/r/20161115132703.7s7rrgmwttegcdh4@black.fi.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b46e756f ("thp: extract khugepaged from mm/huge_memory.c")
moved code from huge_memory.c to khugepaged.c.  Some of this code should
be compiled only when CONFIG_SYSFS is enabled but the condition around
this code was not moved into khugepaged.c.

The result is a compilation error when CONFIG_SYSFS is disabled:

  mm/built-in.o: In function `khugepaged_defrag_store': khugepaged.c:(.text+0x2d095): undefined reference to `single_hugepage_flag_store'
  mm/built-in.o: In function `khugepaged_defrag_show': khugepaged.c:(.text+0x2d0ab): undefined reference to `single_hugepage_flag_show'

This commit adds the #ifdef CONFIG_SYSFS around the code related to
sysfs.

Link: http://lkml.kernel.org/r/20161114203448.24197-1-jeremy.lefaure@lse.epita.frSigned-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull clk fixes from Stephen Boyd:
 "Two small fixes for MIPI PLLs on sunxi devices and a build fix for a
  Broadcom clk driver having unmet dependencies"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX
  clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock
  clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it

Pull pwm fixes from Thierry Reding:
 "This contains two one-line fixes for issues that were introduced in
  v4.9-rc1"

* tag 'pwm/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fix device reference leak
  pwm: meson: Add missing spin_lock_init()

The ER records are printed without explicit log level presuming line
continuation until "\n".  After the commit 4bcc595c (printk:
reinstate KERN_CONT for printing continuation lines), the ER records are
printed a character per line.

Adding KERN_CONT to appropriate printk statements restores the printout
behavior.
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARC fixes from Vineet Gupta:

 - fix PAE40 crash [Yuriy]

 - disable IO-Coherency by default

 - use a different inline asm constraint for Zero Overhead loops

* tag 'arc-4.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: PAE40: Fix crash at munmap
  ARC: mm: IOC: Don't enable IOC by default
  ARC: Don't use "+l" inline asm constraint

This enables CONFIG_MODVERSIONS again, but allows for missing symbol CRC
information in order to work around the issue that newer binutils
versions seem to occasionally drop the CRC on the floor.  binutils 2.26
seems to work fine, while binutils 2.27 seems to break MODVERSIONS of
symbols that have been defined in assembler files.

[ We've had random missing CRC's before - it may be an old problem that
  just is now reliably triggered with the weak asm symbols and a new
  version of binutils ]

Some day I really do want to remove MODVERSIONS entirely.  Sadly, today
does not appear to be that day: Debian people apparently do want the
option to enable MODVERSIONS to make it easier to have external modules
across kernel versions, and this seems to be a fairly minimal fix for
the annoying problem.

Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: NMichal Marek <mmarek@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull CIFS fixes from Steve French:
 "A few misc important cifs fixes, including a fix for a 4.9 regression
  in posix_acl xattr handling"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: iterate over posix acl xattr entry correctly in ACL_to_cifs_posix()
  Call echo service immediately after socket reconnect
  CIFS: Fix BUG() in calc_seckey()

Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  The be2iscsi is a potential device overrun in consistent memory, which
  could have nasty consequences if the consistent allocations are
  packed.

  The hpsa one fixes a regression where older controllers can now get a
  numbering clash between the first internal disk and the controller.

  The libfc one is a regression in timespec conversions which causes a
  user visible issue in a command line tool and the mpt3sas one fixes a
  regression where the controller could remain permanently blocked after
  an ATA pass through command followed by a reset"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: be2iscsi: allocate enough memory in beiscsi_boot_get_sinfo()
  scsi: mpt3sas: Unblock device after controller reset
  scsi: hpsa: use bus '3' for legacy HBA devices
  scsi: libfc: fix seconds_since_last_reset miscalculation

commit 1c3c9093 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr
from pfn, but the page shift was getting truncated to 32 bits since we lost
the proper cast to 64 bits (for PAE400

Instead of reverting that commit, use a better helper which is 32/64 bits
safe just like ARM implementation.

Fixes: 1c3c9093 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS")
Cc: <stable@vger.kernel.org>   #4.4+
Signed-off-by: NYuriy Kolerov <yuriy.kolerov@synopsys.com>
[vgupta: massaged changelog]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Linus found there still is a race in mremap after commit 5d190420
("mremap: fix race between mremap() and page cleanning").

As described by Linus:
 "the issue is that another thread might make the pte be dirty (in the
  hardware walker, so no locking of ours will make any difference)
  *after* we checked whether it was dirty, but *before* we removed it
  from the page tables"

Fix it by moving the check after we removed it from the page table.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure to drop the reference to the parent device taken by
class_find_device() after "unexporting" any children when deregistering
a PWM chip.

Fixes: 0733424c ("pwm: Unexport children before chip removal")
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

Commit 2211d5ba ("posix_acl: xattr representation cleanups")
removes the typedefs and the zero-length a_entries array in struct
posix_acl_xattr_header, and uses bare struct posix_acl_xattr_header
and struct posix_acl_xattr_entry directly.

But it failed to iterate over posix acl slots when converting posix
acls to CIFS format, which results in several test failures in
xfstests (generic/053 generic/105) when testing against a samba v1
server, starting from v4.9-rc1 kernel. e.g.

  [root@localhost xfstests]# diff -u tests/generic/105.out /root/xfstests/results//generic/105.out.bad
  --- tests/generic/105.out       2016-09-19 16:33:28.577962575 +0800
  +++ /root/xfstests/results//generic/105.out.bad 2016-10-22 15:41:15.201931110 +0800
  @@ -1,3 +1,4 @@
   QA output created by 105
   -rw-r--r-- root
  +setfacl: subdir: Invalid argument
   -rw-r--r-- root

Fix it by introducing a new "ace" var, like what
cifs_copy_posix_acl() does, and iterating posix acl xattr entries
over it in the for loop.
Signed-off-by: NEryu Guan <guaneryu@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") changes the behaviour of the SMB2 echo
service and causes it to renegotiate after a socket reconnect. However
under default settings, the echo service could take up to 120 seconds to
be scheduled.

The patch forces the echo service to be called immediately resulting a
negotiate call being made immediately on reconnect.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Andy Lutromirski's new virtually mapped kernel stack allocations moves
kernel stacks the vmalloc area. This triggers the bug
 kernel BUG at ./include/linux/scatterlist.h:140!
at calc_seckey()->sg_init()
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Pull libata fixes from Tejun Heo:
 "The recent changes in ahci MSI handling need one more fix.  Hopefully,
  this restores parity with before.

  The other two are minor fixes with both low impact and risk"

* 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: always fall back to single-MSI mode
  libata-scsi: Fixup ata_gen_passthru_sense()
  mvsas: fix error return code in mvs_task_prep()

Pull sparc fixes from David Miller:
 "Two ugly build warning fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  dbri: Fix compiler warning
  qlogicpti: Fix compiler warnings

dbri uses 'u32' for dma handle while invoking kernel DMA APIs,
instead of using dma_addr_t. This hasn't caused any 'incompatible
pointer type' warning on SPARC because until now dma_addr_t is of
type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit
DMA and therefore dma_addr_t became of type u64. This makes
'incompatible pointer type' warnings inevitable.

e.g.
sound/sparc/dbri.c: In function ‘snd_dbri_create’:
sound/sparc/dbri.c:2538: warning: passing argument 3 of ‘dma_zalloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:608: note: expected ‘dma_addr_t *’ but argument is of type ‘u32 *’

For the record, dbri(sbus) driver never executes on sun4v. Therefore
even though 64bit DMA is enabled on SPARC, dbri continues to use
legacy iommu that guarantees DMA address is always in 32bit range.

This patch resolves above compiler warning.
Signed-off-by: NTushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: Nthomas tai <thomas.tai@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qlogicpti uses '__u32' for dma handle while invoking kernel DMA APIs,
instead of using dma_addr_t. This hasn't caused any 'incompatible
pointer type' warning on SPARC because until now dma_addr_t is of
type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit
DMA and therefore dma_addr_t became of type u64. This makes
'incompatible pointer type' warnings inevitable.

e.g.
drivers/scsi/qlogicpti.c: In function ‘qpti_map_queues’:
drivers/scsi/qlogicpti.c:813: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’
drivers/scsi/qlogicpti.c:822: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’

For the record, qlogicpti never executes on sun4v. Therefore even
though 64bit DMA is enabled on SPARC, qlogicpti continues to use
legacy iommu that guarantees DMA address is always in 32bit range.

This patch resolves aforementioned compiler warnings.
Signed-off-by: NTushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: Nthomas tai <thomas.tai@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Apparenty this is coming in the way of gcc fix which inhibits the usage
of LP_COUNT as a gpr.

Cc: stable@vger.kernel.org
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Pull IOMMU fixes from David Woodhouse:
 "Two minor fixes.

  The first fixes the assignment of SR-IOV virtual functions to the
  correct IOMMU unit, and the second fixes the excessively large (and
  physically contiguous) PASID tables used with SVM"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Fix PASID table allocation
  iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.9:

   - Fix unreadable output in __do_page_fault due to the KERN_CONT
     patchset

   - Correctly handle MIPS R6 fixes to the c0_wired register"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: mm: Fix output of __do_page_fault
  MIPS: Mask out limit field when calculating wired entry count

Pull vfs splice fix from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix default_file_splice_read()

Botched calculation of number of pages.  As the result,
we were dropping pieces when doing splice to pipe from
e.g. 9p.
Reported-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull i2c fixes from Wolfram Sang:
 "Here is a revert and two bugfixes for the I2C designware driver.

  Please note that we are still hunting down a regression for the
  i2c-octeon driver. While there is a fix pending, we have unclear
  feedback from the testers currently. An rc8 would be quite helpful
  for this case"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: designware: do not disable adapter after transfer"
  i2c: designware: fix rx fifo depth tracking
  i2c: designware: report short transfers

Pull ARM fix from Russell King:
 "This resolves the ksyms issues by reverting the commit which
  introduced the breakage"

There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  Revert "arm: move exports to definitions"

Pull networking fixes from David Miller:

 1) Fix leak in fsl/fman driver, from Dan Carpenter.

 2) Call flow dissector initcall earlier than any networking driver can
    register and start to use it, from Eric Dumazet.

 3) Some dup header fixes from Geliang Tang.

 4) TIPC link monitoring compat fix from Jon Paul Maloy.

 5) Link changes require EEE re-negotiation in bcm_sf2 driver, from
    Florian Fainelli.

 6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman
    Mashak.

 7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  tipc: resolve connection flow control compatibility problem
  mvpp2: use correct size for memset
  net/mlx5: drop duplicate header delay.h
  net: ieee802154: drop duplicate header delay.h
  ibmvnic: drop duplicate header seq_file.h
  fsl/fman: fix a leak in tgec_free()
  net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
  tipc: improve sanity check for received domain records
  tipc: fix compatibility bug in link monitoring
  net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
  dwc_eth_qos: drop duplicate headers
  net sched filters: fix filter handle ID in tfilter_notify_chain()
  net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
  bnxt: do not busy-poll when link is down
  udplite: call proper backlog handlers
  ipv6: bump genid when the IFA_F_TENTATIVE flag is clear
  net/mlx4_en: Free netdev resources under state lock
  net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"
  rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit()
  bnxt_en: Fix a VXLAN vs GENEVE issue
  ...

Pull libnvdimm fixes from Dan Williams:

 - Fix a crash that occurs at driver initialization if the memory region
   is already busy (request_mem_region() fails).

 - Fix a vma validation check that mistakenly allows a private device-
   dax mapping to be established. Device-dax explicitly forbids private
   mappings so it can guarantee a given fault granularity and backing
   memory type.

 Both of these fixes have soaked in -next and are tagged for -stable.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fail all private mapping attempts
  device-dax: check devm_nsio_enable() return value

Pull KVM fixes from Radim Krčmář:
 "Four fixes for bugs found by syzkaller on x86, all for stable"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: check for pic and ioapic presence before use
  KVM: x86: fix out-of-bounds accesses of rtc_eoi map
  KVM: x86: drop error recovery in em_jmp_far and em_ret_far
  KVM: x86: fix out-of-bounds access in lapic

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - Set missing wakeup bit in LPCR on POWER9
   - Fix the early OPAL console wrappers
   - Fixup kernel read only mapping

  Fixes for code merged this cycle:
   - Fix missing CRCs, add more asm-prototypes.h declarations"

* tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fixup kernel read only mapping
  powerpc/boot: Fix the early OPAL console wrappers
  powerpc: Fix missing CRCs, add more asm-prototypes.h declarations
  powerpc: Set missing wakeup bit in LPCR on POWER9