Impact: fix hang/crash on ia64 under high load

This is ugly, but the simplest patch by far.

Unlike other similar routines, account_group_exec_runtime() could be
called "implicitly" from within scheduler after exit_notify(). This
means we can race with the parent doing release_task(), we can't just
check ->signal != NULL.

Change __exit_signal() to do spin_unlock_wait(&task_rq(tsk)->lock)
before __cleanup_signal() to make sure ->signal can't be freed under
task_rq(tsk)->lock. Note that task_rq_unlock_wait() doesn't care
about the case when tsk changes cpu/rq under us, this should be OK.

Thanks to Ingo who nacked my previous buggy patch.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NDoug Chapman <doug.chapman@hp.com>

__scm_destroy() walks the list of file descriptors in the scm_fp_list
pointed to by the scm_cookie argument.

Those, in turn, can close sockets and invoke __scm_destroy() again.

There is nothing which limits how deeply this can occur.

The idea for how to fix this is from Linus.  Basically, we do all of
the fput()s at the top level by collecting all of the scm_fp_list
objects hit by an fput().  Inside of the initial __scm_destroy() we
keep running the list until it is empty.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__scm_destroy() walks the list of file descriptors in the scm_fp_list
pointed to by the scm_cookie argument.

Those, in turn, can close sockets and invoke __scm_destroy() again.

There is nothing which limits how deeply this can occur.

The idea for how to fix this is from Linus.  Basically, we do all of
the fput()s at the top level by collecting all of the scm_fp_list
objects hit by an fput().  Inside of the initial __scm_destroy() we
keep running the list until it is empty.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>

a patch from Henrik Austad did this:

>> Do not declare select_task_rq as part of sched_class when CONFIG_SMP is
>> not set.

Peter observed:

> While a proper cleanup, could you do it by re-arranging the methods so
> as to not create an additional ifdef?

Do not declare select_task_rq and some other methods as part of sched_class
when CONFIG_SMP is not set.

Also gather those methods to avoid CONFIG_SMP mess.
Idea-by: NHenrik Austad <henrik.austad@gmail.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NHenrik Austad <henrik@austad.us>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This adds a kconfig option to change the /proc/PID/coredump_filter default.
Fedora has been carrying a trivial patch to change the hard-wired value for
this default, since Fedora 8.  The default default can't change safely
because there are old GDB versions out there (all before 6.7) that are
confused by the core dump files created by the MMF_DUMP_ELF_HEADERS setting.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presently hugepage's vma has a VM_RESERVED flag in order not to be
swapped.  But a VM_RESERVED vma isn't core dumped because this flag is
often used for some kernel vmas (e.g.  vmalloc, sound related).

Thus hugepages are never dumped and it can't be debugged easily.  Many
developers want hugepages to be included into core-dump.

However, We can't read generic VM_RESERVED area because this area is often
IO mapping area.  then these area reading may change device state.  it is
definitly undesiable side-effect.

So adding a hugepage specific bit to the coredump filter is better.  It
will be able to hugepage core dumping and doesn't cause any side-effect to
any i/o devices.

In additional, libhugetlb use hugetlb private mapping pages as anonymous
page.  Then, hugepage private mapping pages should be core dumped by
default.

Then, /proc/[pid]/core_dump_filter has two new bits.

 - bit 5 mean hugetlb private mapping pages are dumped or not. (default: yes)
 - bit 6 mean hugetlb shared mapping pages are dumped or not.  (default: no)

I tested by following method.

% ulimit -c unlimited
% ./crash_hugepage  50
% ./crash_hugepage  50  -p
% ls -lh
% gdb ./crash_hugepage core
%
% echo 0x43 > /proc/self/coredump_filter
% ./crash_hugepage  50
% ./crash_hugepage  50  -p
% ls -lh
% gdb ./crash_hugepage core

#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <string.h>

#include "hugetlbfs.h"

int main(int argc, char** argv){
	char* p;
	int ch;
	int mmap_flags = MAP_SHARED;
	int fd;
	int nr_pages;

	while((ch = getopt(argc, argv, "p")) != -1) {
		switch (ch) {
		case 'p':
			mmap_flags &= ~MAP_SHARED;
			mmap_flags |= MAP_PRIVATE;
			break;
		default:
			/* nothing*/
			break;
		}
	}
	argc -= optind;
	argv += optind;

	if (argc == 0){
		printf("need # of pages\n");
		exit(1);
	}

	nr_pages = atoi(argv[0]);
	if (nr_pages < 2) {
		printf("nr_pages must >2\n");
		exit(1);
	}

	fd = hugetlbfs_unlinked_fd();
	p = mmap(NULL, nr_pages * gethugepagesize(),
		 PROT_READ|PROT_WRITE, mmap_flags, fd, 0);

	sleep(2);

	*(p + gethugepagesize()) = 1; /* COW */
	sleep(2);

	/* crash! */
	*(int*)0 = 1;

	return 0;
}
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: William Irwin <wli@holomorphy.com>
Cc: Adam Litke <agl@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I noticed that tg_shares_up() unconditionally takes rq-locks for all cpus
in the sched_domain. This hurts.

We need the rq-locks whenever we change the weight of the per-cpu group sched
entities. To allevate this a little, only change the weight when the new
weight is at least shares_thresh away from the old value.

This avoids the rq-lock for the top level entries, since those will never
be re-weighted, and fuzzes the lower level entries a little to gain performance
in semi-stable situations.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I noticed this while making investigations into the tbench
regressions.  Please apply.

sched: Remove hrtick_resched() extern decl.

This function was removed by 31656519
("sched, x86: clean up hrtick implementation").
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add /proc/sys/kernel/sched_domain/cpu0/domain0/name, to make
it easier to see which specific scheduler domain remained at
that entry.

Since we process the scheduler domain tree and
simplify it, it's not always immediately clear during debugging
which domain came from where.

depends on CONFIG_SCHED_DEBUG=y.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- fix UP lockup
- another set of UP/SMP cleanups and simplifications
Signed-off-by: NFrank Mayhar <fmayhar@google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is the second resubmission of the posix timer rework patch, posted
a few days ago.

This includes the changes from the previous resubmittion, which addressed
Oleg Nesterov's comments, removing the RCU stuff from the patch and
un-inlining the thread_group_cputime() function for SMP.

In addition, per Ingo Molnar it simplifies the UP code, consolidating much
of it with the SMP version and depending on lower-level SMP/UP handling to
take care of the differences.

It also cleans up some UP compile errors, moves the scheduler stats-related
macros into kernel/sched_stats.h, cleans up a merge error in
kernel/fork.c and has a few other minor fixes and cleanups as suggested
by Oleg and Ingo. Thanks for the review, guys.
Signed-off-by: NFrank Mayhar <fmayhar@google.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Lin Ming reported a 10% OLTP regression against 2.6.27-rc4.

The difference seems to come from different preemption agressiveness,
which affects the cache footprint of the workload and its effective
cache trashing.

Aggresively preempt a task if its avg overlap is very small, this should
avoid the task going to sleep and find it still running when we schedule
back to it - saving a wakeup.
Reported-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix the UP build:

In file included from arch/x86/kernel/asm-offsets_32.c:9,
                 from arch/x86/kernel/asm-offsets.c:3:
include/linux/sched.h: In function ‘thread_group_cputime_clone_thread’:
include/linux/sched.h:2272: warning: no return statement in function returning non-void
include/linux/sched.h: In function ‘thread_group_cputime_account_user’:
include/linux/sched.h:2284: error: invalid type argument of ‘->’ (have ‘struct task_cputime’)
include/linux/sched.h:2284: error: invalid type argument of ‘->’ (have ‘struct task_cputime’)
include/linux/sched.h: In function ‘thread_group_cputime_account_system’:
include/linux/sched.h:2291: error: invalid type argument of ‘->’ (have ‘struct task_cputime’)
include/linux/sched.h:2291: error: invalid type argument of ‘->’ (have ‘struct task_cputime’)
include/linux/sched.h: In function ‘thread_group_cputime_account_exec_runtime’:
include/linux/sched.h:2298: error: invalid type argument of ‘->’ (have ‘struct task_cputime’)
distcc[14501] ERROR: compile arch/x86/kernel/asm-offsets.c on a/30 failed
make[1]: *** [arch/x86/kernel/asm-offsets.s] Error 1
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Overview

This patch reworks the handling of POSIX CPU timers, including the
ITIMER_PROF, ITIMER_VIRT timers and rlimit handling.  It was put together
with the help of Roland McGrath, the owner and original writer of this code.

The problem we ran into, and the reason for this rework, has to do with using
a profiling timer in a process with a large number of threads.  It appears
that the performance of the old implementation of run_posix_cpu_timers() was
at least O(n*3) (where "n" is the number of threads in a process) or worse.
Everything is fine with an increasing number of threads until the time taken
for that routine to run becomes the same as or greater than the tick time, at
which point things degrade rather quickly.

This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF."

Code Changes

This rework corrects the implementation of run_posix_cpu_timers() to make it
run in constant time for a particular machine.  (Performance may vary between
one machine and another depending upon whether the kernel is built as single-
or multiprocessor and, in the latter case, depending upon the number of
running processors.)  To do this, at each tick we now update fields in
signal_struct as well as task_struct.  The run_posix_cpu_timers() function
uses those fields to make its decisions.

We define a new structure, "task_cputime," to contain user, system and
scheduler times and use these in appropriate places:

struct task_cputime {
	cputime_t utime;
	cputime_t stime;
	unsigned long long sum_exec_runtime;
};

This is included in the structure "thread_group_cputime," which is a new
substructure of signal_struct and which varies for uniprocessor versus
multiprocessor kernels.  For uniprocessor kernels, it uses "task_cputime" as
a simple substructure, while for multiprocessor kernels it is a pointer:

struct thread_group_cputime {
	struct task_cputime totals;
};

struct thread_group_cputime {
	struct task_cputime *totals;
};

We also add a new task_cputime substructure directly to signal_struct, to
cache the earliest expiration of process-wide timers, and task_cputime also
replaces the it_*_expires fields of task_struct (used for earliest expiration
of thread timers).  The "thread_group_cputime" structure contains process-wide
timers that are updated via account_user_time() and friends.  In the non-SMP
case the structure is a simple aggregator; unfortunately in the SMP case that
simplicity was not achievable due to cache-line contention between CPUs (in
one measured case performance was actually _worse_ on a 16-cpu system than
the same test on a 4-cpu system, due to this contention).  For SMP, the
thread_group_cputime counters are maintained as a per-cpu structure allocated
using alloc_percpu().  The timer functions update only the timer field in
the structure corresponding to the running CPU, obtained using per_cpu_ptr().

We define a set of inline functions in sched.h that we use to maintain the
thread_group_cputime structure and hide the differences between UP and SMP
implementations from the rest of the kernel.  The thread_group_cputime_init()
function initializes the thread_group_cputime structure for the given task.
The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the
out-of-line function thread_group_cputime_alloc_smp() to allocate and fill
in the per-cpu structures and fields.  The thread_group_cputime_free()
function, also a no-op for UP, in SMP frees the per-cpu structures.  The
thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls
thread_group_cputime_alloc() if the per-cpu structures haven't yet been
allocated.  The thread_group_cputime() function fills the task_cputime
structure it is passed with the contents of the thread_group_cputime fields;
in UP it's that simple but in SMP it must also safely check that tsk->signal
is non-NULL (if it is it just uses the appropriate fields of task_struct) and,
if so, sums the per-cpu values for each online CPU.  Finally, the three
functions account_group_user_time(), account_group_system_time() and
account_group_exec_runtime() are used by timer functions to update the
respective fields of the thread_group_cputime structure.

Non-SMP operation is trivial and will not be mentioned further.

The per-cpu structure is always allocated when a task creates its first new
thread, via a call to thread_group_cputime_clone_thread() from copy_signal().
It is freed at process exit via a call to thread_group_cputime_free() from
cleanup_signal().

All functions that formerly summed utime/stime/sum_sched_runtime values from
from all threads in the thread group now use thread_group_cputime() to
snapshot the values in the thread_group_cputime structure or the values in
the task structure itself if the per-cpu structure hasn't been allocated.

Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit.
The run_posix_cpu_timers() function has been split into a fast path and a
slow path; the former safely checks whether there are any expired thread
timers and, if not, just returns, while the slow path does the heavy lifting.
With the dedicated thread group fields, timers are no longer "rebalanced" and
the process_timer_rebalance() function and related code has gone away.  All
summing loops are gone and all code that used them now uses the
thread_group_cputime() inline.  When process-wide timers are set, the new
task_cputime structure in signal_struct is used to cache the earliest
expiration; this is checked in the fast path.

Performance

The fix appears not to add significant overhead to existing operations.  It
generally performs the same as the current code except in two cases, one in
which it performs slightly worse (Case 5 below) and one in which it performs
very significantly better (Case 2 below).  Overall it's a wash except in those
two cases.

I've since done somewhat more involved testing on a dual-core Opteron system.

Case 1: With no itimer running, for a test with 100,000 threads, the fixed
	kernel took 1428.5 seconds, 513 seconds more than the unfixed system,
	all of which was spent in the system.  There were twice as many
	voluntary context switches with the fix as without it.

Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
	an unmodified kernel can handle), the fixed kernel ran the test in
	eight percent of the time (5.8 seconds as opposed to 70 seconds) and
	had better tick accuracy (.012 seconds per tick as opposed to .023
	seconds per tick).

Case 3: A 4000-thread test with an initial timer tick of .01 second and an
	interval of 10,000 seconds (i.e. a timer that ticks only once) had
	very nearly the same performance in both cases:  6.3 seconds elapsed
	for the fixed kernel versus 5.5 seconds for the unfixed kernel.

With fewer threads (eight in these tests), the Case 1 test ran in essentially
the same time on both the modified and unmodified kernels (5.2 seconds versus
5.8 seconds).  The Case 2 test ran in about the same time as well, 5.9 seconds
versus 5.4 seconds but again with much better tick accuracy, .013 seconds per
tick versus .025 seconds per tick for the unmodified kernel.

Since the fix affected the rlimit code, I also tested soft and hard CPU limits.

Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
	running), the modified kernel was very slightly favored in that while
	it killed the process in 19.997 seconds of CPU time (5.002 seconds of
	wall time), only .003 seconds of that was system time, the rest was
	user time.  The unmodified kernel killed the process in 20.001 seconds
	of CPU (5.014 seconds of wall time) of which .016 seconds was system
	time.  Really, though, the results were too close to call.  The results
	were essentially the same with no itimer running.

Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
	(where the hard limit would never be reached) and an itimer running,
	the modified kernel exhibited worse tick accuracy than the unmodified
	kernel: .050 seconds/tick versus .028 seconds/tick.  Otherwise,
	performance was almost indistinguishable.  With no itimer running this
	test exhibited virtually identical behavior and times in both cases.

In times past I did some limited performance testing.  those results are below.

On a four-cpu Opteron system without this fix, a sixteen-thread test executed
in 3569.991 seconds, of which user was 3568.435s and system was 1.556s.  On
the same system with the fix, user and elapsed time were about the same, but
system time dropped to 0.007 seconds.  Performance with eight, four and one
thread were comparable.  Interestingly, the timer ticks with the fix seemed
more accurate:  The sixteen-thread test with the fix received 149543 ticks
for 0.024 seconds per tick, while the same test without the fix received 58720
for 0.061 seconds per tick.  Both cases were configured for an interval of
0.01 seconds.  Again, the other tests were comparable.  Each thread in this
test computed the primes up to 25,000,000.

I also did a test with a large number of threads, 100,000 threads, which is
impossible without the fix.  In this case each thread computed the primes only
up to 10,000 (to make the runtime manageable).  System time dominated, at
1546.968 seconds out of a total 2176.906 seconds (giving a user time of
629.938s).  It received 147651 ticks for 0.015 seconds per tick, still quite
accurate.  There is obviously no comparable test without the fix.
Signed-off-by: NFrank Mayhar <fmayhar@google.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Define USE_SPLIT_PTLOCKS as a constant expression rather than repeating
"NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS" all over the place.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We want to be able to control the default "rounding" that is used by
select() and poll() and friends. This is a per process property
(so that we can have a "nice" like program to start certain programs with
a looser or stricter rounding) that can be set/get via a prctl().

For this purpose, a field called "timer_slack_ns" is added to the task
struct. In addition, a field called "default_timer_slack"ns" is added
so that tasks easily can temporarily to a more/less accurate slack and then
back to the default.

The default value of the slack is set to 50 usec; this is significantly less
than 2.6.27's average select() and poll() timing error but still allows
the kernel to group timers somewhat to preserve power behavior. Applications
and admins can override this via the prctl()
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>

Spencer reported a problem where utime and stime were going negative despite
the fixes in commit b27f03d4. The suspected
reason for the problem is that signal_struct maintains it's own utime and
stime (of exited tasks), these are not updated using the new task_utime()
routine, hence sig->utime can go backwards and cause the same problem
to occur (sig->utime, adds tsk->utime and not task_utime()). This patch
fixes the problem

TODO: using max(task->prev_utime, derived utime) works for now, but a more
generic solution is to implement cputime_max() and use the cputime_gt()
function for comparison.

Reported-by: spencer@bluehost.com
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove 8 bytes of padding on 64 bit builds
(also removes 8 bytes from task_struct)
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

reorder structure to remove 8 bytes of padding on 64 bit builds
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The patches that are intended to introduce copy-on-write credentials for 2.6.28
require abstraction of access to some fields of the task structure,
particularly for the case of one task accessing another's credentials where RCU
will have to be observed.

Introduced here are trivial no-op versions of the desired accessors for current
and other tasks so that other subsystems can start to be converted over more
easily.

Wrappers are introduced into a new header (linux/cred.h) for UID/GID,
EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed
user_struct.  These wrappers are macros because the ordering between header
files mitigates against making them inline functions.

linux/cred.h is #included from linux/sched.h.

Further, XFS is modified such that it no longer defines and uses parameterised
versions of current_fs[ug]id(), thus getting rid of the namespace collision
otherwise incurred.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Some arch's can't handle sched_clock() being called too early - delay
this until sched_clock_init() has been called.
Reported-by: NBill Gatliff <bgat@billgatliff.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NNishanth Aravamudan <nacc@us.ibm.com>
CC: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Found an interactivity problem on a quad core test-system - simple
CPU loops would occasionally delay the system un an unacceptable way.

After much debugging with Peter Zijlstra it turned out that the problem
is caused by the string of sched_clock() changes - they caused the CPU
clock to jump backwards a bit - which confuses the scheduler arithmetics.

(which is unsigned for performance reasons)

So revert:

 # c300ba25: sched_clock: and multiplier for TSC to gtod drift
 # c0c87734: sched_clock: only update deltas with local reads.
 # af52a90a: sched_clock: stop maximum check on NO HZ
 # f7cce27f: sched_clock: widen the max and min time

This solves the interactivity problems.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMike Galbraith <efault@gmx.de>

Simplify the code of include/linux/task_io_accounting.h.

It is also more reasonable to have all the task i/o-related statistics in a
single struct (task_io_accounting).
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Put all i/o statistics in struct proc_io_accounting and use inline functions to
initialize and increment statistics, removing a lot of single variable
assignments.

This also reduces the kernel size as following (with CONFIG_TASK_XACCT=y and
CONFIG_TASK_IO_ACCOUNTING=y).

    text    data     bss     dec     hex filename
   11651       0       0   11651    2d83 kernel/exit.o.before
   11619       0       0   11619    2d63 kernel/exit.o.after
   10886     132     136   11154    2b92 kernel/fork.o.before
   10758     132     136   11026    2b12 kernel/fork.o.after

 3082029  807968 4818600 8708597  84e1f5 vmlinux.o.before
 3081869  807968 4818600 8708437  84e155 vmlinux.o.after
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Acked-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This extends wait_task_inactive() with a new argument so it can be used in
a "soft" mode where it will check for the task changing state unexpectedly
and back off.  There is no change to existing callers.  This lays the
groundwork to allow robust, noninvasive tracing that can try to sample a
blocked thread but back off safely if it wakes up.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This moves the ptrace logic in task death (exit_notify) into tracehook.h
inlines.  Some code is rearranged slightly to make things nicer.  There is
no change, only cleanup.

There is one hook called with the tasklist_lock write-locked, as ptrace
needs.  There is also a new hook called after exit_state changes and
without locks.  This is a better place for tracing work to be in the
future, since it doesn't delay the whole system with locking.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A previous patch added the early_initcall(), to allow a cleaner hooking of
pre-SMP initcalls.  Now we remove the older interface, converting all
existing users to the new one.

[akpm@linux-foundation.org: cleanups]
[akpm@linux-foundation.org: build fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix this, on avr32:

  include/linux/utsname.h:35,
                   from init/main.c:20:
  include/linux/sched.h: In function 'arch_pick_mmap_layout':
  include/linux/sched.h:2149: error: implicit declaration of function 'PAGE_ALIGN'
Reported-by: NAdrian Bunk <bunk@kernel.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes, application responses become bad under heavy memory load.
Applications take a bit time to reclaim memory.  The statistics, how long
memory reclaim takes, will be useful to measure memory usage.

This patch adds accounting memory reclaim to per-task-delay-accounting for
accounting the time of do_try_to_free_pages().

<i.e>

- When System is under low memory load,
  memory reclaim may not occur.

$ free
             total       used       free     shared    buffers     cached
Mem:       8197800    1577300    6620500          0       4808    1516724
-/+ buffers/cache:      55768    8142032
Swap:     16386292          0   16386292

$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0      0 5069748  10612 3014060    0    0     0     0    3   26  0  0 100  0
 0  0      0 5069748  10612 3014060    0    0     0     0    4   22  0  0 100  0
 0  0      0 5069748  10612 3014060    0    0     0     0    3   18  0  0 100  0

Measure the time of tar command.

$ ls -s test.dat
1501472 test.dat

$ time tar cvf test.tar test.dat
real    0m13.388s
user    0m0.116s
sys     0m5.304s

$ ./delayget -d -p <pid>
CPU             count     real total  virtual total    delay total
                  428     5528345500     5477116080       62749891
IO              count    delay total
                  338     8078977189
SWAP            count    delay total
                    0              0
RECLAIM         count    delay total
                    0              0

- When system is under heavy memory load
  memory reclaim may occur.

$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0 7159032  49724   1812   3012    0    0     0     0    3   24  0  0 100  0
 0  0 7159032  49724   1812   3012    0    0     0     0    4   24  0  0 100  0
 0  0 7159032  49848   1812   3012    0    0     0     0    3   22  0  0 100  0

In this case, one process uses more 8G memory
by execution of malloc() and memset().

$ time tar cvf test.tar test.dat
real    1m38.563s        <-  increased by 85 sec
user    0m0.140s
sys     0m7.060s

$ ./delayget -d -p <pid>
CPU             count     real total  virtual total    delay total
                 9021     7140446250     7315277975      923201824
IO              count    delay total
                 8965    90466349669
SWAP            count    delay total
                    3       21036367
RECLAIM         count    delay total
                  740    61011951153

In the later case, the value of RECLAIM is increasing.
So, taskstats can show how much memory reclaim influences TAT.
Signed-off-by: NKeika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Report per-thread I/O statistics in /proc/pid/task/tid/io and aggregate
parent I/O statistics in /proc/pid/io.  This approach follows the same
model used to account per-process and per-thread CPU times.

As a practial application, this allows for example to quickly find the top
I/O consumer when a process spawns many child threads that perform the
actual I/O work, because the aggregated I/O statistics can always be found
in /proc/pid/io.

[ Oleg Nesterov points out that we should check that the task is still
  alive before we iterate over the threads, but also says that we can do
  that fixup on top of this later.  - Linus ]
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Cc: Matt Heaton <matt@hostmonster.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Acked-by-with-comments: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adapt acct_update_integrals() to include user time when calculating the time
difference.  The units of acct_rss_mem1 and acct_vm_mem1 are also changed from
pages-jiffies to pages-usecs to avoid calling jiffies_to_usecs() in
xacct_add_tsk() which might overflow.
Signed-off-by: NJonathan Lim <jlim@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It seems to me that it was a mistake marking this function as deprecated
and scheduling it for removal, rather than resolutely removing it after
the last caller's death.

Anyway - better late, then never.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This one had the only users so far - the kill_proc, which is removed, so
drop this (invalid in namespaced world) call too.

And of course - erase all references on it from comments.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function operated on a pid_t to kill a task, which is no longer valid
in a containerized system.

It has finally lost all its users and we can safely remove it from the
tree.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kill PF_BORROWED_MM.  Change use_mm/unuse_mm to not play with ->flags, and
do s/PF_BORROWED_MM/PF_KTHREAD/ for a couple of other users.

No functional changes yet.  But this allows us to do further
fixes/cleanups.

oom_kill/ptrace/etc often check "p->mm != NULL" to filter out the
kthreads, this is wrong because of use_mm().  The problem with
PF_BORROWED_MM is that we need task_lock() to avoid races.  With this
patch we can check PF_KTHREAD directly, or use a simple lockless helper:

	/* The result must not be dereferenced !!! */
	struct mm_struct *__get_task_mm(struct task_struct *tsk)
	{
		if (tsk->flags & PF_KTHREAD)
			return NULL;
		return tsk->mm;
	}

Note also ecard_task().  It runs with ->mm != NULL, but it's the kernel
thread without PF_BORROWED_MM.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce the new PF_KTHREAD flag to mark the kernel threads.  It is set
by INIT_TASK() and copied to the forked childs (we could set it in
kthreadd() along with PF_NOFREEZE instead).

daemonize() was changed as well.  In that case testing of PF_KTHREAD is
racy, but daemonize() is hopeless anyway.

This flag is cleared in do_execve(), before search_binary_handler().
Probably not the best place, we can do this in exec_mmap() or in
start_thread(), or clear it along with PF_FORKNOEXEC.  But I think this
doesn't matter in practice, and if do_execve() fails kthread should die
soon.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ptrace_stop() has some complicated checks to prevent the scheduling in the
TASK_TRACED state with the pending SIGKILL, but these checks are racy, and
they depend on arch_ptrace_stop_needed().

This patch assumes that the traced task should die asap if it was killed by
SIGKILL, in that case schedule()->signal_pending_state() has no reason to
ignore the TASK_WAKEKILL part of TASK_TRACED, and we can kill this nasty
special case.

Note: do_exit()->ptrace_notify() is special, the killed task can already
dequeue SIGKILL at this point. Another indication that fatal_signal_pending()
is not exactly right.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lib/debugobjects.c has a function to test if an object is on the stack.
The block layer and ide needs it (they need to avoid DMA from/to stack
buffers).  This patch moves the function to include/linux/sched.h so that
everyone can use it.

lib/debugobjects.c uses current->stack but this patch uses a
task_stack_page() accessor, which is a preferable way to access the stack.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>