Pull btrfs updates from Chris Mason:
 "I've been running these through a longer set of load tests because my
  commits change the free space cache writeout.  It fixes commit stalls
  on large filesystems (~20T space used and up) that we have been
  triggering here.  We were seeing new writers blocked for 10 seconds or
  more during commits, which is far from good.

  Josef and I fixed up ENOSPC aborts when deleting huge files (3T or
  more), that are triggered because our metadata reservations were not
  properly accounting for crcs and were not replenishing during the
  truncate.

  Also in this series, a number of qgroup fixes from Fujitsu and Dave
  Sterba collected most of the pending cleanups from the list"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (93 commits)
  btrfs: quota: Update quota tree after qgroup relationship change.
  btrfs: quota: Automatically update related qgroups or mark INCONSISTENT flags when assigning/deleting a qgroup relations.
  btrfs: qgroup: clear STATUS_FLAG_ON in disabling quota.
  btrfs: Update btrfs qgroup status item when rescan is done.
  btrfs: qgroup: Fix dead judgement on qgroup_rescan_leaf() return value.
  btrfs: Don't allow subvolid >= (1 << BTRFS_QGROUP_LEVEL_SHIFT) to be created
  btrfs: Check qgroup level in kernel qgroup assign.
  btrfs: qgroup: allow to remove qgroup which has parent but no child.
  btrfs: qgroup: return EINVAL if level of parent is not higher than child's.
  btrfs: qgroup: do a reservation in a higher level.
  Btrfs: qgroup, Account data space in more proper timings.
  Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.
  Btrfs: qgroup: free reserved in exceeding quota.
  Btrfs: qgroup: cleanup, remove an unsued parameter in btrfs_create_qgroup().
  btrfs: qgroup: fix limit args override whole limit struct
  btrfs: qgroup: update limit info in function btrfs_run_qgroups().
  btrfs: qgroup: consolidate the parameter of fucntion update_qgroup_limit_item().
  btrfs: qgroup: update qgroup in memory at the same time when we update it in btree.
  btrfs: qgroup: inherit limit info from srcgroup in creating snapshot.
  btrfs: Support busy loop of write and delete
  ...

Pull xfs update from Dave Chinner:
 "This update contains:

   - RENAME_WHITEOUT support

   - conversion of per-cpu superblock accounting to use generic counters

   - new inode mmap lock so that we can lock page faults out of
     truncate, hole punch and other direct extent manipulation functions
     to avoid racing mmap writes from causing data corruption

   - rework of direct IO submission and completion to solve data
     corruption issue when running concurrent extending DIO writes.
     Also solves problem of running IO completion transactions in
     interrupt context during size extending AIO writes.

   - FALLOC_FL_INSERT_RANGE support for inserting holes into a file via
     direct extent manipulation to avoid needing to copy data within the
     file

   - attribute block header field overflow fix for 64k block size
     filesystems

   - Lots of changes to log messaging to be more informative and concise
     when errors occur.  Also prevent a lot of unnecessary log spamming
     due to cascading failures in error conditions.

   - lots of cleanups and bug fixes

  One thing of note is the direct IO fixes that we merged last week
  after the window opened.  Even though a little late, they fix a user
  reported data corruption and have been pretty well tested.  I figured
  there was not much point waiting another 2 weeks for -rc1 to be
  released just so I could send them to you..."

* tag 'xfs-for-linus-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
  xfs: using generic_file_direct_write() is unnecessary
  xfs: direct IO EOF zeroing needs to drain AIO
  xfs: DIO write completion size updates race
  xfs: DIO writes within EOF don't need an ioend
  xfs: handle DIO overwrite EOF update completion correctly
  xfs: DIO needs an ioend for writes
  xfs: move DIO mapping size calculation
  xfs: factor DIO write mapping from get_blocks
  xfs: unlock i_mutex in xfs_break_layouts
  xfs: kill unnecessary firstused overflow check on attr3 leaf removal
  xfs: use larger in-core attr firstused field and detect overflow
  xfs: pass attr geometry to attr leaf header conversion functions
  xfs: disallow ro->rw remount on norecovery mount
  xfs: xfs_shift_file_space can be static
  xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate
  fs: Add support FALLOC_FL_INSERT_RANGE for fallocate
  xfs: Fix incorrect positive ENOMEM return
  xfs: xfs_mru_cache_insert() should use GFP_NOFS
  xfs: %pF is only for function pointers
  xfs: fix shadow warning in xfs_da3_root_split()
  ...

Commit cae2a173 ("x86: clean up/fix 'copy_in_user()' tail zeroing")
fixed the failure case tail zeroing of one special case of the x86-64
generic user-copy routine, namely when used for the user-to-user case
("copy_in_user()").

But in the process it broke an even more unusual case: using the user
copy routine for kernel-to-kernel copying.

Now, normally kernel-kernel copies are obviously done using memcpy(),
but we have a couple of special cases when we use the user-copy
functions.  One is when we pass a kernel buffer to a regular user-buffer
routine, using set_fs(KERNEL_DS).  That's a "normal" case, and continued
to work fine, because it never takes any faults (with the possible
exception of a silent and successful vmalloc fault).

But Jan Beulich pointed out another, very unusual, special case: when we
use the user-copy routines not because it's a path that expects a user
pointer, but for a couple of ftrace/kgdb cases that want to do a kernel
copy, but do so using "unsafe" buffers, and use the user-copy routine to
gracefully handle faults.  IOW, for probe_kernel_write().

And that broke for the case of a faulting kernel destination, because we
saw the kernel destination and wanted to try to clear the tail of the
buffer.  Which doesn't work, since that's what faults.

This only triggers for things like kgdb and ftrace users (eg trying
setting a breakpoint on read-only memory), but it's definitely a bug.
The fix is to not compare against the kernel address start (TASK_SIZE),
but instead use the same limits "access_ok()" uses.
Reported-and-tested-by: NJan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull audit fixes from Paul Moore:
 "Seven audit patches for v4.1, all bug fixes.

  The largest, and perhaps most significant commit helps resolve some
  memory pressure issues related to the inode cache and audit, there are
  also a few small commits which help resolve some timing issues with
  the audit log queue, and the rest fall into the always popular "code
  clean-up" category.

  In general, nothing really substantial, just a nice set of maintenance
  patches"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: Remove condition which always evaluates to false
  audit: reduce mmap_sem hold for mm->exe_file
  audit: consolidate handling of mm->exe_file
  audit: code clean up
  audit: don't reset working wait time accidentally with auditd
  audit: don't lose set wait time on first successful call to audit_log_start()
  audit: move the tree pruning to a dedicated thread

Pull MTD updates from Brian Norris:
 "Common MTD:

   - Add Kconfig option for keeping both the 'master' and 'partition'
     MTDs registered as devices.  This would really make a better
     default if we could do it over, as it allows a lot more flexibility
     in (1) determining the flash topology of the system from user-space
     and (2) adding temporary partitions at runtime (ioctl(BLKPG)).

     Unfortunately, this would possibly cause user-space breakage, as it
     will cause renumbering of the /dev/mtdX devices.  We'll see if we
     can change this in the future, as there have already been a few
     people looking for this feature, and I know others have just been
     working around our current limitations instead of fixing them this
     way.

   - Along with the previous change, add some additional information to
     sysfs, so user-space can read the offset of each partition within
     its master device

  SPI NOR:

   - add new device tree compatible binding to represent the
     mostly-compatible class of SPI NOR flash which can be detected by
     their extended JEDEC ID bytes, cutting down the duplication of our
     ID tables

   - misc.  new IDs

  Various other miscellaneous fixes and changes"

* tag 'for-linus-20150422' of git://git.infradead.org/linux-mtd: (53 commits)
  mtd: spi-nor: Add support for Macronix mx25u6435f serial flash
  mtd: spi-nor: Add support for Winbond w25q64dw serial flash
  mtd: spi-nor: add support for the Winbond W25X05 flash
  mtd: spi-nor: support en25s64 device
  mtd: m25p80: bind to "nor-jedec" ID, for auto-detection
  Documentation: devicetree: m25p80: add "nor-jedec" binding
  mtd: Make MTD tests cancelable
  mtd: mtd_oobtest: Fix bitflip_limit usage in test case 3
  mtd: docg3: remove invalid __exit annotations
  mtd: fsl_ifc_nand: use msecs_to_jiffies for time conversion
  mtd: atmel_nand: don't map the ROM table if no pmecc table offset in DT
  mtd: atmel_nand: add a definition for the oob reserved bytes
  mtd: part: Remove partition overlap checks
  mtd: part: Add sysfs variable for offset of partition
  mtd: part: Create the master device node when partitioned
  mtd: ts5500_flash: Fix typo in MODULE_DESCRIPTION in ts5500_flash.c
  mtd: denali: Disable sub-page writes in Denali NAND driver
  mtd: pxa3xx_nand: cleanup wait_for_completion handling
  mtd: nand: gpmi: Check for scan_bbt() error
  mtd: nand: gpmi: fixup return type of wait_for_completion_timeout
  ...

Pull InfiniBand/RDMA updates from Roland Dreier:

 - IPoIB fixes from Doug Ledford and Erez Shitrit

 - iSER updates from Sagi Grimberg

 - mlx4 GUID handling changes from Yishai Hadas

 - other misc fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (51 commits)
  mlx5: wrong page mask if CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for 32Bit architectures
  IB/iser: Rewrite bounce buffer code path
  IB/iser: Bump version to 1.6
  IB/iser: Remove code duplication for a single DMA entry
  IB/iser: Pass struct iser_mem_reg to iser_fast_reg_mr and iser_reg_sig_mr
  IB/iser: Modify struct iser_mem_reg members
  IB/iser: Make fastreg pool cache friendly
  IB/iser: Move PI context alloc/free to routines
  IB/iser: Move fastreg descriptor pool get/put to helper functions
  IB/iser: Merge build page-vec into register page-vec
  IB/iser: Get rid of struct iser_rdma_regd
  IB/iser: Remove redundant assignments in iser_reg_page_vec
  IB/iser: Move memory reg/dereg routines to iser_memory.c
  IB/iser: Don't pass ib_device to fall_to_bounce_buff routine
  IB/iser: Remove a redundant struct iser_data_buf
  IB/iser: Remove redundant cmd_data_len calculation
  IB/iser: Fix wrong calculation of protection buffer length
  IB/iser: Handle fastreg/local_inv completion errors
  IB/iser: Fix unload during ep_poll wrong dereference
  ib_srpt: convert printk's to pr_* functions
  ...

Pull Ceph updates from Sage Weil:
 "This time around we have a collection of CephFS fixes from Zheng
  around MDS failure handling and snapshots, support for a new CRUSH
  straw2 algorithm (to sync up with userspace) and several RBD cleanups
  and fixes from Ilya, an error path leak fix from Taesoo, and then an
  assorted collection of cleanups from others"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (28 commits)
  rbd: rbd_wq comment is obsolete
  libceph: announce support for straw2 buckets
  crush: straw2 bucket type with an efficient 64-bit crush_ln()
  crush: ensuring at most num-rep osds are selected
  crush: drop unnecessary include from mapper.c
  ceph: fix uninline data function
  ceph: rename snapshot support
  ceph: fix null pointer dereference in send_mds_reconnect()
  ceph: hold on to exclusive caps on complete directories
  libceph: simplify our debugfs attr macro
  ceph: show non-default options only
  libceph: expose client options through debugfs
  libceph, ceph: split ceph_show_options()
  rbd: mark block queue as non-rotational
  libceph: don't overwrite specific con error msgs
  ceph: cleanup unsafe requests when reconnecting is denied
  ceph: don't zero i_wrbuffer_ref when reconnecting is denied
  ceph: don't mark dirty caps when there is no auth cap
  ceph: keep i_snap_realm while there are writers
  libceph: osdmap.h: Add missing format newlines
  ...

Pull tracing fixes from Steven Rostedt:
 "This adds three fixes for the tracing code.

  The first is a bug when ftrace_dump_on_oops is triggered in atomic
  context and function graph tracer is the tracer that is being
  reported.

  The second fix is bad parsing of the trace_events from the kernel
  command line, where it would ignore specific events if the system name
  is used with defining the event(it enables all events within the
  system).

  The last one is a fix to the TRACE_DEFINE_ENUM(), where a check was
  missing to see if the ptr was incremented to the end of the string,
  but the loop increments it again and can miss the nul delimiter to
  stop processing"

* tag 'trace-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix possible out of bounds memory access when parsing enums
  tracing: Fix incorrect enabling of trace events by boot cmdline
  tracing: Handle ftrace_dump() atomic context in graph_trace_open()

Pull PCI fixes from Bjorn Helgaas:
 "These fix an ia64 regression caused by tighter resource checking we
  merged during the merge window and remove an invalid email address
  from MAINTAINERS.

  Resource management:
    - ia64: Treat all Address Space Descriptors as windows (Bjorn Helgaas)

  Miscellaneous:
    - MAINTAINERS: Remove Mohit Kumar (email bounces) (Bjorn Helgaas)"

* tag 'pci-v4.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ia64/PCI: Treat all host bridge Address Space Descriptors (even consumers) as windows
  MAINTAINERS: Remove Mohit Kumar (email bounces)

Pull watchdog updates from Wim Van Sebroeck:
 "This contains following changes:

   - Octeon: convert to watchdog-API and apply some fixes
   - Cadence wdt: remove dependency on ARCH
   - add DT bindings for qcom + msm
   - bcm281xx: Remove use of seq_printf return value
   - stmp3xxx_rtc_wdt + pnx4008_wdt: fix broken email addresses"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: stmp3xxx_rtc_wdt: fix broken email address
  watchdog: pnx4008_wdt: fix broken email address
  watchdog: octeon: use fixed length string for register names
  watchdog: octeon: fix some trivial coding style issues
  watchdog: octeon: convert to WATCHDOG_CORE API
  watchdog: cadence: Remove Kconfig dependency on ARCH
  ARM: msm: add watchdog entries to DT timer binding doc
  ARM: qcom: add description of KPSS WDT for IPQ8064
  watchdog: qcom: use timer devicetree binding
  watchdog: bcm281xx: Remove use of seq_printf return value

Pull virtio updates from Rusty Russell:
 "Some virtio internal cleanups, a new virtio device "virtio input", and
  a change to allow the legacy virtio balloon.

  Most excitingly, some lguest work! No seriously, I got some cleanup
  patches"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio: drop virtio_device_is_legacy_only
  virtio_pci: support non-legacy balloon devices
  virtio_mmio: support non-legacy balloon devices
  virtio_ccw: support non-legacy balloon devices
  virtio: balloon might not be a legacy device
  virtio_balloon: transitional interface
  virtio_ring: Update weak barriers to use dma_wmb/rmb
  virtio_pci_modern: switch to type-safe io accessors
  virtio_pci_modern: type-safe io accessors
  lguest: handle traps on the "interrupt suppressed" iret instruction.
  virtio: drop a useless config read
  virtio_config: reorder functions
  Add virtio-input driver.
  lguest: suppress interrupts for single insn, not range.
  lguest: simplify lguest_iret
  lguest: rename i386_head.S in the comments
  lguest: explicitly set miscdevice's private_data NULL
  lguest: fix pending interrupt test.

Pull module updates from Rusty Russell:
 "Quentin opened a can of worms by adding extable entry checking to
  modpost, but most architectures seem fixed now.  Thanks to all
  involved.

  Last minute rebase because I noticed a "[PATCH]" had snuck into a
  commit message somehow"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: don't emit section mismatch warnings for compiler optimizations
  modpost: expand pattern matching to support substring matches
  modpost: do not try to match the SHT_NUL section.
  modpost: fix extable entry size calculation.
  modpost: fix inverted logic in is_extable_fault_address().
  modpost: handle -ffunction-sections
  modpost: Whitelist .text.fixup and .exception.text
  params: handle quotes properly for values not of form foo="bar".
  modpost: document the use of struct section_check.
  modpost: handle relocations mismatch in __ex_table.
  scripts: add check_extable.sh script.
  modpost: mismatch_handler: retrieve tosym information only when needed.
  modpost: factorize symbol pretty print in get_pretty_name().
  modpost: add handler function pointer to sectioncheck.
  modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list.
  modpost: add strict white-listing when referencing sections.
  module: do not print allocation-fail warning on bogus user buffer size
  kernel/module.c: fix typos in message about unused symbols

This reverts commit 8d63d99a.

It causes in VM mapping refcount errors:

  page:ffffea0010a15040 count:0 mapcount:1 mapping:          (null) index:0x0
  flags: 0x8000000000008014(referenced|dirty|tail)
  page dumped because: VM_BUG_ON_PAGE(page_mapcount(page) != 0)
  ------------[ cut here ]------------
  kernel BUG at mm/swap.c:134!

as reported by Borislav Petkov
Reported-and-tested-by: NBorislav Petkov <bp@alien8.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull MMC fixes from Ulf Hansson:
 "Here is two mmc core fixes for v.4.1 rc1:

   - fix error code propagation in mmc_pwrseq_simple_alloc()

   - revert 'mmc: core: Convert mmc_driver to device_driver'"

* tag 'mmc-4.1-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
  Revert "mmc: core: Convert mmc_driver to device_driver"
  mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()

HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected
so remove the user prompt for this
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC late changes from Olof Johansson:
 "We were expecting to sit on this branch through most of the merge
  window since the contents was merged into our tree late, but we ended
  up sitting on all of our contents so it can go in with the rest.

  The contents here is:

   - a large branch of cleanups of the CM/PRM blocks on OMAP.

   - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.

   - a branch with DT updates for Freescale i.MX.  including some
     shuffling from .dts to .dtsi (include) files that causes a little
     churn"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
  ARM: OMAP4+: control: add support for initializing control module via DT
  ARM: dts: dra7: add minimal l4 bus layout with control module support
  ARM: dts: omap5: add minimal l4 bus layout with control module support
  ARM: OMAP4+: control: remove support for legacy pad read/write
  ARM: OMAP4: display: convert display to use syscon for dsi muxing
  ARM: dts: omap4: add minimal l4 bus layout with control module support
  ARM: dts: am4372: add minimal l4 bus layout with control module support
  ARM: dts: am43xx-epos-evm: fix pinmux node layout
  ARM: dts: am33xx: add minimal l4 bus layout with control module support
  ARM: dts: omap3: add minimal l4 bus layout with control module support
  ARM: dts: omap24xx: add minimal l4 bus layout with control module support
  ARM: OMAP2+: control: add syscon support for register accesses
  ARM: OMAP2+: id: cache omap_type value
  ARM: OMAP2+: control: remove API for getting control module base address
  ARM: OMAP2+: clock: add low-level support for regmap
  ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
  ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
  ARM: OMAP2+: CM: move SoC specific init calls within a generic API
  ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
  ...

Pull ARM SoC 64-bit changes from Olof Johansson:
 "Mostly DT updates for arm64, but also a couple of Kconfig additions.

  Main contents:

   - Qualcomm MSM8916/APQ8016

   - Spreadtrum SC9836

   - Xilinx ZynqMP

   - pincontrol entries for MediaTek MT8173"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: add interrupt-affinity property to pmu node for juno
  arm64: dts: Add Qualcomm APQ8016 SBC evaluation board dts
  arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts
  arm64: dts: sprd: adding coresight entries to Spreadtrum SC9836
  arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig
  arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
  ARM64: Add new Xilinx ZynqMP SoC
  arm64: qcom: Add support for Qualcomm MSM8916 SoC
  arm64: dts: mt8173: Add pinctrl/GPIO/EINT node for mt8173.
  arm64: mediatek: Select PINCTRL for Mediatek platform

Pull ARM SoC defconfig updates from Olof Johansson:
 "We keep collecting defconfig updates in a separate branch mostly to
  encourage people to handle them separately and avoid conflicts between
  different topics.

  Most of these are enablement of new drivers that have come in, or
  minor config refreshes due to reorderings in Kconfig files, etc.  I.e.
  mostly minor churn of various kinds.

  We might start folding this branch into something else for upstream
  merge since it's so small, but keep it independent in our own tree for
  the above reasons"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  ARM: multi_v7_defconfig: enable alpine platform
  ARM: multi_v7_defconfig: Add gpio-restart driver
  ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module
  ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads
  ARM: multi_v7_defconfig: Enable Tegra ACTMON support
  ARM: configs: remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
  ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
  ARM: exynos_defconfig: Enable HDMI support
  ARM: exynos_defconfig: Enable options to mount a rootfs via NFS
  ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig
  ARM: mvebu: Enable perf support in mvebu_v7_defconfig
  ARM: exynos_defconfig: Enable ChromeOS EC chardev driver
  ARM: exynos_defconfig: Enable CPU idle
  ARM: exynos_defconfig: Enable Marvell WiFi-Ex support
  arm: qcom: Update defconfig
  arm: qcom: Enable lpass clock driver in defconfig
  ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
  ARM: omap2plus_defconfig: Update bluetooth options
  ARM: omap2plus_defconfig: Enable leds-pwm
  ARM: omap1_defconfig: drop obsolete Kconfig symbols
  ...

Pull ARM SoC multiplatform code changes from Olof Johansson:
 "The changes here belong to two main platforms:

   - Atmel At91 is flipping the bit and going multiplatform.  This
     includes some cleanups and removal of code, and the final flip of
     config dependencies

   - Shmobile has several platforms that are going multiplatform, but
     this branch also contains a bunch of cleanups that they weren't
     able to keep separate in a good way.  THere's also a removal of one
     of their SoCs and the corresponding boards (sh7372 and mackerel)"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
  ARM: at91/pm: move the standby functions to pm.c
  ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected
  ARM: at91: add a Kconfig dependency on multi-platform
  ARM: at91: drop AT91_TIMER_HZ
  ARM: at91: remove hardware.h
  ARM: at91: remove SoC headers
  ARM: at91: remove useless mach/cpu.h
  ARM: at91: remove unused headers
  ARM: at91: switch at91_dt_defconfig to multiplatform
  ARM: at91: switch to multiplatform
  ARM: shmobile: r8a7778: enable multiplatform target
  ARM: shmobile: bockw: add sound to DT
  ARM: shmobile: r8a7778: add sound to DT
  ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
  DT: i2c: add trivial binding for OKI ML86V7667 video decoder
  ARM: shmobile: r8a7778: common clock framework CPG driver
  ARM: shmobile: bockw dts: set extal clock frequency
  ARM: shmobile: bockw dts: Move Ethernet node to BSC
  ARM: shmobile: r8a73a4: Remove legacy code
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...

Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  In this case, that includes:

   - support for the new Annapurna Labs "Alpine" platform

   - a rework greatly simplifying adding new platform support to the
     MCPM subsystem (Multi-cluster power management)

   - cpuidle and PM improvements for Exynos3250

   - misc updates for Renesas, OMAP, Meson, i.MX.  Some of these could
     have gone in other branches but ended up here for various reasons"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  ARM: alpine: add support for generic pci
  ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: DCSCB: tighten CPU validity assertion
  ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
  ARM: MCPM: move the algorithmic complexity to the core code
  ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC
  ARM: EXYNOS: add AFTR mode support for Exynos3250
  ARM: EXYNOS: add code for setting/clearing boot flag
  ARM: EXYNOS: fix CPU1 hotplug on Exynos3250
  ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
  ARM: cygnus: fix const declaration bcm_cygnus_dt_compat
  ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
  ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
  ARM: EXYNOS: Remove left over 'extra_save'
  ARM: EXYNOS: Constify exynos_pm_data array
  ARM: EXYNOS: use static in suspend.c
  ARM: EXYNOS: Use platform device name as power domain name
  ARM: EXYNOS: add support for async-bridge clocks for pm_domains
  ARM: omap-device: add missed callback for suspend-to-disk
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...

Pull ARM SoC fixes from Olof Johansson:
 "Here's the usual "low-priority fixes that didn't make it into the last
  few -rcs, with a twist: We had a fixes pull request that I didn't send
  in time to get into 4.0, so we'll send some of them to Greg for
  -stable as well.

  Contents here is as usual not all that controversial:

   - a handful of randconfig fixes from Arnd, in particular for older
     Samsung platforms

   - Exynos fixes, !SMP building, DTS updates for MMC and lid switch

   - Kbuild fix to create output subdirectory for DTB files

   - misc minor fixes for OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  ARM: at91/dt: sama5d3 xplained: add phy address for macb1
  kbuild: Create directory for target DTB
  ARM: mvebu: Disable CPU Idle on Armada 38x
  ARM: DRA7: Enable Cortex A15 errata 798181
  ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102
  ARM: dts: DRA7: Add bandgap and related thermal nodes
  bus: ocp2scp: SYNC2 value should be changed to 0x6
  ARM: dts: am4372: Add "ti,am437x-ocp2scp" as compatible string for OCP2SCP
  ARM: OMAP2+: remove superfluous NULL pointer check
  ARM: EXYNOS: Fix build breakage cpuidle on !SMP
  ARM: dts: fix lid and power pin-functions for exynos5250-spring
  ARM: dts: fix mmc node updates for exynos5250-spring
  ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
  MAINTAINERS: add OMAP defconfigs under OMAP SUPPORT
  ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
  ARM: cns3xxx: don't export static symbol
  ARM: S3C24XX: avoid a Kconfig warning
  ARM: S3C24XX: fix header file inclusions
  ARM: S3C24XX: fix building without PM_SLEEP
  ARM: S3C24XX: use SAMSUNG_WAKEMASK for s3c2416
  ...

After the switch to blk-mq rbd_wq processes requests, not devices.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Sync up feature bits and enable CEPH_FEATURE_CRUSH_V4.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This is an improved straw bucket that correctly avoids any data movement
between items A and B when neither A nor B's weights are changed.  Said
differently, if we adjust the weight of item C (including adding it anew
or removing it completely), we will only see inputs move to or from C,
never between other items in the bucket.

Notably, there is not intermediate scaling factor that needs to be
calculated.  The mapping function is a simple function of the item weights.

The below commits were squashed together into this one (mostly to avoid
adding and then yanking a ~6000 lines worth of crush_ln_table):

- crush: add a straw2 bucket type
- crush: add crush_ln to calculate nature log efficently
- crush: improve straw2 adjustment slightly
- crush: change crush_ln to provide 32 more digits
- crush: fix crush_get_bucket_item_weight and bucket destroy for straw2
- crush/mapper: fix divide-by-0 in straw2
  (with div64_s64() for draw = ln / w and INT64_MIN -> S64_MIN - need
   to create a proper compat.h in ceph.git)

Reflects ceph.git commits 242293c908e923d474910f2b8203fa3b41eb5a53,
                          32a1ead92efcd351822d22a5fc37d159c65c1338,
                          6289912418c4a3597a11778bcf29ed5415117ad9,
                          35fcb04e2945717cf5cfe150b9fa89cb3d2303a1,
                          6445d9ee7290938de1e4ee9563912a6ab6d8ee5f,
                          b5921d55d16796e12d66ad2c4add7305f9ce2353.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Crush temporary buffers are allocated as per replica size configured
by the user.  When there are more final osds (to be selected as per
rule) than the replicas, buffer overlaps and it causes crash.  Now, it
ensures that at most num-rep osds are selected even if more number of
osds are allowed by the rule.

Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0,
                          234b066ba04976783d15ff2abc3e81b6cc06fb10.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

For CEPH_OSD_CMPXATTR_MODE_U64, OSD expects the u64 to be encoded
as string in object's xattr.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>

sb->s_root can be null when umounting
Signed-off-by: NYan, Zheng <zyan@redhat.com>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use fixed length string for register names. This saves 416 bytes
in text size.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Fix some trivial coding style issues to reduce noise from static analyzers.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Convert OCTEON watchdog to WATCHDOG_CORE API. This enables support
for multiple watchdogs on OCTEON boards.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The watchdog has been reworked to use the same DT node as the timer.
This change is updating the device tree doc accordingly.
Signed-off-by: NMathieu Olivari <mathieu@codeaurora.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>