- 22 3月, 2006 15 次提交
-
-
由 Charl Coetzee 提交于
Modules: AC97 Codec Added a codec patch for LM4550. It sets up a static volume resolution table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: AC97 Codec Added the support of static resolution table support for codecs that the driver cannot probe the volume resolution properly. The table pointer should be set in each codec patch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: BT87x driver - added 0x107d:0x6606 to whitelist - print also the pci device ID for developers when model is not known Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Alan Horstmann 提交于
Modules: ICE1712 driver Change the value written to hardware configuration register of envy24 chip in the case of Terratec DMX6fire to restrict the active ADCs & DACs to 6. Also add the dxr_enable module option to eventually leave the old behaviour when user requests. Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jaroslav Kysela 提交于
Modules: I2C cs8427,ICE1712 driver See ALSA bug#1785 for more details. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jaroslav Kysela 提交于
Modules: YMFPCI driver Added rear_swap module option / kernel parameter to configure the rear channel swapping. Default value is enable to make the AC3 passthrough working, but analog only users might revert the previous behaviour. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: au88x0 driver Fixed the structures for equalizer. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: au88x0 driver Fix the driver codes to run on 64bit architectures. The patch taken from ALSA BTS bug#1047. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ICE1712 driver Added the support of Prodigy-7.1LT board. The patch taken from ALSA BTS bug#1090. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: YMFPCI driver The routing of the effect 2/3 channels to the digital output is the opposite of the rear analog output (left/right swapped). We make the order correct for the digital output (which will make the analog rear have the channels swapped) to make AC3 output work. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,HDA Intel driver Added single_cmd module option for debugging in the case CORB/RIRB doesn't work well (e.g. due to wrong irq routings). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Intel8x0 driver Fix the detection of tertriary codec on SIS7012, including clean-ups of relevant codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ENS1370/1+ driver Fix resume of ens1370 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Digigram PCXHR driver Suppress debug messages. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2006 11 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fixed typos in alc882 model table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Arnaud Patard 提交于
Modules: HDA Codec driver This little patch add the model for the motherboard K8N51 from Gigabyte to the known models of ALC boards. Signed-off-by: NArnaud Patard <apatard@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver * Fix init sequence so manually retaskable jacks don't get added to the line_out list. * Update intel mobo config defaults to specify surround outputs as line outs rather than speakers. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,Intel8x0 driver Added MCP51 PCI ID to intel8x0 driver. Also, updated the supported chips in documentation. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver Fixed the wrong widget id for line-2 selector in the init verb of ALC260. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fix max_channels computation for STAC92xx codecs in the case only HP pin without line-out pins is detected in the default pin config. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: VIA82xx driver Added the dxs entry for P4M800/VIA8237R, reported by OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver Adds support for the SigmaTel STAC927x HDA codec family. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver Add SigmaTel HDA support for the Intel D975XBK motherboard. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
Modules: HDA Codec driver This adds support for Agere's variant of Si3054/5 based HDA modem. Signed-off-by: NSasha Khapyorsky <sashak@alsa-project.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: VIA82xx driver Add dxs entry for a FSC board. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 1月, 2006 14 次提交
-
-
由 Andrew Morton 提交于
Modules: Digigram PCXHR driver sound/pci/pcxhr/pcxhr.c: In function 'pcxhr_update_r_buffer': sound/pci/pcxhr/pcxhr.c:460: warning: unsigned int format, different type arg (arg 7) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andrew Morton 提交于
Modules: RME9652 driver sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_preallocate_memory': sound/pci/rme9652/hdspm.c:3327: warning: int format, different type arg (arg 4) sound/pci/rme9652/hdspm.c:3331: warning: int format, different type arg (arg 4) sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_create': sound/pci/rme9652/hdspm.c:3513: warning: int format, different type arg (arg 4) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andrew Morton 提交于
Modules: CS46xx driver Reported by <dcb314@hotmail.com> in http://bugzilla.kernel.org/show_bug.cgi?id=5903Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: au88x0 driver Fixed an uninitialized variable. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: VIA82xx driver Added the dxs_support entry for EpoX 9HEAI. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Added the missing 'Capture Switch' control for Sigmatel STAC92xx codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Ball 提交于
Modules: Intel8x0 driver This patch adds a quirk entry for the Dell Optiplex GX270, on which the volume is set by the headphone control, not the master control. Signed-off-by: NChris Ball <cjb@mrao.cam.ac.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jon Mason 提交于
Modules: ALI5451 driver This patch uses #defines for the Vendor ID and Device ID and uses the new PCI_DEVICE macro. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jon Mason 提交于
Modules: Trident driver Some pcnet32 hardware erroneously has the Vendor ID for Trident. The pcnet32 driver looks for the PCI ethernet class before grabbing the hardware, but the current trident driver does not check against the PCI audio class. This allows the trident driver to claim the pcnet32 hardware. This patch prevents that. Per Jiri Slaby's request, I changed the trident driver to use PCI_DEVICE macro and PCI ID #defines. This patch is untested on Trident 4DWAVE_DX hardware, but has been tested on pcnet32 hardware. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: YMFPCI driver Set the (read only) sample rate field in the IEC958 mixer controls to 48 kHz (instead of 44.1 kHz) because that is the rate actually supported by the hardware. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Modules: AC97 Codec Fix CLFE channel setting of ALC850 (ALSA bug#1731). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rene Rebe 提交于
Modules: CS5535 driver Added AMD CS5536 to the cs5535audio driver. Signed-off-by: NRene Rebe <rene@exactcode.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: BT87x driver Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Modules: AC97 Codec Added a blacklist to suppress to create jack sense controls. These controls must be always off on some devices (e.g. Thinkpad). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-