Impact: reduce kconfig variable scope and clean up

Bartlomiej pointed out that the config dependencies and comments are not right.

update it depend to NUMA, and fix some comments
Reported-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

make intr_remapping.c to include smp.h, so could use boot_cpu_id there

also remove old change that disabling sparseirq with !SMP
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes

if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:

-  make irq_desc to go with affinity aka irq_desc moving etc
-  call move_irq_desc in irq_complete_move()
-  legacy irq_desc is not moved, because they are allocated via static array

for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ingo Molnar wrote:

>>>  drivers/pci/intr_remapping.c: In function 'irq_2_iommu_alloc':
>>>  drivers/pci/intr_remapping.c:72: error: 'boot_cpu_id' undeclared (first use in this function)
>>>  drivers/pci/intr_remapping.c:72: error: (Each undeclared identifier is reported only once
>>>  drivers/pci/intr_remapping.c:72: error: for each function it appears in.)

sparseirq should only be used with SMP for now.

Impact: new feature

Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.

To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.

When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).

This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

My previous patch to make CONFIG_NUMA on x86_32 depend on BROKEN
turned out to be unnecessary, after all, since the source of the
hibernation vs CONFIG_NUMA problem turned out to be the fact that
we didn't take the NUMA KVA remapping into account in the
hibernation code.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build/boot fix for x86/Voyager

This change:

| commit 3d442233
| Author: Jens Axboe <jens.axboe@oracle.com>
| Date:   Thu Jun 26 11:21:34 2008 +0200
|
|     Add generic helpers for arch IPI function calls

didn't wire up the voyager smp call function correctly, so do that
here.  Also make CONFIG_USE_GENERIC_SMP_HELPERS a def_bool y again,
since we now use the generic helpers for every x86 architecture.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <Jens.Axboe@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While investigating the failure of hibernation on 32-bit x86 with
CONFIG_NUMA set, as described in this message
http://marc.info/?l=linux-kernel&m=122634118116226&w=4
I asked some people for help and I was told that it wasn't really
worth the effort, because CONFIG_NUMA was generally broken on 32-bit
x86 systems and it shouldn't be used in such configs.  For this
reason, make CONFIG_NUMA depend on BROKEN instead of EXPERIMENTAL on
x86-32.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Pavel Machek <pavel@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: clarify menuconfig text

Mention ACPI in the top-level menu to give a clue as to where
it lives. This matches what ia64 does.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

clean up ifdefs: change #ifdef CONFIG_X86_32/64 to
CONFIG_HAVE_ATOMIC_IOMAP.

flip around the #ifdef sections to clean up the structure.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on x86/Voyager

Given commits like this:

| Author: Suresh Siddha <suresh.b.siddha@intel.com>
| Date:   Tue Jul 29 10:29:19 2008 -0700
|
|     x86, xsave: enable xsave/xrstor on cpus with xsave support

Which deliberately expose boot cpu dependence to pieces of the system,
I think it's time to explicitly have a variable for it to prevent this
continual misassumption that the boot CPU is zero.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The Intel 7300 Memory Controller supports dynamic throttling of memory which can
be used to save power when system is idle. This driver does the memory
throttling when all CPUs are idle on such a system.

Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet
for the config space description.
Signed-off-by: NAndy Henroid <andrew.d.henroid@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>

Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER.  The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.

This patch was generated mostly by script, and partially by hand.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

http://bugzilla.kernel.org/show_bug.cgi?id=11345Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Using "def_bool n" is pointless, simply using bool here appears more
appropriate.

Further, retaining such options that don't have a prompt and aren't
selected by anything seems also at least questionable.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert the dynarray changes. They need more thought and polishing.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This code is not ready yet.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Ingo said sparse_irq is some intrusive. need to make it selectable

to make it simple, remove irq_desc as parameter in some functions.
(ack, eoi, set_affinity).
may need to make member if irq_chip to take irq_desc, or struct irq later.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

but actually irq still needs to be less than NR_IRQS, because
interrupt[NR_IRQS] in entry.S.

need to enable per_cpu vector...
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This has been deprecated for years, the user space irqbalanced utility
works better with numa, has configurable policies, etc...
Signed-off-by: NYinghai Lu <yhlu.kernel@gmai.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.

Preallocate 32 irq_desc, and irq_desc() will try to get more.

( No change in functionality is expected anywhere, except the odd build
  failure where we missed a code site or where a crossing commit itroduces
  new irq_desc[] usage. )

v2: according to Eric, change get_irq_desc() to irq_desc()
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enable the use of the __mcount_loc infrastructure on x86_64 and i386.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

additional_cpus=<x> parameter is dangerous and broken: for example
if we boot additional_cpus=-2 on a stock dual-core system it will
crash the box on bootup.

So reduce the maze of code a bit by removingthe user-configurability
angle.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x86: allow number of additional hotplug CPUs to be set at compile time, V2

The default number of additional CPU IDs for hotplugging is determined
by asking ACPI or mptables how many "disabled" CPUs there are in the
system, but many systems get this wrong so that e.g. a uniprocessor
machine gets an extra CPU allocated and never switches to single CPU
mode.

And sometimes CPU hotplugging is enabled only for suspend/hibernate
anyway, so the additional CPU IDs are not wanted. Allow the number
to be set to zero at compile time.

Also, force the number of extra CPUs to zero if hotplugging is disabled
which allows removing some conditional code.

Tested on uniprocessor x86_64 that ACPI claims has a disabled processor,
with CPU hotplugging configured.

("After" has the number of additional CPUs set to 0)
Before: NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
After: NR_CPUS: 512, nr_cpu_ids: 1, nr_node_ids 1

[Changed the name of the option and the prompt according to Ingo's
 suggestion.]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This option has been added in v2.6.26 as a default-disabled
feature and went through several revisions since then.

The feature fixes a wide range of MTRR setup problems that BIOSes
leave us with: slow system, slow Xorg, slow system when adding lots
of RAM, etc., so we want to enable it by default for v2.6.28.

See:

  [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs
  http://bugzilla.kernel.org/show_bug.cgi?id=10508

and the test results in:

   http://lkml.org/lkml/2008/9/29/273

1. hpa
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x13c000000 (5056MB), size=  64MB: uncachable, count=1
reg02: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg04: base=0xbf700000 (3063MB), size=   1MB: uncachable, count=1
reg05: base=0xbf800000 (3064MB), size=   8MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 128M        num_reg: 6      lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
range0: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
hole: 000000013c000000 - 0000000140000000
Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC

2. Dylan Taft
reg00: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1
reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg05: base=0xc7e00000 (3198MB), size=   2MB: uncachable, count=1
reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 4M  num_reg: 6      lose RAM: 0M
range0: 0000000000000000 - 00000000c8000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB
hole: 00000000c7e00000 - 00000000c8000000
Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC
rangeX: 0000000100000000 - 0000000130000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB

3. Gabriel
reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0x128000000 (4736MB), size=  64MB: write-back, count=1
reg06: base=0xcf600000 (3318MB), size=   2MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 16M         num_reg: 7      lose RAM: 0M
range0: 0000000000000000 - 00000000d0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
hole: 00000000cf600000 - 00000000cf800000
Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC
rangeX: 0000000100000000 - 000000012c000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB
Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB

4. Mika Fischer
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 16M         num_reg: 5      lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
rangeX: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Combine both generic and arch-specific parts of microcode into a
single module (arch-specific parts are config-dependent).

Also while we are at it, move arch-specific parts from microcode.h
into their respective arch-specific .c files.
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: "Peter Oruba" <peter.oruba@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The AMD IOMMU can generate interrupts for various reasons. This patch
adds the basic interrupt enabling infrastructure to the driver.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This bugzilla:

  http://bugzilla.kernel.org/show_bug.cgi?id=11237

Documents a wide range of systems where the BIOS utilizes the first
64K of physical memory during suspend/resume and other hardware events.

Currently we reserve this memory on all AMI and Phoenix BIOS systems.
Life is too short to hunt subtle memory corruption problems like this,
so we try to be robust by default.

Still, allow this to be overriden: allow users who want that first 64K
of memory to be available to the kernel disable the quirk, via
CONFIG_X86_RESERVE_LOW_64K=n.

Also, allow the early reservation to overlap with other
early reservations.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There's no good reason why a resource_size_t shouldn't just be a
physical address, so simply redefine it in terms of phys_addr_t.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a kernel-wide "phys_addr_t" which is guaranteed to be able to hold
any physical address.  By default it equals the word size of the
architecture, but a 32-bit architecture can set ARCH_PHYS_ADDR_T_64BIT
if it needs a 64-bit phys_addr_t.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

X86_64 part is entirely redundant.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

seccomp is prctl(2)-driven now.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Default the low memory corruption check to off, but make the default setting of
the memory_corruption_check kernel parameter a config parameter.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The corruption check is enabled in Kconfig by default, but disabled at runtime.

This patch adds several kernel parameters to control the corruption
check's behaviour; these are documented in kernel-parameters.txt.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Some BIOSes have been observed to corrupt memory in the low 64k.  This
change:
 - Reserves all memory which does not have to be in that area, to
   prevent it from being used as general memory by the kernel.  Things
   like the SMP trampoline are still in the memory, however.
 - Clears the reserved memory so we can observe changes to it.
 - Adds a function check_for_bios_corruption() which checks and reports on
   memory becoming unexpectedly non-zero.  Currently it's called in the
   x86 fault handler, and the powermanagement debug output.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

HAVE_AOUT doesn't quite do the same thing as the recently removed
ARCH_SUPPORTS_AOUT config option. That was set even on platforms where
binfmt_aout isn't supported, although it's not entirely clear why.

So it's best just to introduce a new symbol, handled consistently with
other similar HAVE_xxx symbols; with a simple 'select' in the arch Kconfig.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We don't need this any more; arguably we never really did.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This fixes a regression that was indirectly caused by commit
1184dc2f ("x86: modify Kconfig to allow
up to 4096 cpus").

Allowing 4k CPU's is not practical at this time, because we still have a
number of places that have several 'cpumask_t's on the stack, and a
4k-bit cpumask is 512 bytes of stack-space for each such variable.  This
literally caused functions like 'smp_call_function_mask' to have a 2.5kB
stack frame, and several functions to have 2kB stackframes.

With an 8kB stack total, smashing the stack was simply much too likely.
At least bugzilla entry

	http://bugzilla.kernel.org/show_bug.cgi?id=11342

was due to this.

The earlier commit to not inline load_module() into sys_init_module()
fixed the particular symptoms of this that Alan Brunelle saw in that
bugzilla entry, but the huge stack waste by cpumask_t's was the more
direct cause.

Some day we'll have allocation helpers that allocate large CPU masks
dynamically, but in the meantime we simply cannot allow cpumasks this
large.

Cc: Alan D. Brunelle <Alan.Brunelle@hp.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>