We want to modify the Protection Key rights inside the kernel, so
we need to change PKRU's contents.  But, if we do a plain
'wrpkru', when we return to userspace we might do an XRSTOR and
wipe out the kernel's 'wrpkru'.  So, we need to go after PKRU in
the xsave buffer.

We do this by:

  1. Ensuring that we have the XSAVE registers (fpregs) in the
     kernel FPU buffer (fpstate)
  2. Looking up the location of a given state in the buffer
  3. Filling in the stat
  4. Ensuring that the hardware knows that state is present there
     (basically that the 'init optimization' is not in place).
  5. Copying the newly-modified state back to the registers if
     necessary.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210235.5A3139BF@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The protection keys register (PKRU) is saved and restored using
xsave.  Define the data structure that we will use to access it
inside the xsave buffer.

Note that we also have to widen the printk of the xsave feature
masks since this is feature 0x200 and we only did two characters
before.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210204.56DF8F7B@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There is an XSAVE state component for Intel Processor Trace (PT).
But, we do not currently use it.

We add a placeholder in the code for it so it is not a mystery and
also so we do not need an explicit enum initialization for Protection
Keys in a moment.

Why don't we use it?

We might end up using this at _some_ point in the future.  But,
this is a "system" state which requires using the currently
unsupported XSAVES feature.  Unlike all the other XSAVE states,
PT state is also not directly tied to a thread.  You might
context-switch between threads, but not want to change any of the
PT state.  Or, you might switch between threads, and *do* want to
change PT state, all depending on what is being traced.

We currently just manually set some MSRs to do this PT context
switching, and it is unclear whether replacing our direct MSR use
with XSAVE will be a net win or loss, both in code complexity and
performance.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: fenghua.yu@intel.com
Cc: linux-mm@kvack.org
Cc: yu-cheng.yu@intel.com
Link: http://lkml.kernel.org/r/20160212210158.5E4BCAE2@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This issue is a fallout from the command-line parsing move.

When "eagerfpu=off" is given as a command-line input, the kernel
should disable MPX support. The decision for turning off MPX was
made in fpu__init_system_ctx_switch(), which is after the
selection of the XSAVE format. This patch fixes it by getting
that decision done earlier in fpu__init_system_xstate().
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-4-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When "noxsave" is given as a command-line input, the kernel
should disable XGETBV1. This issue currently does not cause any
actual problems. XGETBV1 is only useful if we have something
using the 'init optimization' (i.e. xsaveopt, xsaves). We
already clear both of those in fpu__xstate_clear_all_cpu_caps().
But this is good for completeness.
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-3-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

These are clearly just used during init.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447424312-26400-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NIngo Molnar <mingo@kernel.org>

KVM uses the get_xsave_addr() function in a different fashion from
the native kernel, in that the 'xsave' parameter belongs to guest vcpu,
not the currently running task.

But 'xsave' is replaced with current task's (host) xsave structure, so
get_xsave_addr() will incorrectly return the bad xsave address to KVM.

Fix it so that the passed in 'xsave' address is used - as intended
originally.
Signed-off-by: NHuaitong Han <huaitong.han@intel.com>
Reviewed-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Link: http://lkml.kernel.org/r/1446800423-21622-1-git-send-email-huaitong.han@intel.com
[ Tidied up the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We now have C structures defined for each of the XSAVE state
components that we support.  This patch adds checks during our
verification pass to ensure that the CPU-provided data
enumerated in CPUID leaves matches our C structures.

If not, we warn and dump all the XSAVE CPUID leaves.

Note: this *actually* found an inconsistency with the MPX
'bndcsr' state.  The hardware pads it out differently from
our C structures.  This patch caught it and warned.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233131.A8DB36DA@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The xstate CPUID leaves enumerate where each state component is
inside the XSAVE buffer, along with the size of the entire
buffer.  Our new XSAVE sanity-checking code extrapolates an
expected _total_ buffer size by looking at the last component
that it encounters.

That method requires that the highest-numbered component also
be the one with the highest offset.  This is a pretty safe
assumption, but let's add some code to ensure it stays true.

To make this check work correctly, we also need to ensure we
only consider the offsets from enabled features because the
offset register (ebx) will return 0 on unsupported features.

This also means that we will preserve the -1's that we
initialized xstate_offsets/sizes[] with.  That will help
find bugs.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233130.0843AB15@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Note: our xsaves support is currently broken and disabled.  This
patch does not fix it, but it is an incremental improvement.

This might be useful to someone backporting the entire set of
XSAVES patches at some point, but it should not be backported
alone.

Ingo said he wanted something like this (bullets 2 and 3):

  http://lkml.kernel.org/r/20150808091508.GB32641@gmail.com

There are currently two xsave buffer formats: standard and
compacted.  The standard format is waht 'XSAVE' and 'XSAVEOPT'
produce while 'XSAVES' and 'XSAVEC' produce a compacted-formet
buffer.  (The kernel never uses XSAVEC)

But, the XSAVES buffer *ALSO* contains "system state components"
which are never saved by a plain XSAVE.  So, XSAVES has two
things that might make its buffer differently-sized from an
XSAVE-produced one.

The current code assumes that an XSAVES buffer's size is simply
the sum of the sizes of the (user) states which are supported.
This seems to work in most cases, but it is not consistent with
what the SDM says, and it breaks if we 'align' a component in
the buffer.  The calculation is also unnecessary work since the
CPU *tells* us the size of the buffer directly.

This patch just reads the size of the buffer right out of the
CPUID leaf instead of trying to derive it.

But, blindly trusting the CPU like this is dangerous.  We add
a verification pass in do_extra_xstate_size_checks() to ensure
that the size we calculate matches with what we see from the
hardware.  When it comes down to it, we trust but verify the
CPU.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233130.234FE1EC@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We currently use test_bit() in a few places to see if an
xfeature is enabled.  It ends up being a bit ugly because
'xfeatures_mask' is a u64 and test_bit wants an 'unsigned long'
so it requires a cast.  The *_bit() functions are also
techincally atomic, which we have no need for here.

So, remove the test_bit()s and replace with the new
xfeature_enabled() helper.

This also provides a central place to add a comment about the
future need to support 'system xstates'.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233129.B1534F86@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

xfeature_nr ended up being initialized too late for me to
use it in the "xsave size sanity check" patch which is
later in the series.  I tried to move around its initialization
but realized that it was just as easy to get rid of it.

We only have 9 XFEATURES.  Instead of dynamically calculating
and storing the last feature, just use the compile-time max:
XFEATURES_NR_MAX.  Note that even with 'xfeatures_nr' we can
had "holes" in the xfeatures_mask that we had to deal with.

We also change a 'leaf' variable to be a plain 'i'.  Although
it is used to grab a cpuid leaf in this one loop, all of the
other loops just use an 'i' and I find it much more obvious
to keep the naming consistent across all the similar loops.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233128.3F30DF5A@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The 'xstate.c' code has a bunch of references to '2'.  This
is because we have a lot more work to do for the "extended"
xstates than the "legacy" ones and state component 2 is the
first "extended" state.

This patch replaces all of the instances of '2' with
FIRST_EXTENDED_XFEATURE, which clearly explains what is
going on.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233128.A8C0BF51@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is a logcal followon to the last patch.  It makes the
XFEATURE_MAX naming consistent with the other enum values.
This is what Ingo suggested.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233127.A541448F@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are two concepts that have some confusing naming:
 1. Extended State Component numbers (currently called
    XFEATURE_BIT_*)
 2. Extended State Component masks (currently called XSTATE_*)

The numbers are (currently) from 0-9.  State component 3 is the
bounds registers for MPX, for instance.

But when we want to enable "state component 3", we go set a bit
in XCR0.  The bit we set is 1<<3.  We can check to see if a
state component feature is enabled by looking at its bit.

The current 'xfeature_bit's are at best xfeature bit _numbers_.
Calling them bits is at best inconsistent with ending the enum
list with 'XFEATURES_NR_MAX'.

This patch renames the enum to be 'xfeature'.  These also
happen to be what the Intel documentation calls a "state
component".

We also want to differentiate these from the "XSTATE_*" macros.
The "XSTATE_*" macros are a mask, and we rename them to match.

These macros are reasonably widely used so this patch is a
wee bit big, but this really is just a rename.

The only non-mechanical part of this is the

	s/XSTATE_EXTEND_MASK/XFEATURE_MASK_EXTEND/

We need a better name for it, but that's another patch.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233126.38653250@viggo.jf.intel.com
[ Ported to v4.3-rc1. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The original purpose of XSTATE_RESERVE was to carve out space
to store all of the possible extended state components that
get saved with the XSAVE instruction(s).

However, we are now almost entirely dynamically allocating
the buffers we use for XSAVE by placing them at the end of
the task_struct and them sizing them at boot.  The one
exception for that is the init_task.

The maximum extended state component size that we have today
is on systems with space for AVX-512 and Memory Protection
Keys: 2696 bytes.  We have reserved a PAGE_SIZE buffer in
the init_task via fpregs_state->__padding.

This check ensures that even if the component sizes or
layout were changed (which we do not expect), that we will
still not overflow the init_task's buffer.

In the case that we detect we might overflow the buffer,
we completely disable XSAVE support in the kernel and try
to boot as if we had 'legacy x87 FPU' support in place.
This is a crippled state without any of the XSAVE-enabled
features (MPX, AVX, etc...).  But, it at least let us
boot safely.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233125.D948D475@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When we want to _completely_ disable XSAVE support as far as
the kernel is concerned, we have a big set of feature flags
to clear.  We currently only do this in cases where the user
asks for it to be disabled, but we are about to expand the
places where we do it to handle errors too.

Move the code in to xstate.c, and put it in the xstate.h
header.  We will use it in the next patch too.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233124.EA9A70E5@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is utterly a personal taste thing, but I find it way easier
to read structure sizes in decimal than in hex.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233124.1A8B04A8@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

I noticed that my MPX tracepoints were producing garbage for the
lower and upper bounds:

	mpx_bounds_register_exception: address referenced: 0x00007fffffffccb7 bounds: lower: 0x0 ~upper: 0xffffffffffffffff
	mpx_bounds_register_exception: address referenced: 0x00007fffffffccbf bounds: lower: 0x0 ~upper: 0xffffffffffffffff

This is, of course, bogus because 0x00007fffffffccbf is *within*
the bounds.  I assumed that my instruction decoder was bad and
went looking at it.  But I eventually realized that I was
getting a '0' offset back from xstate_offsets[BNDREGS].

It was being skipped in the initialization, which is obviously
bogus, so remove the extra leaf++.

This also goes an initializes xstate_offsets/sizes[] to -1 so
so that bugs like this will oops instead of silently failing
in interesting ways.

This was introduced by:

	39f1acd2 ("x86/fpu/xstate: Don't assume the first zero xfeatures zero bit means the end")
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Link: http://lkml.kernel.org/r/20150611193400.2E0B00DB@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX code appears is calling a low-level FPU function
(copy_fpregs_to_fpstate()).  This function is not able to
be called in all contexts, although it is safe to call
directly in some cases.

Although probably correct, the current code is ugly and
potentially error-prone.  So, add a wrapper that calls
the (slightly) higher-level fpu__save() (which is preempt-
safe) and also ensures that we even *have* an FPU context
(in the case that this was called when in lazy FPU mode).

Ingo had this to say about the details about when we need
preemption disabled:

> it's indeed generally unsafe to access/copy FPU registers with preemption enabled,
> for two reasons:
>
>   - on older systems that use FSAVE the instruction destroys FPU register
>     contents, which has to be handled carefully
>
>   - even on newer systems if we copy to FPU registers (which this code doesn't)
>     then we don't want a context switch to occur in the middle of it, because a
>     context switch will write to the fpstate, potentially overwriting our new data
>     with old FPU state.
>
> But it's safe to access FPU registers with preemption enabled in a couple of
> special cases:
>
>   - potentially destructively saving FPU registers: the signal handling code does
>     this in copy_fpstate_to_sigframe(), because it can rely on the signal restore
>     side to restore the original FPU state.
>
>   - reading FPU registers on modern systems: we don't do this anywhere at the
>     moment, mostly to keep symmetry with older systems where FSAVE is
>     destructive.
>
>   - initializing FPU registers on modern systems: fpu__clear() does this. Here
>     it's safe because we don't copy from the fpstate.
>
>   - directly writing FPU registers from user-space memory (!). We do this in
>     fpu__restore_sig(), and it's safe because neither context switches nor
>     irq-handler FPU use can corrupt the source context of the copy (which is
>     user-space memory).
>
> Note that the MPX code's current use of copy_fpregs_to_fpstate() was safe I think,
> because:
>
>  - MPX is predicated on eagerfpu, so the destructive F[N]SAVE instruction won't be
>    used.
>
>  - the code was only reading FPU registers, and was doing it only in places that
>    guaranteed that an FPU state was already active (i.e. didn't do it in
>    kthreads)
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183700.AA881696@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

get_xsave_addr() assumes that if an xsave bit is present in the
hardware (pcntxt_mask) that it is present in a given xsave
buffer.  Due to an bug in the xsave code on all of the systems
that have MPX (and thus all the users of this code), that has
been a true assumption.

But, the bug is getting fixed, so our assumption is not going
to hold any more.

It's quite possible (and normal) for an enabled state to be
present on 'pcntxt_mask', but *not* in 'xstate_bv'.  We need
to consult 'xstate_bv'.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183700.1E739B34@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

copy_kernel_to_xregs_booting() has a second parameter that is the mask
of xfeatures that should be copied - but this parameter is always -1.

Simplify the call site of this function, this also makes it more
similar to the function call signature of other copy_kernel_to*regs()
functions.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Remove obsolete comment about __init limitations: in the new code there aren't any.

Also standardize the comment style in the function while at it.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

There are various internal FPU state debugging checks that never
trigger in practice, but which are useful for FPU code development.

Separate these out into CONFIG_X86_DEBUG_FPU=y, and also add a
couple of new ones.

The size difference is about 0.5K of code on defconfig:

   text        data     bss          filename
   15028906    2578816  1638400      vmlinux
   15029430    2578816  1638400      vmlinux

( Keep this enabled by default until the new FPU code is debugged. )

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Now that all the FPU init function call dependencies are
cleaned up we can propagate __init annotations deeper.

This shrinks the runtime size of the kernel a bit, and
also addresses a few section warnings.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So call setup_xstate_comp() from the xstate init code, not
from the generic fpu__init_system() code.

This allows us to remove the protytype from xstate.h as well.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The current xstate code in setup_xstate_features() assumes that
the first zero bit means the end of xfeatures - but that is not
so, the SDM clearly states that an arbitrary set of xfeatures
might be enabled - and it is also clear from the description
of the compaction feature that holes are possible:

  "13-6 Vol. 1MANAGING STATE USING THE XSAVE FEATURE SET
  [...]

  Compacted format. Each state component i (i ≥ 2) is located at a byte
  offset from the base address of the XSAVE area based on the XCOMP_BV
  field in the XSAVE header:

  — If XCOMP_BV[i] = 0, state component i is not in the XSAVE area.

  — If XCOMP_BV[i] = 1, the following items apply:

  • If XCOMP_BV[j] = 0 for every j, 2 ≤ j < i, state component i is
    located at a byte offset 576 from the base address of the XSAVE
    area. (This item applies if i is the first bit set in bits 62:2 of
    the XCOMP_BV; it implies that state component i is located at the
    beginning of the extended region.)

  • Otherwise, let j, 2 ≤ j < i, be the greatest value such that
    XCOMP_BV[j] = 1. Then state component i is located at a byte offset
    X from the location of state component j, where X is the number of
    bytes required for state component j as enumerated in
    CPUID.(EAX=0DH,ECX=j):EAX. (This item implies that state component i
    immediately follows the preceding state component whose bit is set
    in XCOMP_BV.)"

So don't assume that the first zero xfeatures bit means the end of
all xfeatures - iterate through all of them.

I'm not aware of hardware that triggers this currently.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Improve the memory layout of 'struct fpu':

 - change ->fpregs_active from 'int' to 'char' - it's just a single flag
   and modern x86 CPUs can do efficient byte accesses.

 - pack related fields closer to each other: often 'fpu->state' will not be
   touched, while the other fields will - so pack them into a group.

Also add comments to each field, describing their purpose, and add
some background information about lazy restores.

Also fix an obsolete, lazy switching related comment in fpu_copy()'s description.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Use these consistent names:

    struct fregs_state           # was: i387_fsave_struct
    struct fxregs_state          # was: i387_fxsave_struct
    struct swregs_state          # was: i387_soft_struct
    struct xregs_state           # was: xsave_struct
    union  fpregs_state          # was: thread_xstate

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

fpu/xstate.c has a lot of generic FPU signal frame handling routines,
move them into a separate file: fpu/signal.c.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Standardize the naming of the various functions that copy register
content in specific FPU context formats:

  copy_fxregs_to_kernel()         # was: fpu_fxsave()
  copy_xregs_to_kernel()          # was: xsave_state()

  copy_kernel_to_fregs()          # was: frstor_checking()
  copy_kernel_to_fxregs()         # was: fxrstor_checking()
  copy_kernel_to_xregs()          # was: fpu_xrstor_checking()
  copy_kernel_to_xregs_booting()  # was: xrstor_state_booting()

  copy_fregs_to_user()            # was: fsave_user()
  copy_fxregs_to_user()           # was: fxsave_user()
  copy_xregs_to_user()            # was: xsave_user()

  copy_user_to_fregs()            # was: frstor_user()
  copy_user_to_fxregs()           # was: fxrstor_user()
  copy_user_to_xregs()            # was: xrestore_user()
  copy_user_to_fpregs_zeroing()   # was: restore_user_xstate()

Eliminate fpu_xrstor_checking(), because it was just a wrapper.

No change in functionality.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So the handling of init_xstate_ctx has a layering violation: both
'struct xsave_struct' and 'union thread_xstate' have a
'struct i387_fxsave_struct' member:

   xsave_struct::i387
   thread_xstate::fxsave

The handling of init_xstate_ctx is generic, it is used on all
CPUs, with or without XSAVE instruction. So it's confusing how
the generic code passes around and handles an XSAVE specific
format.

What we really want is for init_xstate_ctx to be a proper
fpstate and we use its ::fxsave and ::xsave members, as
appropriate.

Since the xsave_struct::i387 and thread_xstate::fxsave aliases
each other this is not a functional problem.

So implement this, and move init_xstate_ctx to the generic FPU
code in the process.

Also, since init_xstate_ctx is not XSAVE specific anymore,
rename it to init_fpstate, and mark it __read_mostly,
because it's only modified once during bootup, and used
as a reference fpstate later on.

There's no change in functionality.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

fpstate_init() only uses fpu->state, so pass that in to it.

This enables the cleanup we will do in the next patch.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Remove various boot quirks that came from the old code.

The new code is cleanly split up into per-system and per-cpu
init sequences, and system init functions are only called once.

Remove the run-once quirks.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Only a few places use the regset definitions, so factor them out.

Also fix related header dependency assumptions.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Most of the FPU does not use them, so split it out and include
them in signal.c and ia32_signal.c

Also fix header file dependency assumption in fpu/core.c.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

With recent cleanups and fixes the fpu__reset() and fpu__clear()
functions have become almost identical in functionality: the only
difference is that fpu__reset() assumed that the fpstate
was already active in the eagerfpu case, while fpu__clear()
activated it if it was inactive.

This distinction almost never matters, the only case where such
fpstate activation happens if if the init thread (PID 1) gets exec()-ed
for the first time.

So keep fpu__clear() and change all fpu__reset() uses to
fpu__clear() to simpify the logic.

( In a later patch we'll further simplify fpu__clear() by making
  sure that all contexts it is called on are already active. )

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Consolidate more signal frame related functions:

   text      data    bss     dec       filename
   14108070  2575280 1634304 18317654  vmlinux.before
   14107944  2575344 1634304 18317592  vmlinux.after

Also, while moving it, rename alloc_mathframe() to fpu__alloc_mathframe().

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

restore_xstate_sig() is a misnomer: it's not limited to 'xstate' at all,
it is the high level 'restore FPU state from a signal frame' function
that works with all legacy FPU formats as well.

Rename it (and its helper) accordingly, and also move it to the
fpu__*() namespace.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

drop_fpu() and fpu_reset_state() are similar in functionality
and in scope, yet this is not apparent from their names.

drop_fpu() deactivates FPU contents (both the fpregs and the fpstate),
but leaves register contents intact in the eager-FPU case, mostly as an
optimization. It disables fpregs in the lazy FPU case. The drop_fpu()
method can be used to destroy FPU state in an optimized way, when we
know that a new state will be loaded before user-space might see
any remains of the old FPU state:

     - such as in sys_exit()'s exit_thread() where we know this task
       won't execute any user-space instructions anymore and the
       next context switch cleans up the FPU. The old FPU state
       might still be around in the eagerfpu case but won't be
       saved.

     - in __restore_xstate_sig(), where we use drop_fpu() before
       copying a new state into the fpstate and activating that one.
       No user-pace instructions can execute between those steps.

     - in sys_execve()'s fpu__clear(): there we use drop_fpu() in
       the !eagerfpu case, where it's equivalent to a full reinit.

fpu_reset_state() is a stronger version of drop_fpu(): both in
the eagerfpu and the lazy-FPU case it guarantees that fpregs
are reinitialized to init state. This method is used in cases
where we need a full reset:

     - handle_signal() uses fpu_reset_state() to reset the FPU state
       to init before executing a user-space signal handler. While we
       have already saved the original FPU state at this point, and
       always restore the original state, the signal handling code
       still has to do this reinit, because signals may interrupt
       any user-space instruction, and the FPU might be in various
       intermediate states (such as an unbalanced x87 stack) that is
       not immediately usable for general C signal handler code.

     - __restore_xstate_sig() uses fpu_reset_state() when the signal
       frame has no FP context. Since the signal handler may have
       modified the FPU state, it gets reset back to init state.

     - in another branch __restore_xstate_sig() uses fpu_reset_state()
       to handle a restoration error: when restore_user_xstate() fails
       to restore FPU state and we might have inconsistent FPU data,
       fpu_reset_state() is used to reset it back to a known good
       state.

     - __kernel_fpu_end() uses fpu_reset_state() in an error branch.
       This is in a 'must not trigger' error branch, so on bug-free
       kernels this never triggers.

     - fpu__restore() uses fpu_reset_state() in an error path
       as well: if the fpstate was set up with invalid FPU state
       (via ptrace or via a signal handler), then it's reset back
       to init state.

     - likewise, the scheduler's switch_fpu_finish() uses it in a
       restoration error path too.

Move both drop_fpu() and fpu_reset_state() to the fpu__*() namespace
and harmonize their naming with their function:

    fpu__drop()
    fpu__reset()

This clearly shows that both methods operate on the full state of the
FPU, just like fpu__restore().

Also add comments to explain what each function does.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>