Fixes the constantness of the powerpc bootwrapper's console_ops.write
routine.  Allows printing of constant strings.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add support for the 'll' (long long) printf qualifier in the powerpc zImage
bootwrapper.  This is useful for bootwrapper debugging on 64 bit platforms.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add signed types to the powerpc zImage bootwrapper. These are needed by the
PS3 hcall interface.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove references to pSeries and OpenFirmware in the __secondary_hold
usage comment.  __secondary_hold is a generic routine and can be used
by other platforms.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a printout of the params value to early_init_devtree.
This value is handy to have for comparison when debugging the
bootwrapper code.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replace the inline asm with bitops in the PS3 interrupt
chip mask routines.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rename the PS3 static symbols node to ppe_id and cpu to thread_id
to clarify usage.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add routines to probe devices present on the system
and to register those devices with the LDM.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Convert the ps3fb device from a platform device to a PS3 system bus device.
Fix the remove and shutdown methods to support kexec and to make ps3fb a
loadable module.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Make the PS3 ps3av driver a loadable module.
  - Replace static data with kmalloc()'ed.
      o Allocate struct ps3av dynamically, as it contains data used as vuart
        receive/transmit buffers
      o Move static recv_buf from ps3av_do_pkt() to struct ps3av
  - Move ps3av_vuart_{read,write}() from drivers/ps3/ps3av_cmd.c to
    drivers/ps3/ps3av.c and make them static as they're used in that file only.
  - Make device a PS3 system-bus device.
  - Update copyright formatting.
  - Make two new routines ps3av_register_flip_ctl() and ps3av_flip_ctl() to
    support late binding of the frame buffer flip control routine.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PS3 sys-manager updates to reflect the new PS3 unifed device support.
Fixups to the PS3 sys-manager driver to properly support sys_reboot().
 - Add varable request_tag to struct ps3_sys_manager_header.
 - Move ctrl_alt_del from PS3_SM_EVENT_POWER_RELEASED to
   PS3_SM_EVENT_POWER_PRESSED.
 - Make the PS3 sys-manager driver a loadable module.
 - Add new file sys-manager-core.c.
 - Add new struct ps3_sys_manager_ops for dynamic binding.
 - Put data sent to device on stack.
 - Add support for PS3_SM_SERVICE_ID_REQUEST_ERROR.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PS3 vuart updates to reflect the new PS3 unified device support.
 - Move vuart devices to the PS3 system bus.
 - Replace use of ps3_vuart_port_device with ps3_system_bus_device.
 - Make the PS3 vuart bus driver a loadable module.
 - Add remove() and shutdown() routines.
 - Move ps3_vuart_work into ps3_vuart_port_priv.tx_list.
 - Remove redundant spinlock ps3_vuart_work.lock.
 - No longer free ps3_vuart_port_device.priv on shutdown.
 - Cleanup Kconfig defs.
 - Export symbols needed for modular port drivers.
 - Arrange to use port numbers found in repository.
 - Fix bugs in ps3_vuart_read_async() and polled reading
 - Cleanup handling of shared interrupt with ps3_vuart_bus_interrupt_get()
   and ps3_vuart_bus_interrupt_put()
 - Add more comments to vuart.c.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Repository updates:
  - Extract ps3_repository_find_bus() from ps3_repository_find_device(), as the
    storage driver needs it.
  - Make ps3_repository_find_device() return -ENODEV if a device is not found,
    just like if a bus is not found.
  - Add ps3_repository_read_vuart_sysmgr_port() and
    ps3_repository_read_vuart_av_port() to get vuart port info.
  - Add device enumeration routines ps3_repository_find_device() and
    ps3_repository_find_devices().
  - Cleanup debug routines.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add modinfo attribute to ps3_system_bus devices.  Also make them all
children of the same ps3_system_bus 'device' so they appear in a
corresponding subdirectory under /sys/devices.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

To allow userspace to automatically load modules, we need to hook up
uevent for ps3_system_bus devices.  I've used the form 'ps3:%d' with
the ps3_match_id, since that's what we use for matching drivers.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rework the PS3 system bus to unify device support.
 - DMA region sizes must be a power of two
 - storage bus DMA updates:
  - Small fixes for the PS3 DMA core:
      o fix alignment bug
      o kill superfluous test
      o indentation
      o spelling
      o export ps3_dma_region_{create,free}()
  - ps3_dma_region_init():
      o Add `addr' and `len' parameters, so you can create a DMA region that
        does not cover all memory (use `NULL' and `0' to cover all memory).
	This is needed because there are not sufficient IOMMU resources to have
	all DMA regions cover all memory.
      o Uninline
  - Added remove and shutdown routines to all drivers.
  - Added loadable module support to all drivers.
  - Added HV calls for iopte management (needed by sound driver).
Signed-off-by: NMOKUNO Masakazu <mokuno@sm.sony.co.jp>
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fixup the core platform parts needed for kexec to work on the PS3.
 - Setup ps3_hpte_clear correctly.
 - Mask interrupts on irq removal.
 - Release all hypervisor resources.
 - Create new routine ps3_shutdown_IRQ()
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Simplify the PS3 definition of DBG.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This just moves the definitions of the PS3 chip_mask routines up
above the irq setup routines.  This change is needed for the
kexec updates that follow.  Also adds some inline documentation
to the routines.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add support for HDMI RGB Full Range mode, which is available on system
software 1.80 or newer.

CC: Masashi Kimoto <Masashi_Kimoto@hq.scei.sony.co.jp>
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix some PS3 build warnings reported by `make C=1'.  You need to
install sparse:
  git://git.kernel.org/pub/scm/devel/sparse/sparse.gitSigned-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use ioremap_flags() to map SPU regions as non-guarded.
Change the use of _ioremap() to ioremap_flags().

CC: Arnd Bergmann <arnd.bergmann@de.ibm.com>
CC: Masato Noguchi <Masato.Noguchi@jp.sony.com>
CC: Takao Shinohara <shin@sm.sony.co.jp>
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a utility routine ps3_compare_firmware_version() to compare system
firmware versions.  Uses the existing ps3_get_firmware_version() routine.
Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Change the PS3 debug routines from using the GCC specific
'__attribute__ ((unused))' to the preprocessor macro
__maybe_unused.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rename the PS3 static symbol virqs to ps3_ipi_virqs to aid in
debugging.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a shutdown method to spu_sysdev_class to allow proper spu resource
cleanup on system shutdown.  This is needed to support kexec on the PS3
platform.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On Power machines supporting VRMA, Kexec/Kdump does not work.
VRMA (virtual real-mode area) means that accesses with IR/DR = 0
(i.e. the MMU "off") actually still go through the hash table,
using entries put there by the hypervisor.

This means that when we clear out the hash table on kexec, we need to
make sure these entries are left untouched.

This also adds plpar_pte_read_raw() on the lines of
plpar_pte_remove_raw().

Signed-off-by : Sachin Sant <sachinp@in.ibm.com>
Signed-off-by : Mohan Kumar M <mohan@in.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In some of the PPC970 based systems, interrupt would be distributed to
offline cpus also even when booted with "maxcpus=1".  So check whether
cpu online map and cpu present map are equal or not.  If they are equal
default_distrib_server is used as interrupt server otherwise boot cpu
(default_server) used as interrupt server.

In addition to this, if an interrupt is assigned to a specific cpu (ie
smp affinity) and if that cpu is not online, the earlier code used to
return the default_distrib_server as interrupt server.  This
introduces an additional parameter to the get_irq function, called
strict_check.  Based on this parameter, if the cpu is not online
either default_distrib_server or -1 is returned.
Signed-off-by: NMohan Kumar M <mohan@in.ibm.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Acked-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On pSeries the firmware features are not setup until ppc_md.init_early,
so we can't do the firmware feature sections fixups till after this.

Currently firmware feature sections is only used on iSeries which inits
the firmware features much earlier.  This is a bug in waiting on
pSeries.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For POWERPC, stolen time accounts for cycles lost to the hypervisor or
PURR cycles attributed to the other SMT thread.  Hence, when a PURR is
available, we should still calculate stolen time, irrespective of being
virtualised.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Specifying 'console=ttyMM0' on the cmdline for the prmpc2800 is no
longer necessary.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When a Marvell MPSC (serial controller) port is the specified
/chosen/stdout-path device, call 'add_preferred_console()' so the user
doesn't have to specify a 'console=ttyMMx' cmdline argument.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds irq_create_direct_mapping().  This routine is
an alternative to irq_create_mapping(), for irq controllers that
can use linux virq numbers directly as hardware numbers.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A future patch will need the logic at the end of irq_create_mapping()
which setups a virq and installs it in the irq_map. So split it out
into a new function irq_setup_virq().
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Uninline virq_to_hw and export it so modules can use it.  The alternative
would be to export the irq_map array instead, but it's an infrequently
called function, and keeping the array unexported seems considerably
cleaner.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The holly support currently has separate rules to wrap its device tree
with its zImage.  This can now be done automatically without the extra
rules so update holly support to use the automatic feature.
Signed-off-by: NMark A. Greer <mgreer@mista.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

There are 2 config options that indicate whether the platform being built
has a device tree source file associated with it.  Namely,
CONFIG_WANT_DEVICE_TREE and CONFIG_DEVICE_TREE.  When CONFIG_WANT_DEVICE_TREE
is 'y' and CONFIG_DEVICE_TREE isn't an empty string, automatically wrap
the specified device tree with the zImage being built.

To achieve this, the 'dts' variable will only be set when the conditions
above are true.  The changes to the zImage.initrd.% and zImage.% rules
cause the device tree to be wrapped when 'dts' is set; otherwise, they
will work as they previosly did (i.e., build a zImage with no device tree).
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Being able to selectively wrap a device tree with the zIimage at build
time has been deemed unnecessary, so this removes Makefile support for
that feature.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

cpu_purr_data is a per-cpu array used to account for stolen time on
partitioned systems.  It used to be the case that cpus accessed each
others' cpu_purr_data, so each entry was protected by a spinlock.

However, the code was reworked ("Simplify stolen time calculation")
with the result that each cpu accesses its own cpu_purr_data and not
those of other cpus.  This means we can get rid of the spinlock as
long as we're careful to disable interrupts when accessing
cpu_purr_data in process context.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>