Signed-off-by: NPavel Osnova <pvosnova@gmail.com>
Signed-off-by: NRamiro Morales <ramiro@rmorales.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A Hauppauge HVR 4000 is used on a School On Internet Asia (SOI Asia)
project in order to carry IP traffic over ULE. However, there is an
issue with high latency jitter.

My boss, Husni, identified the problem and provided a patch for it.

The default buffer size of 32 TS frames on cx88 causes the high latency,
so our deployment changes that to 6 TS frames. This patch made the
buffer size tunable, while keeping the default buffer size of 32 TS
frames unchanged.
Signed-off-by: NAchmad Husni Thamrin <husni@ai3.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original code compared "saddr_len" with zero twice in a nonsensical
way.  I asked the list, and Andy Walls and Sri Deevi say that the second
check should be if "saddr_len == 1".
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NSrinivasa Deevi <Srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

VIDIOC_QUERYSTD and VIDIOC_G_STD ioctls are currently not
supported in the FSL VIU driver. The decoder subdevice
driver saa7115 extended by previous patch supports QUERYSTD
for saa711x, so we add the appropriate ioctls to the VIU
driver to be able to determine the video input's standard.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Autodetect input's standard using field frequency detection
feature (FIDT in status byte at 0x1F) of the chips saa7111/
saa7111a/saa7113/saa7114/saa7118.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hi

This patch didn't kill Stefan's remotes and just for upload my good part of code.
1. Add some code for show IR activity
2. Add filter for IR remotes
3. Split remotes to different types.
4. Fix stop interrupt pipe when isoc pipe started.

When we decide general way of IR I'll add support our remotes.
For our customers I'll made custom temporary patch without this part.
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add 0x15 prefix to scancodes for TT-1500 remote control.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These devices do not return the full command+address, so set
scanmask accordingly.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dabusb driver were conceived as an experimental driver for a test
device. The driver never supported any shipped product, and, while
there were some updates on it in 2003, for an ancient product,
those changes were never submitted upstream.

Also, there's no DocBook for its API, nor any upstream discussion.

So, better to remove it, on .39. If later needed, we may rescue it
from git logs. For now, let's move it to staging.
Acked-by: NDeti Fliegl <deti@fliegl.de>
Cc: Deti Fliegl <deti@fliegl.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/rc/streamzap.c: In function ‘streamzap_probe’:
drivers/media/rc/streamzap.c:460:2: warning: statement with no effect

Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/frontends/af9013.c: In function ‘af9013_update_signal_strength.clone.0’:
drivers/media/dvb/frontends/af9013.c:967:6: warning: ‘ret’ may be used uninitialized in this function

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A few typos at the driver are causing the following warnings:

drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_start_search’:
drivers/media/dvb/frontends/stv090x.c:1486:27: warning: comparison between ‘enum stv090x_search’ and ‘enum stv090x_delsys’
drivers/media/dvb/frontends/stv090x.c:1487:24: warning: comparison between ‘enum stv090x_search’ and ‘enum stv090x_delsys’
drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_optimize_track’:
drivers/media/dvb/frontends/stv090x.c:2943:2: warning: case value ‘4’ not in enumerated type ‘enum stv090x_delsys’

The first two are due to the lack of using the delsys types
	STV090x_DVBS1/STV090x_DSS
instead of
	STV090x_SEARCH_DVBS1/STV090x_SEARCH_DSS

The second one is due to the usage of STV090x_UNKNOWN (enum stv090x_modulation)
instead of STV090x_ERROR (enum stv090x_delsys).

Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The check for status errors is now before the check for len. That's
ok. However, the error printk's for the status error prints the URB
length. This generates this error:

drivers/media/video/gspca/gspca.c: In function ‘fill_frame’:
drivers/media/video/gspca/gspca.c:305:9: warning: ‘len’ may be used uninitialized in this function

The fix is as simple as moving the len init to happen before the checks.

Cc: Jean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixes several warnings:

drivers/media/dvb/frontends/dib7000m.c: In function ‘dib7000m_set_channel’:
drivers/media/dvb/frontends/dib7000m.c:808:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c:869:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c: In function ‘dib7000m_tune’:
drivers/media/dvb/frontends/dib7000m.c:1023:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c:1033:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c:1043:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c: In function ‘dib7000p_set_channel’:
drivers/media/dvb/frontends/dib7000p.c:720:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c:773:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c: In function ‘dib7000p_tune’:
drivers/media/dvb/frontends/dib7000p.c:997:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c:1007:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c:1017:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’

The drivers were prepared to support 4K carriers, but as the define were added
later, they were using a "magic" value of 255.

Cc: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/lirc/lirc_zilog.c: In function ‘send_code’:
drivers/staging/lirc/lirc_zilog.c:886:1: warning: label ‘done’ defined but not used
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/radio/radio-wl1273.c: In function ‘wl1273_fm_upload_firmware_patch’:
drivers/media/radio/radio-wl1273.c:675:2: warning: ‘n’ may be used uninitialized in this function
drivers/media/radio/radio-wl1273.c:675:2: warning: ‘i’ may be used uninitialized in this function

Those vars are never initialized, and the debug message makes no sense, as it
will show just two random values.

Cc: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-core/dmxdev.c: In function ‘dvb_dmxdev_start_feed’:
drivers/media/dvb/dvb-core/dmxdev.c:583:13: warning: comparison between ‘enum dmx_ts_pes’ and ‘enum <anonymous>’
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are some old broken definitions of ioctl's, where the
read/write arguments were marked wrong. The last one were added
on 2.6.6 kernel. Remove them, in order to cleanup some
copy_from_user/copy_to_user logic done inside V4L core.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/lirc/lirc_bt829.c:141: undefined reference to `lirc_register_driver'
drivers/built-in.o:(.rodata+0x20f68): undefined reference to `lirc_dev_fop_read'
drivers/built-in.o:(.rodata+0x20f7c): undefined reference to `lirc_dev_fop_poll'
drivers/built-in.o:(.rodata+0x20f8c): undefined reference to `lirc_dev_fop_open'
drivers/built-in.o:(.rodata+0x20f94): undefined reference to `lirc_dev_fop_close'
drivers/built-in.o:(.rodata+0x21030): undefined reference to `lirc_dev_fop_open'
drivers/built-in.o:(.rodata+0x21038): undefined reference to `lirc_dev_fop_close'

This happens when .config is like:
	CONFIG_LIRC=m
	CONFIG_IR_LIRC_CODEC=m
	CONFIG_LIRC_STAGING=y
	CONFIG_LIRC_BT829=y

Don't allow that.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This comment mentions a field that doesn't exist, and talks about
videodev.h that got removed. So, it doesn't make any sense to keep
it.
Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This example file uses the old V4L1 API. It also doesn't use libv4l.
So, it is completely obsolete. A good example already exists at
v4l-utils (v4l2grab.c):
	http://git.linuxtv.org/v4l-utils.gitReviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The V4L1 removal patches removed a few ioctls. Update it at the docspace.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There's no sense on keeping it on 2.6.38, as nobody is using it
anymore, at the kernel tree, and installing it at the userspace
API.

As two deprecated drivers still need it, move it to their internal
directories.
Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There's no sense on keeping VIDEO_V4L1 Kconfig option just because of
two deprecated drivers moved to staging scheduled to die on 2.6.39.
Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If write() on a VBI device node fails due to a bad buffer pointer from
userspace, we should notify the application properly with EFAULT, per the
V4L2 API spec.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

ivtv_write_vbi() is used for both VBI data that came from the
driver internally and VBI data that came from the user.  However,
it did not use copy_from_user() for reading the VBI data from the
user buffers.

This change adds a new version of the function,
ivtv_write_vbi_from_user(), that uses copy_from_user() to read the VBI
data provided via user buffers.

This should resolve a sparse build warning reported by Dave Gilbert.

Reported-by: Dr. David Alan Gilbert <linux at treblig.org>
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The cx18_stream struct contained a struct cx18_dvb for
every stream object, most of which were for analog capture.
Now we only allocate the cx18_dvb object for the DTV TS stream.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The error messages these drivers emitted for ioremap() failures
were misleading and not helpful for users.  Reworded those messages
to help the user take action to resolve vmalloc address space
exhaustion.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

While the V4L1 compatibility module has been removed, we still have
two V4L1 drivers that prevent full V4L1 removal.

Those drivers have been moved to staging and will be removed in 2.6.39,
together with the last V4L1 support.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Nobody stepped in to convert these drivers to V4L2, so they are now
removed from the kernel.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The se401 driver is deprecated and is moved to staging. If no one will
convert this driver to V4L2, then it will be removed in 2.6.39.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Move usbvideo to staging and mark it deprecated.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove ibmcam, konicawc and ultracam drivers. There are replaced by
gspca drivers.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All the functionality is now handled through V4L2.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>