- 01 10月, 2015 2 次提交
-
-
由 LABBE Corentin 提交于
The talitos driver use two dma_map_sg path according to SG are chained or not. Since dma_map_sg can handle both case, clean the code with all references to sg chained. Thus removing talitos_map_sg, talitos_unmap_sg_chain and sg_count functions. Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Some code cleanups after crypto API changes: - Change qat_algs_unregister to a void function to keep it consistent with qat_asym_algs_unregister. - Remove empty functions qat_algs_init & qat_algs_exit. Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 9月, 2015 10 次提交
-
-
由 LABBE Corentin 提交于
The sahara_sg_length function of the sahara driver is the same as sg_nents_for_len from lib/scatterlist.c Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 LABBE Corentin 提交于
The get_sg_count function of amcc is the same as sg_nents_for_len from lib/scatterlist.c Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 LABBE Corentin 提交于
The sg_count function in bfin_crc.c is the same function as sg_nents. Remove the duplicate code and use sg_nents() instead. Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Load balancing of crypto instances only used a single device. There was no problem with that on PF, but since there is only one or two instance per VF we need to loadbalance across devices. Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
Commit a1efb01f ("jump_label, locking/static_keys: Rename JUMP_LABEL_TYPE_* and related helpers to the static_key* pattern") introduced the definition of JUMP_TYPE_MASK in include/linux/jump_label.h causing the following name collision: In file included from drivers/crypto/caam/desc_constr.h:7:0, from drivers/crypto/caam/ctrl.c:15: drivers/crypto/caam/desc.h:1495:0: warning: "JUMP_TYPE_MASK" redefined #define JUMP_TYPE_MASK (0x03 << JUMP_TYPE_SHIFT) ^ In file included from include/linux/module.h:19:0, from drivers/crypto/caam/compat.h:9, from drivers/crypto/caam/ctrl.c:11: include/linux/jump_label.h:131:0: note: this is the location of the previous definition #define JUMP_TYPE_MASK 1UL As JUMP_TYPE_MASK definition in desc.h is never used, we can safely remove it to avoid the name collision. Reported-by: NOlof's autobuilder <build@lixom.net> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 John Griffin 提交于
In some cases we don't want iommu to be enabled but still we want to enable VFs. Signed-off-by: NJohn Griffin <john.griffin@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
MX6SL has the same DCP crypto block as in MX23/MX28, so allow it to be built for ARCH_MXC. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Luis de Bethencourt 提交于
These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Luis de Bethencourt 提交于
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Luis de Bethencourt 提交于
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 11 9月, 2015 1 次提交
-
-
由 Andy Shevchenko 提交于
Instead of custom approach let's use recently introduced seq_hex_dump() helper. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NTadeusz Struk <tadeusz.struk@intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 9月, 2015 2 次提交
-
-
由 LABBE Corentin 提交于
The sun4i_ss_opti_poll function cipher data until the output miter have a length of 0. If the crypto API client, give more SGs than necessary this could result in an infinite loop. Fix it by checking for remaining bytes, just like sun4i_ss_cipher_poll(). Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Michael Ellerman 提交于
This code uses FP (floating point), Altivec and VSX (Vector-Scalar Extension). It can just depend on CONFIG_VSX though, because that already depends on FP and Altivec. Otherwise we get lots of link errors such as: drivers/built-in.o: In function `.p8_aes_setkey': aes.c:(.text+0x2d325c): undefined reference to `.enable_kernel_altivec' aes.c:(.text+0x2d326c): undefined reference to `.enable_kernel_vsx' Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 25 8月, 2015 1 次提交
-
-
由 Tadeusz Struk 提交于
We need to support legacy VFs as well as VFs running on different OSes. To do so the compatibility check need needs to be relaxed. This patch moves the logic responsible for VF to PF version and compatibility checking from adfsriov.c to adf_pf2vf_msg.c, where it belongs, and changes the logic enable legacy VFs. Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 24 8月, 2015 6 次提交
-
-
由 Tadeusz Struk 提交于
Add range check for ring number. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
In build time vadduqm opcode is not being mapped correctly. Adding a new map in ppc-xlate to do this. Signed-off-by: NLeonidas S Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
"The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...); .... The preferred form for allocating a zeroed array is the following: p = kcalloc(n, sizeof(...), ...); " ,so do as suggested. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
Instead of propagating a 'fake' error code, just propagate the real one in the case of caam_drv_identify_clk() failure. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
In the error path we should disable the resources that were previously acquired, so fix the error handling accordingly. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Horia Geant? 提交于
Most significant part of JQCR (Job Queue Control Register) contains bits that control endianness: ILE - Immediate Little Endian, DWS - Double Word Swap. The bits are automatically set by the Job Queue Controller HW. Unfortunately these bits are cleared in SW when submitting descriptors via the register-based service interface. >From LS1021A: JQCR_MS = 08080100 - before writing: ILE | DWS | SRC (JR0) JQCR_MS = 30000100 - after writing: WHL | FOUR | SRC (JR0) This would cause problems on little endian caam for descriptors containing immediata data or double-word pointers. Currently there is no problem since the only descriptors ran through this interface are the ones that (un)instantiate RNG. Signed-off-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 19 8月, 2015 1 次提交
-
-
由 Vaishali Thakkar 提交于
This patch moves the data allocated using dma_alloc_coherent to the corresponding managed interface. To be compatible with the change, various gotos are replaced with direct returns and unneeded labels are dropped. Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 18 8月, 2015 4 次提交
-
-
由 Horia Geant? 提交于
LS1021A is a QorIQ SoC having little endian CAAM. There are a few differences b/w QorIQ and i.MX from CAAM perspective: 1. i.MX platforms are somewhat special wrt. 64-bit registers: -big endian format at 64-bit level: MSW at address+0 and LSW at address+4 -little endian format at 32-bit level (within MSW and LSW) and thus need special handling. 2. No CCM (clock controller module) for QorIQ. No CAAM clocks to enable / disable. A new Kconfig option - CRYPTO_DEV_FSL_CAAM_LE - is added to indicate CAAM is little endian (*). It is hidden from the user (to avoid misconfiguration); when adding support for a new platform with LE CAAM, either the Kconfig needs to be updated or the corresponding defconfig needs to indicate that CAAM is LE. (*) Using a DT property to provide CAAM endianness would not allow for the ifdeffery. In order to keep changes to a minimum, the following changes are postponed: -endianness fix of the last word in the S/G (rsvd2, bpid, offset), fields are always 0 anyway; -S/G format fix for i.MX7 (yes, i.MX7 support was not added yet, but still...) Signed-off-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Change memcpy to memmove because the copy is done within the same buffer. Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
GHASH table algorithm is using a big endian key. In little endian machines key will be LE ordered. After a lxvd2x instruction key is loaded as it is, LE/BE order, in first case it'll generate a wrong table resulting in wrong hashes from the algorithm. Bug affects only LE machines. In order to fix it we do a swap for loaded key. Cc: stable@vger.kernel.org Signed-off-by: NLeonidas S Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
AES-CTR is using a counter 8bytes-8bytes what miss match with kernel specs. In the previous code a vadduwm was done to increment counter. Replacing this for a vadduqm now considering both cases counter 8-8 bytes and full 16bytes. Cc: stable@vger.kernel.org Signed-off-by: NLeonidas S Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 17 8月, 2015 6 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NDan Williams <dan.j.williams@intel.com> [hch: split from a larger patch by Dan] Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dan.j.williams@intel.com> [hch: split from a larger patch by Dan] Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Herbert Xu 提交于
The file nx.h has function prototypes that use struct crypto_aead. However, as crypto/aead.h is not included we don't have a definition for it. This patch adds a forward declaration to fix this. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
Compare pointer-typed values to NULL rather than 0. The semantic patch that makes this change is available in scripts/coccinelle/null/badzero.cocci Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone has been converted. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
The qat driver uses crypto_aead_crt in order to get the authsize. This patch replaces it with the crypto_aead_authsize helper instead. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 13 8月, 2015 6 次提交
-
-
由 Fabio Estevam 提交于
Variable 'ret' is only used for returning the value 0. We can make it simpler and just return 0 instead. The semantic patch that makes this change is available in scripts/coccinelle/misc/returnvar.cocci. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Fabio Estevam 提交于
In the error paths we should free the resources that were previously acquired, so fix it accordingly. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Wu Fengguang 提交于
drivers/crypto/qat/qat_common/adf_sriov.c:258:1-4: WARNING: end returns can be simpified and declaration on line 212 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Chen-Yu Tsai 提交于
On sun6i and later platforms, the reset control is split out of the clock gates. Add support for an optional reset control. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Horia Geant? 提交于
When doing pointer operation for accessing the HW S/G table, a value representing number of entries (and not number of bytes) must be used. Cc: <stable@vger.kernel.org> # 3.6+ Fixes: 045e3678 ("crypto: caam - ahash hmac support") Signed-off-by: NHoria Geant? <horia.geanta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 11 8月, 2015 1 次提交
-
-
由 Tadeusz Struk 提交于
When both PF and VF drivers are build in linker complains about multiple definition of adf_isr_resource_[alloc/free] functions. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-