When suspending, __ieee80211_suspend() calls ieee80211_scan_cancel(),
which will only cancel sw scan. In order to cancel hw scan, the
low-level driver has to cancel it in the suspend() callback. however,
this is too late, as a new scan_work will be enqueued (while the driver
is going into suspend).

Add a new cancel_hw_scan() callback, asking the driver to cancel an
active hw scan, and call it in ieee80211_scan_cancel().
Signed-off-by: NEliad Peller <eliad@wizery.com>
Reviewed-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

warning message
drivers/ssb/driver_chipcommon_pmu.c: In function ssb_pmu_resources_init
drivers/ssb/driver_chipcommon_pmu.c:420:15: warning: updown_tab_size may
be used uninitilized in this function.

updown_tab_size and depend_tab_size may not be set in the bus->chip_id
switch statement, so set to 0 by default to avoid using uninitialized
stack space.
Signed-off-by: NConnor Hansen <cmdkhh@gmail.com>
Signed-off-by: NMichael Buesch <m@bues.ch>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Trigger connection monitor on resume from suspend.  Since we
have been sleeping, there is reason to suspect that we might
not still be associated.  The speed of detecting loss of
{connection,authentication} is worth the cost of the small
additional traffic at resume.
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Check EEPROM for multiple contexts support
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Make sure when we say 11n enable, we really support it.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Multiple places have similar code to construct calib header. Merge into
single inline function.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

No functional changes, just group similar defines together
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Temperature location in EEPROM is generic to all devices
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Remove both IWL_DEBUG_TXPOWER and IWL_DEBUG_NOTIF, not used.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Instead use generic IWL_DEBUG_INFO, use IWL_DEBUG_FW for uCode related stuffs.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Instead of IWL_DEBUG_POWER, IWL_DEBUG_TEMP should be used for temperature
related debug messages
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Adding dedicated debug message for coex related activities
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Replace IWL_DEBUG_AP with IWL_DEBUG_COEX for debug COEX related stuffs
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Instead of having the separated define, use the sku capabilities in EEPROM
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Add define for band capabilities in EEPROM
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

The ucode subtypes keep changing, and there's no
particular reason to be checking them (other than
a paranoid sanity check). Since the numbers are
also in conflict between different ucode images
now, simply don't check them any more and rely on
the images being built correctly.

Also, to indicate that, rename the constants and
the enum, moving it to a different file.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Move no_sleep_autoadjust module parameter into iwlagn_mod_params structure
along with all the other iwlagn module parameters
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Move led_mode module parameter into iwlagn_mod_params structure
along with all the other iwlagn module parameters
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Move bt_coex_active module parameter into iwlagn_mod_params structure
along with all the other iwlagn module parameters
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

For testmode trace function, huge amout of data need to pass to userspace.
Use the build-in nl80211 dumpt it function

Require nl80211 testmode dumpit support patch.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

For testmode trace function, allow userspace application to request the
size of trace buffer.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

In "Build regressions/improvements in v3.0-rc2", Geert Uytterhoeven
reports a number of warnings that occur for parisc builds of rtlwifi
and dependents.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In the brcm80211 driver we disable the 80211 core when the driver is
'down'. The bcma_core_disable() function exactly does the same as
our implementation so exporting this function makes sense.

Cc: linux-wireless@vger.kernel.org
Cc: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add some error handling if the allocation fails.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

1) Avoid global adapter pointer usage
   a) in sdio.c by moving some code from mwifiex_cleanup_module() to
      mwifiex_sdio_remove().
   b) in main.c by passing an extra parameter to few functions.
2) Add new variable "user_rmmod" to identify if mwifiex_sdio_remove()
   callback function is called in card removal or rmmod context. These
   code changes are adapted from Libertas driver.
3) Remove unnecessary NULL pointer check for "func" pointer in
   mwifiex_sdio_remove().
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Use less indentions and remove uneeded irq-save flags.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Messages like that

iwl4965 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries
iwl4965 0000:03:00.0: EVT_LOGT:1821445332:0x00000000:1352
iwl4965 0000:03:00.0: EVT_LOGT:1821445332:0x00000001:1353
iwl4965 0000:03:00.0: EVT_LOGT:1821445336:0x0000000c:0357
iwl4965 0000:03:00.0: EVT_LOGT:1821445533:0x00000107:0106
iwl4965 0000:03:00.0: EVT_LOGT:1821445534:0x00000000:0302
iwl4965 0000:03:00.0: EVT_LOGT:1821445574:0x000000d4:0321
iwl4965 0000:03:00.0: EVT_LOGT:1821445575:0x00000000:1350
iwl4965 0000:03:00.0: EVT_LOGT:1821445576:0x00000000:1351
iwl4965 0000:03:00.0: EVT_LOGT:1821445576:0x00000000:1352
iwl4965 0000:03:00.0: EVT_LOGT:1821445577:0x00000001:1353
iwl4965 0000:03:00.0: EVT_LOGT:1821445581:0x0000000d:0357
iwl4965 0000:03:00.0: EVT_LOGT:1821446327:0x00000107:0106
iwl4965 0000:03:00.0: EVT_LOGT:1821446328:0x00000000:0302
iwl4965 0000:03:00.0: EVT_LOGT:1821446368:0x000000d4:0321
iwl4965 0000:03:00.0: EVT_LOGT:1821446369:0x00000000:1350
iwl4965 0000:03:00.0: EVT_LOGT:1821446370:0x00000000:1351
iwl4965 0000:03:00.0: EVT_LOGT:1821446370:0x00000000:1352
iwl4965 0000:03:00.0: EVT_LOGT:1821446371:0x00000001:1353
iwl4965 0000:03:00.0: EVT_LOGT:1821446375:0x0000000e:0357
iwl4965 0000:03:00.0: EVT_LOGT:1821446383:0x00000000:0125

are completely useless for me. Remove bunch of code that generate them.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We do not reset radio anymore, hence don't need that code too.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Recover from statistics code was added during 6xxx devices development,
I don't think is needed on old devices. Also it is suspicious to cause
random, unreproducible microcode errors and hangs. So remove it.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

At http://dev.laptop.org/ticket/10748 we are seeing a case of the
libertas firmware randomly stopping responding to commands after
resume. Careful monitoring of communications indicates a firmware or
hardware bug, which has been reported to Marvell.

Work around this issue by adding a reset_card method; this is
automatically called when command timeouts are detected and provides an
instant recovery to this situation.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Function ieee80211_reconfig in net/mac80211/util.c contains label wake_up
which is defined unconditionally, but only used with CONFIG_PM. Gcc
warns about this when CONFIG_PM is not defined.

This patch makes the label's definition dependent on CONFIG_PM too,
eliminating the warning.

The issue was apparently introduced in git commit
eecc4800.
Signed-off-by: NVincent Zweije <vincent@zweije.nl>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Downsteram DEAUTH messages do not refer to a current authentication
attempt -- AUTH responses do.  Therefore we should not allow DEAUTH
from an AP to void state for an AUTH attempt in progress.
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Once we realize a bad packet was received, don't
waste time unmapping it, freeing it, then allocation
a new skb and mapping it, just resubmit the existing
skb.
Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add ieee80211_get_operstate() function to get the operstate
of the netdevice.

This is needed for drivers that need to know when the interface
is IF_OPER_UP (e.g. wl12xx), and block notifiers can't be used
(e.g. because the interface is already IF_OPER_UP, like after
resuming from suspend)
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
	drivers/net/wireless/rtlwifi/pci.c