Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 07 11月, 2015 7 次提交
    • W
      perf test: Add 'perf test BPF' · ba1fae43
      由 Wang Nan 提交于 
      This patch adds BPF testcase for testing BPF event filtering.

By utilizing the result of 'perf test LLVM', this patch compiles the
eBPF sample program then test its ability. The BPF script in 'perf test
LLVM' lets only 50% samples generated by epoll_pwait() to be captured.
This patch runs that system call for 111 times, so the result should
contain 56 samples.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-8-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ba1fae43
    • W
      perf test: Enhance the LLVM tests: add kbuild test · 7af3f3d5
      由 Wang Nan 提交于 
      This patch adds a kbuild testcase to check whether kernel headers can be
correctly found.

For example:
  # mv /lib/modules/4.3.0-rc5{,.bak}
  # perf test LLVM

    38: Test LLVM searching and compiling                        : Skip

  # perf test -v LLVM
  ...
  <stdin>:11:10: fatal error: 'uapi/linux/fs.h' file not found
  #include <uapi/linux/fs.h>
          ^
  1 error generated.
  ERROR:	unable to compile -
  Hint:	Check error message shown above.
  Hint:	You can also pre-compile it into .o using:
     		 clang -target bpf -O2 -c -
	 with proper -I and -D options.
  Failed to compile test case: 'Test kbuild searching'
  test child finished with -2
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-7-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7af3f3d5
    • W
      perf test: Enhance the LLVM test: update basic BPF test program · b31de018
      由 Wang Nan 提交于 
      This patch replaces the original toy BPF program with the previously
introduced bpf-script-example.c. Dynamically embeddeding it into
'llvm-src-base.c'.

The newly introduced BPF program attaches a BPF program to
'sys_epoll_pwait()'. perf itself never use that syscall, so further test
can verify their result with it. The program would generate 1 sample in
every 2 calls of epoll_pwait() system call.

Since the resulting BPF object is useful per se for further tests,
test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from
source. The LLVM test was rewritten to use it.

Committer note:

Running it:

  [root@zoo wb]# perf test -v LLVM
  35: Test LLVM searching and compiling                        :
  --- start ---
  test child forked, pid 17740
  Kernel build dir is set to /lib/modules/4.3.0-rc1+/build
  set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build
  unset env: KBUILD_OPTS
  include option is set to  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated  -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
  set env: NR_CPUS=4
  set env: LINUX_VERSION_CODE=0x40300
  set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang
  set env: CLANG_OPTIONS=-xc
  set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated  -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
  set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build
  set env: CLANG_SOURCE=-
  llvm compiling command template: echo '/*
   * bpf-script-example.c
   * Test basic LLVM building
   */
  #ifndef LINUX_VERSION_CODE
  # error Need LINUX_VERSION_CODE
  # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
  #endif
  #define BPF_ANY 0
  #define BPF_MAP_TYPE_ARRAY 2
  #define BPF_FUNC_map_lookup_elem 1
  #define BPF_FUNC_map_update_elem 2

  static void *(*bpf_map_lookup_elem)(void *map, void *key) =
	  (void *) BPF_FUNC_map_lookup_elem;
  static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) =
	  (void *) BPF_FUNC_map_update_elem;

  struct bpf_map_def {
	  unsigned int type;
	  unsigned int key_size;
	  unsigned int value_size;
	  unsigned int max_entries;
  };

  #define SEC(NAME) __attribute__((section(NAME), used))
  struct bpf_map_def SEC("maps") flip_table = {
	  .type = BPF_MAP_TYPE_ARRAY,
	  .key_size = sizeof(int),
	  .value_size = sizeof(int),
	  .max_entries = 1,
  };

  SEC("func=sys_epoll_pwait")
  int bpf_func__sys_epoll_pwait(void *ctx)
  {
	  int ind =0;
	  int *flag = bpf_map_lookup_elem(&flip_table, &ind);
	  int new_flag;
	  if (!flag)
		  return 0;
	  /* flip flag and store back */
	  new_flag = !*flag;
	  bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY);
	  return new_flag;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
  test child finished with 0
  ---- end ----
  Test LLVM searching and compiling: Ok
  [root@zoo wb]#
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b31de018
    • W
      perf bpf: Improve BPF related error messages · d3e0ce39
      由 Wang Nan 提交于 
      A series of bpf loader related error codes were introduced to help error
reporting. Functions were improved to return these new error codes.

Functions which return pointers were adjusted to encode error codes into
return value using the ERR_PTR() interface.

bpf_loader_strerror() was improved to convert these error messages to
strings. It checks the error codes and calls libbpf_strerror() and
strerror_r() accordingly, so caller don't need to consider checking the
range of the error code.

In bpf__strerror_load(), print kernel version of running kernel and the
object's 'version' section to notify user how to fix his/her program.

v1 -> v2:
 Use macro for error code.

 Fetch error message based on array index, eliminate for-loop.

 Print version strings.

Before:

  # perf record -e ./test_kversion_nomatch_program.o sleep 1
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  After:

  # perf record -e ./test_kversion_nomatch_program.o ls
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ 'version' (4.4.0) doesn't match running kernel (4.3.0)
  SKIP
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com
[ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d3e0ce39
    • W
      perf tools: Make fetch_kernel_version() publicly available · 07bc5c69
      由 Wang Nan 提交于 
      There are 2 places in llvm-utils.c which find kernel version information
through uname. This patch extracts the uname related code into a
fetch_kernel_version() function and puts it into util.h so it can be
reused.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818135-87310-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      07bc5c69
    • W
      bpf tools: Add new API bpf_object__get_kversion() · 45825d8a
      由 Wang Nan 提交于 
      bpf_object__get_kversion() can be used to fetch value of object's
'version' section. Following patch will use it for error reporting.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      45825d8a
    • W
      bpf tools: Improve libbpf error reporting · 6371ca3b
      由 Wang Nan 提交于 
      In this patch, a series of libbpf specific error numbers and
libbpf_strerror() are introduced to help reporting errors.

Functions are updated to pass correct the error number through the
CHECK_ERR() macro.

All users of bpf_object__open{_buffer}() and bpf_program__title() in
perf are modified accordingly. In addition, due to the error codes
changing, bpf__strerror_load() is also modified to use them.

bpf__strerror_head() is also changed accordingly so it can parse libbpf
errors. bpf_loader_strerror() is introduced for that purpose, and will
be improved by the following patch.

load_program() is improved not to dump log buffer if it is empty. log
buffer is also used to deduce whether the error was caused by an invalid
program or other problem.

v1 -> v2:

 - Using macro for error code.

 - Fetch error message based on array index, eliminate for-loop.

 - Use log buffer to detect the reason of failure. 3 new error code
   are introduced to replace LIBBPF_ERRNO__LOAD.

In v1:

  # perf record -e ./test_ill_program.o ls
  event syntax error: './test_ill_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  # perf record -e ./test_kversion_nomatch_program.o ls
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  # perf record -e ./test_big_program.o ls
  event syntax error: './test_big_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  In v2:

  # perf record -e ./test_ill_program.o ls
  event syntax error: './test_ill_program.o'
                       \___ Kernel verifier blocks program loading
  SKIP

  # perf record -e ./test_kversion_nomatch_program.o
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ Incorrect kernel version
  SKIP
  (Will be further improved by following patches)

  # perf record -e ./test_big_program.o
  event syntax error: './test_big_program.o'
                       \___ Program too big
  SKIP
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6371ca3b
  3. 06 11月, 2015 3 次提交
  5. 05 11月, 2015 10 次提交
  7. 03 11月, 2015 3 次提交
  9. 30 10月, 2015 7 次提交
    • R
      perf unwind: Pass symbol source to libunwind · 7ed4915a
      由 Rabin Vincent 提交于 
      Even if --symfs is used to point to the debug binaries, we send in the
non-debug filenames to libunwind, which leads to libunwind not finding
the debug frame.  Fix this by preferring the file in --symfs, if it is
available.
Signed-off-by: NRabin Vincent <rabin.vincent@axis.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-1-git-send-email-rabin.vincent@axis.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7ed4915a
    • R
      tools build: Fix libiberty feature detection · 3af6ed84
      由 Rabin Vincent 提交于 
      Any CFLAGS or LDFLAGS set by the user need to be passed to the feature
build command.  This many include for example -I or -L to point to
libraries and include files in custom paths.

In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD
macro which always sends in CFLAGS and LDFLAGS.  The libiberty build line
however doesn't use the BUILD macro and thus needs to send in CFLAGS and
LDFLAGS explicitly.  Without this, when using custom CFLAGS/LDFLAGS, libiberty
fails to be detected and the perf link fails with something like:

   LINK     perf
  libbfd.a(bfd.o): In function `bfd_errmsg':
  bfd.c:(.text+0x168): undefined reference to `xstrerror'
  bbfd.a(opncls.o): In function `_bfd_new_bfd':
  opncls.c:(.text+0xe8): undefined reference to `objalloc_create'
  ...
Signed-off-by: NRabin Vincent <rabin.vincent@axis.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3af6ed84
    • W
      perf tools: Compile scriptlets to BPF objects when passing '.c' to --event · d509db04
      由 Wang Nan 提交于 
      This patch provides infrastructure for passing source files to --event
directly using:

 # perf record --event bpf-file.c command

This patch does following works:

 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
    expanded to allow caller tell it whether the passed file is source
    file or object.

 2) llvm__compile_bpf() is called to compile the '.c' file, the result
    is saved into memory. Use bpf_object__open_buffer() to load the
    in-memory object.

Introduces a bpf-script-example.c so we can manually test it:

 # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1

Note that '--clang-opt' must put before '--event'.

Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d509db04
    • W
      perf record: Add clang options for compiling BPF scripts · 71dc2326
      由 Wang Nan 提交于 
      Although previous patch allows setting BPF compiler related options in
perfconfig, on some ad-hoc situation it still requires passing options
through cmdline. This patch introduces 2 options to 'perf record' for
this propose: --clang-path and --clang-opt.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-9-git-send-email-wangnan0@huawei.com
[ Add the new options to the 'record' man page ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      71dc2326
    • W
      perf bpf: Attach eBPF filter to perf event · 1f45b1d4
      由 Wang Nan 提交于 
      This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:

 # perf record --event ./hello_world.o ls

A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.

PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.

It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.

Committer note:

The bpf proggie used so far:

  __attribute__((section("fork=_do_fork"), used))
  int fork(void *ctx)
  {
	  return 0;
  }

  char _license[] __attribute__((section("license"), used)) = "GPL";
  int _version __attribute__((section("version"), used)) = 0x40300;

failed to produce any samples, even with forks happening and it being
running in system wide mode.

That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/

Change it to 'return 1;' instead and after that:

  # trace --no-syscalls --event /tmp/foo.o
     0.000 perf_bpf_probe:fork:(ffffffff8109be30))
     2.333 perf_bpf_probe:fork:(ffffffff8109be30))
     3.725 perf_bpf_probe:fork:(ffffffff8109be30))
     4.550 perf_bpf_probe:fork:(ffffffff8109be30))
  ^C#

And it works with all tools, including 'perf trace'.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1f45b1d4
    • J
      perf tools: Make sure fixdep is built before libbpf · 50f1e6d0
      由 Jiri Olsa 提交于 
      While doing 'make -C tools/perf build-test':

   LD       fixdep-in.o
   LINK     fixdep
 /bin/sh: /home/acme/git/linux/tools/build/fixdep: Permission denied
 make[6]: *** [bpf.o] Error 1
 make[5]: *** [libbpf-in.o] Error 2
 make[4]: *** [/home/acme/git/linux/tools/lib/bpf/libbpf.a] Error 2
 make[4]: *** Waiting for unfinished jobs....

The fixdep tool needs to be built as the first binary.  Libraries are
built in paralel, so each of them needs to depend on fixdep target.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151028204450.GA25553@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      50f1e6d0
    • S
      perf script: Enable printing of branch stack · dc323ce8
      由 Stephane Eranian 提交于 
      This patch improves perf script by enabling printing of the
branch stack via the 'brstack' and 'brstacksym' arguments to
the field selection option -F. The option is off by default
and operates only if the perf.data file has branch stack content.

The branches are printed in to/from pairs. The most recent branch
is printed first. The number of branch entries vary based on the
underlying hardware and filtering used.

The brstack prints FROM/TO addresses in raw hexadecimal format.
The brstacksym prints FROM/TO addresses in symbolic form wherever
possible.

 $ perf script -F ip,brstack
  5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ...

 $ perf script -F ip,brstacksym
  4011e0 noploop+0x0/noploop+0x0/P/-/-/0

The notation F/T/M/X/A/C describes the attributes of the branch.
F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL)
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yuanfang Chen <cyfmxc@gmail.com>
Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dc323ce8
  11. 29 10月, 2015 3 次提交
    • A
      perf trace: Add cmd string table to decode sys_bpf first arg · 729a7841
      由 Arnaldo Carvalho de Melo 提交于 
       # perf trace -e bpf perf record -e /tmp/foo.o -a
   362.779 (0.130 ms): perf/3451 bpf(cmd: PROG_LOAD, uattr: 0x7ffe9a6825d0, size: 48) = 3

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2b0nknu53baz9e0wj4thcdd8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      729a7841
    • W
      perf bpf: Collect perf_evsel in BPF object files · 4edf30e3
      由 Wang Nan 提交于 
      This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:

 # perf record --event filter.o ls

Can trace on each of the probes defined in filter.o.

The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().

Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.

Committer notes:

Before:

  # /tmp/oldperf record --event /tmp/foo.o -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.198 MB perf.data ]
  # perf evlist
  /tmp/foo.o
  # perf evlist -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
  sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
  exclude_guest: 1, mmap2: 1, comm_exec: 1

I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:

  # perf record --event /tmp/foo.o -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.210 MB perf.data ]
  # perf evlist -v
  perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
  sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
  1, mmap2: 1, comm_exec: 1
  #

We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.

To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:

  # perf record --event /tmp/foo.o -a

So, with that in place, we can use 'perf probe' to see what is in place:

  # perf probe -l
    perf_bpf_probe:fork  (on _do_fork@acme/git/linux/kernel/fork.c)

We also can use debugfs:

  [root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
  p:perf_bpf_probe/fork _text+638512

Ok, now lets stop and see if we got some forks:

  [root@felicio linux]# perf record --event /tmp/foo.o -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]

  [root@felicio linux]# perf script
      sshd  1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
      sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
      sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
      sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
  <SNIP>

Sure enough, we have 111 forks :-)

Callchains seems to work as well:

  # perf report --stdio --no-child
  # To display the perf.data header info, please use --header/--header-only options.
  #
  # Total Lost Samples: 0
  #
  # Samples: 562  of event 'perf_bpf_probe:fork'
  # Event count (approx.): 562
  #
  # Overhead  Command   Shared Object     Symbol
  # ........  ........  ................  ............
  #
      44.66%  sh        [kernel.vmlinux]  [k] _do_fork
                    |
                    ---_do_fork
                       entry_SYSCALL_64_fastpath
                       __libc_fork
                       make_child

    26.16%  make      [kernel.vmlinux]  [k] _do_fork
<SNIP>
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4edf30e3
    • W
      perf tools: Load eBPF object into kernel · 1e5e3ee8
      由 Wang Nan 提交于 
      This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.

Committer notes:

Testing it:

When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:

  int _version __attribute__((section("version"), used)) = 0x40100;

For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:

  # perf record --event /tmp/foo.o sleep 1
  libbpf: load bpf program failed: Invalid argument
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:

  libbpf: -- END LOG --
  libbpf: failed to load program 'fork=_do_fork'
  libbpf: failed to load object '/tmp/foo.o'
  event syntax error: '/tmp/foo.o'
                       \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:

  # perf record --event /tmp/foo.o -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.202 MB perf.data ]
  # perf evlist -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
  sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
  exclude_guest: 1, mmap2: 1, comm_exec: 1
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1e5e3ee8
  13. 28 10月, 2015 7 次提交
    • W
      perf tools: Create probe points for BPF programs · aa3abf30
      由 Wang Nan 提交于 
      This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.

By utilizing the new probing API, this patch creates probe points during
event parsing.

To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.

strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.

Committer note:

Trying it:

To build a test eBPF object file:

I am testing using a script I built from the 'perf test -v LLVM' output:

  $ cat ~/bin/hello-ebpf
  export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
  export WORKING_DIR=/lib/modules/4.2.0/build
  export CLANG_SOURCE=-
  export CLANG_OPTIONS=-xc

  OBJ=/tmp/foo.o
  rm -f $OBJ
  echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
  clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ

 ---

First asking to put a probe in a function not present in the kernel
(misses the initial _):

  $ perf record --event /tmp/foo.o sleep 1
  Probe point 'do_fork' not found.
  event syntax error: '/tmp/foo.o'
                       \___ You need to check probing points in BPF file

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

 ---

Now, with "__attribute__((section("fork=_do_fork"), used)):

 $ grep _do_fork /proc/kallsyms
 ffffffff81099ab0 T _do_fork
 $ perf record --event /tmp/foo.o sleep 1
 Failed to open kprobe_events: Permission denied
 event syntax error: '/tmp/foo.o'
                      \___ Permission denied

 ---

Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.

Lets try as root instead:

  # perf record --event /tmp/foo.o sleep 1
  Lowering default frequency rate to 1000.
  Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data ]
  # perf evlist
  /tmp/foo.o
  [root@felicio ~]# perf evlist -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
  sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
  sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1

 ---
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      aa3abf30
    • W
      perf tools: Enable passing bpf object file to --event · 84c86ca1
      由 Wang Nan 提交于 
      By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.

After applying this patch, commands like:

 # perf record --event foo.o sleep

become possible.

However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented.  Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.

Commiter notes:

Using it:

  $ ls -la foo.o
  ls: cannot access foo.o: No such file or directory
  $ perf record --event foo.o sleep
  libbpf: failed to open foo.o: No such file or directory
  event syntax error: 'foo.o'
                       \___ BPF object file 'foo.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/build/perf/perf.o
  /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
  $ perf record --event /tmp/build/perf/perf.o sleep
  libbpf: /tmp/build/perf/perf.o is not an eBPF object file
  event syntax error: '/tmp/build/perf/perf.o'
                       \___ BPF object file '/tmp/build/perf/perf.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/foo.o
  /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
  $ perf record --event /tmp/foo.o sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data ]
  $ perf evlist
  /tmp/foo.o
  $ perf evlist  -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  $

So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.

  $ perf report --stdio
  Error:
  The perf.data file has no samples!
  # To display the perf.data header info, please use --header/--header-only options.
  #
  $
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      84c86ca1
    • W
      perf ebpf: Add the libbpf glue · 69d262a9
      由 Wang Nan 提交于 
      The 'bpf-loader.[ch]' files are introduced in this patch. Which will be
the interface between perf and libbpf. bpf__prepare_load() resides in
bpf-loader.c. Following patches will enrich these two files.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      69d262a9
    • W
      perf tools: Make perf depend on libbpf · ed63f34c
      由 Wang Nan 提交于 
      By adding libbpf into perf's Makefile, this patch enables perf to build
libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set.

The newly introduced code is similar to how libapi and libtraceevent
are wired into Makefile.perf.

MANIFEST is also updated for 'make perf-*-src-pkg'.

Append make_no_libbpf to tools/perf/tests/make.

The 'bpf' feature check is appended into default FEATURE_TESTS and
FEATURE_DISPLAY, so perf will check the API version of bpf in
/path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except
when we are trying to port this code to an old kernel.

Error messages are also updated to notify users about the lack of BPF
support in 'perf record' if libelf is missing or the BPF API check
failed.

tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf
files when working on perf using tools/perf/tags.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com
[ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ed63f34c
    • J
      perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore · 443f8c75
      由 Jiri Olsa 提交于 
      Currently we split symbols based on the map comparison, but symbols are stored
within dso objects and maps could point into same dso objects (kernel maps).

Hence we could end up changing rbtree we are currently iterating and mess it
up. It's easily reproduced on s390x by running:

  $ perf record -a -- sleep 3
  $ perf buildid-list -i perf.data --with-hits

The fix is to compare dso objects instead.
Reported-by: NMichael Petlan <mpetlan@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      443f8c75
    • W
      perf tools: Enable pre-event inherit setting by config terms · 374ce938
      由 Wang Nan 提交于 
      This patch allows perf record setting event's attr.inherit bit by
config terms like:

  # perf record -e cycles/no-inherit/ ...
  # perf record -e cycles/inherit/ ...

So user can control inherit bit for each event separately.

In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.

Basic result with and without inherit:

  # perf record -e cycles -e instructions ./a.out
  [ perf record: Woken up 9 times to write data ]
  [ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
  # perf report --stdio
  # ...
  # Samples: 23K of event 'cycles'
  # Event count (approx.): 23641752891
  ...
  # Samples: 24K of event 'instructions'
  # Event count (approx.): 30428312415

  # perf record -i -e cycles -e instructions ./a.out
  [ perf record: Woken up 5 times to write data ]
  [ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
  ...
  # Samples: 12K of event 'cycles'
  # Event count (approx.): 11699501775
  ...
  # Samples: 12K of event 'instructions'
  # Event count (approx.): 15058023559

Cancel inherit for one event when globally enable:

  # perf record -e cycles/no-inherit/ -e instructions ./a.out
  [ perf record: Woken up 7 times to write data ]
  [ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
  ...
  # Samples: 12K of event 'cycles/no-inherit/'
  # Event count (approx.): 11895759282
 ...
  # Samples: 24K of event 'instructions'
  # Event count (approx.): 30668000441

Enable inherit for one event when globally disable:

  # perf record -i -e cycles/inherit/ -e instructions ./a.out
  [ perf record: Woken up 7 times to write data ]
  [ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
  ...
  # Samples: 23K of event 'cycles/inherit/'
  # Event count (approx.): 23285400229
  ...
  # Samples: 11K of event 'instructions'
  # Event count (approx.): 14969050259

Committer note:

One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:

  # perf record -e cycles -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:

  # perf record --no-inherit -e cycles -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1

No inherit bit set, then disabling it and setting just on the cycles event:

  # perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
  # perf evlist -v
  cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:

  [root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|ID|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
  ------------------------------------------------------------
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    config                           0x1
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|ID|CPU|PERIOD
    read_format                      ID
    disabled                         1
    freq                             1
    sample_id_all                    1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8

<SNIP>
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      374ce938
    • D
      perf symbols: we can now read separate debug-info files based on a build ID · 5baecbcd
      由 Dima Kogan 提交于 
      Recent GDB (at least on a vanilla Debian box) looks for debug information in

  /usr/lib/debug/.build-id/nn/nnnnnnn

where nn/nnnnnn is the build-id of the stripped ELF binary. This is
documented here:

  https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html

This was not working in perf because we didn't read the build id until
AFTER we searched for the separate debug information file. This patch
reads the build ID and THEN does the search.
Signed-off-by: NDima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5baecbcd