- 21 7月, 2007 8 次提交
-
-
由 Jean-Christophe DUBOIS 提交于
The platforms missing the "cpus" property in the "be" node are mono-Cell platforms such as CAB or Getaway. Therefore it is possible to assume that if there is no "cpus" properties under the "be" node then we can safely return the "device node" without more checking. This is a bit hacky but ... it allows it to work on these platforms. Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net> Acked-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Jean-Christophe DUBOIS 提交于
Previous patch changed based on Christian Krafft's comment. On some legacy SLOF tree the generic code is unable to ioremap some Cell BE registers. Therefore the "generic" functions are returning a NULL pointer, triggering a crash on such platforms. Let's handle this more gracefully. Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net> Acked-by: NChristian Kraff <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Jean-Christophe DUBOIS 提交于
Previous patch changed based on Christian Krafft's comment. On some legacy SLOF tree the generic code is unable to ioremap some Cell BE registers. Therefore the "generic" functions are returning a NULL pointer, triggering a crash on such platforms. Let's handle this more gracefully. Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net> Acked-by: NChristian Kraff <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Christian Krafft 提交于
This patch reorganizes the code of the driver into three files. Two cbe_cpufreq_pmi.c and cbe_cpufreq_pervasive.c care about hardware. cbe_cpufreq.c contains the logic. There is no changed behaviour, except that the PMI related function is now located in a seperate module cbe_cpufreq_pmi. This module will be required by cbe_cpufreq, if CONFIG_CBE_CPUFREQ_PMI has been set. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Christian Krafft 提交于
Minor issues have been fixed: * added a missing call to of_node_put() * signedness of a function parameter * added some line breaks * changed global pmi_frequency_limit to a per node pmi_slow_mode_limit array Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Christian Krafft 提交于
This patch fixes the initialization of the cbe_cpufreq driver. The code that initializes the PMI related functions was called per cpu: * registering cpufreq notifier block * registering a pmi handler This ends in a bug that the notifier block gets called in an endless loop. The initialization code is being put to the module init code path by this patch. This way it only gets called once. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Christian Krafft 提交于
This patch fixes the debug code that calculates the transition time when changing the slow modes on a Cell BE cpu. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
由 Christian Krafft 提交于
The pmi driver got simplified by removing support for multiple devices. As there is no more than one pmi device per maschine, there is no need to specify the device for listening and sending messages. This way the caller (cbe_cpufreq) doesn't need to scan the device tree. When registering the handler on a board without a pmi interface, pmi.c will just return -ENODEV. The patch that fixed the breakage of cell_defconfig has been broken out of the earlier version of this patch. So this is the version that applies cleanly on top of it. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
-
- 20 7月, 2007 3 次提交
-
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Christoph Hellwig 提交于
83c54070 broke spufs by incorrectly updating the code, this patch gets it to compile again. It's probably still broken due to the scheduler changes, but this at least makes sure cell kernels can still be built. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Let spu_management_ops.enumerate_spus() return the number of found SPEs and use that information to draw some little helper penguin logos. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-By: NJames Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitaly Bordug 提交于
Rolling forward PCMCIA driver, it was discovered that the indentation in existing one, as well as in BSP side are very odd. This patch is just result of Lindent run ontop of culprit files. Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 7月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 7月, 2007 10 次提交
-
-
由 Olof Johansson 提交于
Disable auto-select of CONFIG_EMBEDDED. ELECTRA_IDE selects PATA_PLATFORM which should be sufficient. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Rename the pasemi platform to "pasemi" to be in line with the platform's directory name. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add support to build the PS3 flash rom image and remove some unneeded lmb calls. The PS3's lv1 loader supports loading gzipped binary images from flash rom to addr zero. The loader enters the image at addr 0x100. In this implementation a bootwrapper overlay is use to arrange for the kernel to be loaded to addr zero and to have a suitable bootwrapper entry at 0x100. To construct the rom image, 0x100 bytes from offset 0x100 in the kernel is copied to the bootwrapper symbol __system_reset_kernel. The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is then copied to offset 0x100. At runtime the bootwrapper program copies the 0x100 bytes at __system_reset_kernel to addr 0x100. zImage.ps3 is a wrapped image that contains a flat device tree, an lv1 compatible entry point, and an optional initrd. otheros.bld is the gzip compresed rom image built from zImage.ps3. otheros.bld is suitable for programming into the PS3 boot flash memory. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Johannes Berg 提交于
Convert the semaphores in low_i2c that are used as mutexes to real mutexes. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The struct device_node currently has a _flags variable, although it's only used for one flag - OF_DYNAMIC. Generalise the flag accessors so we can use them with other flags in future. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Vitaly Bordug 提交于
Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as of_device, so only arch/powerpc stuff is capable to use it, which now implies only mpc885ads reference board. To cope with the code that should be hooked inside driver, but is really board specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds necessary function pointers that are filled in the BSP code. [akpm@linux-foundation.org: whitespace diddles] Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NOlof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Domen Puncer 提交于
sparse caught these static functions / __iomem annotations under arch/powerpc/platform/52xx/ Signed-off-by: NDomen Puncer <domen.puncer@telargo.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Li Yang 提交于
Add 831x USB platform setup code and rework 834x USB platform setup code. Move USB platform code to usb.c for different boards with CPU of the same series to share the USB initialization code. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Roy Zang 提交于
Remove redundant pci_read_irq_line() function for 85xx CDS board. This function has been realized in common ppc pci code. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Acked-by: NAndy Fleming <afleming@freescale.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 03 7月, 2007 16 次提交
-
-
由 Kumar Gala 提交于
Make the interrupt numbers match the OpenPIC spec intead of the Freescale docs which distinguish between internal and external interrupts. Now we can use the interrupt number directly to find the register offset associated with it. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Roy Zang 提交于
Begin with MPC8548 a new reset control register is added that asserts HRESET_REQ to board logic. This register is used for chip reset. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kazunori Asayama 提交于
The function backing_ops->read_mfc_tagstatus() doesn't return a correct value because the dma_tagstatus_R register isn't saved in CSA. This fixes the problem. Signed-off-by: NKazunori Asayama <asayama@sm.sony.co.jp> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kazunori Asayama 提交于
When waiting for I/O events on mfc in an SPU context by using poll/epoll syscalls, some of the events can be lost because of wrong order of poll_wait and MFC status checks in the spufs_mfc_poll function and non-atomic update of tagwait. This fixes the problem. Signed-off-by: NKazunori Asayama <asayama@sm.sony.co.jp> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Export spu statistics in sysfs. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
spu_activate can be called from multiple threads at the same time on behalf of the same spu context. We need to make sure to only add it once to avoid runqueue corruption. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Only enable the scheduler tick if we have any context waiting to be scheduled. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
We're currently too permissive with counting libassist calls - fix the check on the SPE stop-and-signal status. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Export per-context statistics in spufs. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Provide load average information for spu context. The format is identical to /proc/loadavg, which is also where a lot of code and concepts is borrowed from. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
The new tid file contains the ID of the thread currently running the context, if any. This is used so that the new spu-top and spu-ps tools can find the thread in /proc. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
Remove redundant whitespace in arch/powerpc/platforms/cell/spufs/ Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
spufs_dir_inode_operations is exactly the same as simple_dir_inode_operations. Use that instead. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
And last but not least we need to make sure the scheduler tick never preempts a nosched context. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
spu_deactivate should never be called for nosched contets. Put in a check so we can print a stacktrace and exit early in case it happes erroneously. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Add a cpus_allowed allowed filed to struct spu_context so that we always use the cpu mask of the owning thread instead of the one happening to call into the scheduler. Also use this information in grab_runnable_context to avoid spurious wakeups. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-