- 25 6月, 2016 6 次提交
-
-
由 Andrey Vagin 提交于
__vfs_write() returns a negative value in a error case. Link: http://lkml.kernel.org/r/20160616083108.6278.65815.stgit@pluto.themaw.netSigned-off-by: NAndrey Vagin <avagin@openvz.org> Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Torsten Hilbrich 提交于
The value `bytes' comes from the filesystem which is about to be mounted. We cannot trust that the value is always in the range we expect it to be. Check its value before using it to calculate the length for the crc32_le call. It value must be larger (or equal) sumoff + 4. This fixes a kernel bug when accidentially mounting an image file which had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance. The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a s_bytes value of 1. This caused an underflow when substracting sumoff + 4 (20) in the call to crc32_le. BUG: unable to handle kernel paging request at ffff88021e600000 IP: crc32_le+0x36/0x100 ... Call Trace: nilfs_valid_sb.part.5+0x52/0x60 [nilfs2] nilfs_load_super_block+0x142/0x300 [nilfs2] init_nilfs+0x60/0x390 [nilfs2] nilfs_mount+0x302/0x520 [nilfs2] mount_fs+0x38/0x160 vfs_kern_mount+0x67/0x110 do_mount+0x269/0xe00 SyS_mount+0x9f/0x100 entry_SYSCALL_64_fastpath+0x16/0x71 Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gang He 提交于
According to some high-load testing, these two BUG assertions were encountered, this led system panic. Actually, there were some discussions about removing these two BUG() assertions, it would not bring any side effect. Then, I did the the following changes, 1) use the existing macro CATCH_BH_JBD_RACES to wrap BUG() in the ocfs2_read_blocks_sync function like before. 2) disable the macro CATCH_BH_JBD_RACES in Makefile by default. Link: http://lkml.kernel.org/r/1466574294-26863-1-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
jbd2_alloc is explicit about its allocation preferences wrt. the allocation size. Sub page allocations go to the slab allocator and larger are using either the page allocator or vmalloc. This is all good but the logic is unnecessarily complex. 1) as per Ted, the vmalloc fallback is a left-over: : jbd2_alloc is only passed in the bh->b_size, which can't be PAGE_SIZE, so : the code path that calls vmalloc() should never get called. When we : conveted jbd2_alloc() to suppor sub-page size allocations in commit : d2eecb03, there was an assumption that it could be called with a size : greater than PAGE_SIZE, but that's certaily not true today. Moreover vmalloc allocation might even lead to a deadlock because the callers expect GFP_NOFS context while vmalloc is GFP_KERNEL. 2) __GFP_REPEAT for requests <= PAGE_ALLOC_COSTLY_ORDER is ignored since the flag was introduced. Let's simplify the code flow and use the slab allocator for sub-page requests and the page allocator for others. Even though order > 0 is not currently used as per above leave that option open. Link: http://lkml.kernel.org/r/1464599699-30131-18-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Hutchings 提交于
Use set_posix_acl, which includes proper permission checks, instead of calling ->set_acl directly. Without this anyone may be able to grant themselves permissions to a file by setting the ACL. Lock the inode to make the new checks atomic with respect to set_acl. (Also, nfsd was the only caller of set_acl not locking the inode, so I suspect this may fix other races.) This also simplifies the code, and ensures our ACLs are checked by posix_acl_valid. The permission checks and the inode locking were lost with commit 4ac7249e, which changed nfsd to use the set_acl inode operation directly instead of going through xattr handlers. Reported-by: NDavid Sinquin <david@sinquin.eu> [agreunba@redhat.com: use set_posix_acl] Fixes: 4ac7249e Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Andreas Gruenbacher 提交于
Factor out part of posix_acl_xattr_set into a common function that takes a posix_acl, which nfsd can also call. The prototype already exists in include/linux/posix_acl.h. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 24 6月, 2016 4 次提交
-
-
由 Chandan Rajendra 提交于
Btrfs code currently assumes stripesize to be same as sectorsize. However Btrfs-progs (until commit df05c7ed455f519e6e15e46196392e4757257305) has been setting btrfs_super_block->stripesize to a value of 4096. This commit makes sure that the value of btrfs_super_block->stripesize is a power of 2. Later, it unconditionally sets btrfs_root->stripesize to sectorsize. Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Wang Xiaoguang 提交于
When doing truncate operation, btrfs_setsize() will first call truncate_setsize() to set new inode->i_size, but if later btrfs_truncate() fails, btrfs_setsize() will call "i_size_write(inode, BTRFS_I(inode)->disk_i_size)" to reset the inmemory inode size, now bug occurs. It's because for truncate case btrfs_ordered_update_i_size() directly uses inode->i_size to update BTRFS_I(inode)->disk_i_size, indeed we should use the "offset" argument to update disk_i_size. Here is the call graph: ==>btrfs_truncate() ====>btrfs_truncate_inode_items() ======>btrfs_ordered_update_i_size(inode, last_size, NULL); Here btrfs_ordered_update_i_size()'s offset argument is last_size. And below test case can reveal this bug: dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100 dev=$(losetup --show -f fs.img) mkdir -p /mnt/mntpoint mkfs.btrfs -f $dev mount $dev /mnt/mntpoint cd /mnt/mntpoint echo "workdir is: /mnt/mntpoint" blocksize=$((128 * 1024)) dd if=/dev/zero of=testfile bs=$blocksize count=1 sync count=$((17*1024*1024*1024/blocksize)) echo "file size is:" $((count*blocksize)) for ((i = 1; i <= $count; i++)); do i=$((i + 1)) dst_offset=$((blocksize * i)) xfs_io -f -c "reflink testfile 0 $dst_offset $blocksize"\ testfile > /dev/null done sync truncate --size 0 testfile ls -l testfile du -sh testfile exit In this case, truncate operation will fail for enospc reason and "du -sh testfile" returns value greater than 0, but testfile's size is 0, we need to reflect correct inode->i_size. Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Liu Bo 提交于
map_private_extent_buffer() can return -EINVAL in two different cases, 1. when the requested contents span two pages if nodesize is larger than pagesize, 2. when it detects something insane. The 2nd one used to be only a WARN_ON(1), and we decided to return a error to callers, but we didn't fix up all its callers, which will be addressed by this patch. Without this, btrfs may end up with 'general protection', ie. reading invalid memory. Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the kern_mount() error handling case instead of 0(ret is set to 0 by register_filesystem), as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
- 23 6月, 2016 4 次提交
-
-
由 Josef Bacik 提交于
Before we write into prealloc/nocow space we have to make sure that there are no references to the extents we are writing into, which means checking the extent tree and csum tree in the case of nocow. So we don't want to do the nocow dance unless we can't reserve data space, since it's a serious drag on performance. With the following sequence fallocate -l10737418240 /mnt/btrfs-test/file cp --reflink /mnt/btrfs-test/file /mnt/btrfs-test/link fio --name=randwrite --rw=randwrite --bs=4k --filename=/mnt/btrfs-test/file \ --end_fsync=1 we get the worst case scenario where we have to fall back on to doing the check anyway. Without this patch lat (usec): min=5, max=111598, avg=27.65, stdev=124.51 write: io=10240MB, bw=126876KB/s, iops=31718, runt= 82646msec With this patch lat (usec): min=3, max=91210, avg=14.09, stdev=110.62 write: io=10240MB, bw=212753KB/s, iops=53188, runt= 49286msec We get twice the throughput, half of the runtime, and half of the average latency. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> [ PAGE_CACHE_ removal related fixups ] Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Chris Mason 提交于
"Btrfs: track transid for delayed ref flushing" was deadlocking on btrfs_attach_transaction because its not safe to call from the async delayed ref start code. This commit brings back btrfs_join_transaction instead and checks for a blocked commit. Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Josef Bacik 提交于
Using the offwakecputime bpf script I noticed most of our time was spent waiting on the delayed ref throttling. This is what is supposed to happen, but sometimes the transaction can commit and then we're waiting for throttling that doesn't matter anymore. So change this stuff to be a little smarter by tracking the transid we were in when we initiated the throttling. If the transaction we get is different then we can just bail out. This resulted in a 50% speedup in my fs_mark test, and reduced the amount of time spent throttling by 60 seconds over the entire run (which is about 30 minutes). Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Kirill A. Shutemov 提交于
During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Cc: stable@vger.kernel.org Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by: NRichard Weinberger <richard@nod.at> Acked-by: NChristoph Hellwig <hch@lst.de>
-
- 20 6月, 2016 1 次提交
-
-
由 Al Viro 提交于
Check for d_unhashed() while searching in in-lookup hash was absolutely wrong. Worse, it masked a deadlock on dget() done under bitlock that nests inside ->d_lock. Thanks to J. R. Okajima for spotting it. Spotted-by: N"J. R. Okajima" <hooanon05g@gmail.com> Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 6月, 2016 8 次提交
-
-
由 Chandan Rajendra 提交于
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence restricting stripesize to be equal to sectorsize would cause super block validation to return an error on architectures where PAGE_SIZE is not equal to 4096. Hence as a workaround, this commit allows stripesize to be set to 4096 bytes. Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Introduced in 2c1984f2 ("btrfs: build fixup for qgroup_account_snapshot") as temporary bisectability build fixup. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We've renamed btrfs_std_error, this one is left from last merge. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Zygo Blaxell 提交于
This fixes a problem introduced in commit 2f3165ec "btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes". open_ctree eventually calls btrfs_replay_log which in turn calls btrfs_commit_super which tries to lock the cleaner_mutex, causing a recursive mutex deadlock during mount. Instead of playing whack-a-mole trying to keep up with all the functions that may want to lock cleaner_mutex, put all the cleaner_mutex lockers back where they were, and attack the problem more directly: keep cleaner_kthread asleep until the filesystem is mounted. When filesystems are mounted read-only and later remounted read-write, open_ctree did not set fs_info->open and neither does anything else. Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs nor cleaner_kthread get confused by the common case of "/" filesystem read-only mount followed by read-write remount. Signed-off-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
This is just a screwup for developers, so change it to an ASSERT() so developers notice when things go wrong and deal with the error appropriately if ASSERT() isn't enabled. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
The test for !trans->blocks_used in btrfs_abort_transaction is insufficient to determine whether it's safe to drop the transaction handle on the floor. btrfs_cow_block, informed by should_cow_block, can return blocks that have already been CoW'd in the current transaction. trans->blocks_used is only incremented for new block allocations. If an operation overlaps the blocks in the current transaction entirely and must abort the transaction, we'll happily let it clean up the trans handle even though it may have modified the blocks and will commit an incomplete operation. In the long-term, I'd like to do closer tracking of when the fs is actually modified so we can still recover as gracefully as possible, but that approach will need some discussion. In the short term, since this is the only code using trans->blocks_used, let's just switch it to a bool indicating whether any blocks were used and set it when should_cow_block returns false. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer via alloc_extent_buffer(). An unaligned eb can have more pages than it should have, which ends up extent buffer's leak or some corrupted content in extent buffer. This adds a warning to let us quickly know what was happening. Now that alloc_extent_buffer() no more returns NULL, this changes its caller and callers of its caller to match with the new error handling. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Heinrich Schuchardt 提交于
Component mirror_num of struct btrfsic_block is defined as unsigned int. Use %u as format specifier. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 16 6月, 2016 3 次提交
-
-
由 Oleg Drokin 提交于
Move the state selection logic inside from the caller, always making it return correct stp to use. Signed-off-by: NJ . Bruce Fields <bfields@fieldses.org> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Oleg Drokin 提交于
To avoid racing entry into nfs4_get_vfs_file(). Make init_open_stateid() return with locked stateid to be unlocked by the caller. Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Oleg Drokin 提交于
It used to be the case that state had an rwlock that was locked for write by downgrades, but for read for upgrades (opens). Well, the problem is if there are two competing opens for the same state, they step on each other toes potentially leading to leaking file descriptors from the state structure, since access mode is a bitmap only set once. Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 15 6月, 2016 5 次提交
-
-
由 J. Bruce Fields 提交于
Also simplify the logic a bit. Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Acked-by: NTrond Myklebust <trondmy@primarydata.com>
-
由 Miklos Szeredi 提交于
Fix a regression when creating a file over a whiteout. The new file/directory needs to use the current fsuid/fsgid, not the ones from the mounter's credentials. The refcounting is a bit tricky: prepare_creds() sets an original refcount, override_creds() gets one more, which revert_cred() drops. So 1) we need to expicitly put the mounter's credentials when overriding with the updated one 2) we need to put the original ref to the updated creds (and this can safely be done before revert_creds(), since we'll still have the ref from override_creds()). Reported-by: NStephen Smalley <sds@tycho.nsa.gov> Fixes: 3fe6e52f ("ovl: override creds with the ones from the superblock mounter") Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Nicolai Stange 提交于
Debugfs' open_proxy_open(), the ->open() installed at all inodes created through debugfs_create_file_unsafe(), - grabs a reference to the original file_operations instance passed to debugfs_create_file_unsafe() via fops_get(), - installs it at the file's ->f_op by means of replace_fops() - and calls fops_put() on it. Since the semantics of replace_fops() are such that the reference's ownership is transferred, the subsequent fops_put() will result in a double release when the file is eventually closed. Currently, this is not an issue since fops_put() basically does a module_put() on the file_operations' ->owner only and there don't exist any modules calling debugfs_create_file_unsafe() yet. This is expected to change in the future though, c.f. commit c6468808 ("debugfs: add support for self-protecting attribute file fops"). Remove the call to fops_put() from open_proxy_open(). Fixes: 9fd4dcec ("debugfs: prevent access to possibly dead file_operations at file open") Signed-off-by: NNicolai Stange <nicstange@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nicolai Stange 提交于
Debugfs' full_proxy_open(), the ->open() installed at all inodes created through debugfs_create_file(), - grabs a reference to the original struct file_operations instance passed to debugfs_create_file(), - dynamically allocates a proxy struct file_operations instance wrapping the original - and installs this at the file's ->f_op. Afterwards, it calls the original ->open() and passes its return value back to the VFS layer. Now, if that return value indicates failure, the VFS layer won't ever call ->release() and thus, neither the reference to the original file_operations nor the memory for the proxy file_operations will get released, i.e. both are leaked. Upon failure of the original fops' ->open(), undo the proxy installation. That is: - Set the struct file ->f_op to what it had been when full_proxy_open() was entered. - Drop the reference to the original file_operations. - Free the memory holding the proxy file_operations. Fixes: 49d200de ("debugfs: prevent access to removed files' private data") Signed-off-by: NNicolai Stange <nicstange@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric W. Biederman 提交于
In rare cases it is possible for s_flags & MS_RDONLY to be set but MNT_READONLY to be clear. This starting combination can cause fs_fully_visible to fail to ensure that the new mount is readonly. Therefore force MNT_LOCK_READONLY in the new mount if MS_RDONLY is set on the source filesystem of the mount. In general both MS_RDONLY and MNT_READONLY are set at the same for mounts so I don't expect any programs to care. Nor do I expect MS_RDONLY to be set on proc or sysfs in the initial user namespace, which further decreases the likelyhood of problems. Which means this change should only affect system configurations by paranoid sysadmins who should welcome the additional protection as it keeps people from wriggling out of their policies. Cc: stable@vger.kernel.org Fixes: 8c6cf9cc ("mnt: Modify fs_fully_visible to deal with locked ro nodev and atime") Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 14 6月, 2016 1 次提交
-
-
由 Geert Uytterhoeven 提交于
On 32-bit: fs/nfsd/blocklayout.c: In function ‘nfsd4_block_get_device_info_scsi’: fs/nfsd/blocklayout.c:337: warning: integer constant is too large for ‘long’ type fs/nfsd/blocklayout.c:344: warning: integer constant is too large for ‘long’ type fs/nfsd/blocklayout.c: In function ‘nfsd4_scsi_fence_client’: fs/nfsd/blocklayout.c:385: warning: integer constant is too large for ‘long’ type Add the missing "ULL" postfix to 64-bit constant NFSD_MDS_PR_KEY to fix this. Fixes: f99d4fbd ("nfsd: add SCSI layout support") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 12 6月, 2016 1 次提交
-
-
由 Al Viro 提交于
* make autofs4_expire_indirect() skip the dentries being in process of expiry * do *not* mess with list_move(); making sure that dentry with AUTOFS_INF_EXPIRING are not picked for expiry is enough. * do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb() there. Clear it at the same time we clear EXPIRING. Makes a bunch of tests simpler. * rename NO_RCU to WANT_EXPIRE, which is what it really is. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 6月, 2016 2 次提交
-
-
由 Jann Horn 提交于
This prevents users from triggering a stack overflow through a recursive invocation of pagefault handling that involves mapping procfs files into virtual memory. Signed-off-by: NJann Horn <jannh@google.com> Acked-by: NTyler Hicks <tyhicks@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jann Horn 提交于
This prevents stacking filesystems (ecryptfs and overlayfs) from using procfs as lower filesystem. There is too much magic going on inside procfs, and there is no good reason to stack stuff on top of procfs. (For example, procfs does access checks in VFS open handlers, and ecryptfs by design calls open handlers from a kernel thread that doesn't drop privileges or so.) Signed-off-by: NJann Horn <jannh@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 6月, 2016 1 次提交
-
-
由 Al Viro 提交于
d_walk() relies upon the tree not getting rearranged under it without rename_lock being touched. And we do grab rename_lock around the places that change the tree topology. Unfortunately, branch reordering is just as bad from d_walk() POV and we have two places that do it without touching rename_lock - one in handling of cursors (for ramfs-style directories) and another in autofs. autofs one is a separate story; this commit deals with the cursors. * mark cursor dentries explicitly at allocation time * make __dentry_kill() leave ->d_child.next pointing to the next non-cursor sibling, making sure that it won't be moved around unnoticed before the parent is relocked on ascend-to-parent path in d_walk(). * make d_walk() skip cursors explicitly; strictly speaking it's not necessary (all callbacks we pass to d_walk() are no-ops on cursors), but it makes analysis easier. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 6月, 2016 3 次提交
-
-
由 Mateusz Guzik 提交于
The offset in the core file used to be tracked with ->written field of the coredump_params structure. The field was retired in favour of file->f_pos. However, ->f_pos is not maintained for pipes which leads to breakage. Restore explicit tracking of the offset in coredump_params. Introduce ->pos field for this purpose since ->written was already reused. Fixes: a0083939 ("get rid of coredump_params->written"). Reported-by: NZbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: NMateusz Guzik <mguzik@redhat.com> Reviewed-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
open("/foo/no_such_file", O_RDONLY | O_CREAT) on should fail with EACCES when /foo is not writable; failing with ENOENT is obviously wrong. That got broken by a braino introduced when moving the creat_error logics from atomic_open() to lookup_open(). Easy to fix, fortunately. Spotted-by: N"Yan, Zheng" <ukernel@gmail.com> Tested-by: N"Yan, Zheng" <ukernel@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Ascend-to-parent logics in d_walk() depends on all encountered child dentries not getting freed without an RCU delay. Unfortunately, in quite a few cases it is not true, with hard-to-hit oopsable race as the result. Fortunately, the fix is simiple; right now the rule is "if it ever been hashed, freeing must be delayed" and changing it to "if it ever had a parent, freeing must be delayed" closes that hole and covers all cases the old rule used to cover. Moreover, pipes and sockets remain _not_ covered, so we do not introduce RCU delay in the cases which are the reason for having that delay conditional in the first place. Cc: stable@vger.kernel.org # v3.2+ (and watch out for __d_materialise_dentry()) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 6月, 2016 1 次提交
-
-
由 Eric W. Biederman 提交于
MNT_LOCKED implies on a child mount implies the child is locked to the parent. So while looping through the children the children should be tested (not their parent). Typically an unshare of a mount namespace locks all mounts together making both the parent and the slave as locked but there are a few corner cases where other things work. Cc: stable@vger.kernel.org Fixes: ceeb0e5d ("vfs: Ignore unlocked mounts in fs_fully_visible") Reported-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-