- 15 5月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
The v2/3 and v4 cases were very similar, with just a few parameters changed. This makes it easy to share code. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 5月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Use the ctime to simulate a change attribute for NFSv2 and NFSv3. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2012 16 次提交
-
-
由 Bryan Schumaker 提交于
This simplifies the code for v2 and v3 and gives v4 a chance to decide on referrals without needing to modify the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
And also remove the unneeded rpc_op. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that needs to change when directio starts using these code paths. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
It is COMMIT that is handled the most differently between the paged and direct paths. Create a structure that encapsulates everything either path needs to know about the commit state. We could use void to hide some of the layout driver stuff, but Trond suggests pulling it out to ensure type checking, given the huge changes being made, and the fact that it doesn't interfere with other drivers. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that will need to change when directio starts using these code paths. This will allow directio to use the generic pagein and flush routines Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_write_data, and have (possibly multiple) nfs_write_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_write_header as a way to preallocate a single nfs_write_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_write_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_read_data, and have (possibly multiple) nfs_read_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_read_header as a way to preallocate a single nfs_read_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_read_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Both nfs_read_data and nfs_write_data devote several fields which can be combined into a single shared struct. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In order to avoid duplicating all the data in nfs_read_data whenever we split it up into multiple RPC calls (either due to a short read result or due to rsize < PAGE_SIZE), we split out the bits that are the same per RPC call into a separate "header" structure. The goal this patch moves towards is to have a single header refcounted by several rpc_data structures. Thus, want to always refer from rpc_data to the header, and not the other way. This patch comes close to that ideal, but the directio code currently needs some special casing, isolated in the nfs_direct_[read_write]hdr_release() functions. This will be dealt with in a future patch. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Make it consistent with nfs_initiate_commit. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Commits don't need the vectors of pages, etc. that writes do. Split out a separate structure for the commit operation. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The authflavor is set in an nfs_clone_mount structure and passed to the xdev_mount() functions where it was promptly ignored. Instead, use it to initialize an rpc_clnt for the cloned server. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I create a new proc_lookup_mountpoint() to use when submounting an NFS v4 share. This function returns an rpc_clnt to use for performing an fs_locations() call on a referral's mountpoint. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Whenever lookup sees wrongsec do a secinfo and retry the lookup to find attributes of the file or directory, such as "is this a referral mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC as part of getattr xdr decoding. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Move more pnfs-isms out of the generic commit code. Bugfixes: - filelayout_scan_commit_lists doesn't need to get/put the lseg. In fact since it is run under the inode->i_lock, the lseg_put() can deadlock. - Ensure that we distinguish between what needs to be done for commit-to-data server and what needs to be done for commit-to-MDS using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling put_lseg() on a bucket for a struct nfs_page that got written through the MDS. - Fix a case where we were using list_del() on an nfs_page->wb_list instead of list_del_init(). - filelayout_initiate_commit needs to call filelayout_commit_release on error instead of the mds_ops->rpc_release(). Otherwise it won't clear the commit lock. Cleanups: - Let the files layout manage the commit lists for the pNFS case. Don't expose stuff like pnfs_choose_commit_list, and the fact that the commit buckets hold references to the layout segment in common code. - Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg into the pNFS layer from whence they came. - Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 11 3月, 2012 1 次提交
-
-
由 Fred Isaman 提交于
The radix tree is only being used to compile lists of reqs needing commit. It is simpler to just put the reqs directly into a list. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 2月, 2012 4 次提交
-
-
由 Stanislav Kinsbursky 提交于
Network namespace is taken from request transport and passed as a part of cb_process_state structure. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch makes nfs_clients_lock allocated per network namespace. All items it protects are already network namespace aware. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch makes ID's infrastructure network namespace aware. This was done mainly because of nfs_client_lock, which is desired to be per network namespace, but protects NFS clients ID's. NOTE: NFS client's net pointer have to be set prior to ID initialization, proper assignment was moved. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch splits global list of NFS clients into per-net-ns array of lists. This looks more strict and clearer. BTW, this patch also makes "/proc/fs/nfsfs/servers" entry content depends on /proc mount owner pid namespace. See below for details. NOTE: few words about how was /proc/fs/nfsfs/ entries content show per network namespace done. This is a little bit tricky and not the best is could be. But it's cheap (proper fix for /proc conteinerization is a hard nut to crack). The idea is simple: take proper network namespace from pid namespace child reaper nsproxy of /proc/ mount creator. This actually means, that if there are 2 containers with different net namespace sharing pid namespace, then read of /proc/fs/nfsfs/ entries will always return content, taken from net namespace of pid namespace creator task (and thus second namespace set wil be unvisible). Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 2月, 2012 5 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Looks like this function survived after some cleanup patch without a reason. Now it's not called or referenced and I believe, that it can be simply removed. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
v2: 1) Added "nfs_idmap_init" and "nfs_idmap_quit" definitions for kernels built without CONFIG_NFS_V4 option set. This patch subscribes NFS clients to RPC pipefs notifications. Idmap notifier is registering on NFS module load. This notifier callback is responsible for creation/destruction of PipeFS idmap pipe dentry for NFS4 clients. Since ipdmap pipe is created in rpc client pipefs directory, we have make sure, that this directory has been created already. IOW RPC client notifier callback has been called already. To achive this, PipeFS notifier priorities has been introduced (RPC clients notifier priority is greater than NFS idmap one). But this approach gives another problem: unlink for RPC client directory will be called before NFS idmap pipe unlink on UMOUNT event and will fail, because directory is not empty. The solution, introduced in this patch, is to try to remove client directory once again after idmap pipe was unlinked. This looks like ugly hack, so probably it should be replaced in some more elegant way. Note that no locking required in notifier callback because PipeFS superblock pointer is passed as an argument from it's creation or destruction routine and thus we can be sure about it's validity. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch replaces static "init_net" with nfs_client->net pointer in RPC client creation calls. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch adds new net variable to nfs_client structure. This variable is set on NFS client creation and cheched during matching NFS client search. Initially current->nsproxy->net_ns is used as network namespace owner for new NFS client to create. This network namespace pointer is set during mount options parsing and thus can be passed from user-spave utils in future if will be necessary. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 1月, 2012 2 次提交
-
-
由 Mel Gorman 提交于
This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT mode that avoids writing back pages to backing storage. Async compaction maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT. For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is used. This avoids sync compaction stalling for an excessive length of time, particularly when copying files to a USB stick where there might be a large number of dirty pages backed by a filesystem that does not support ->writepages. [aarcange@redhat.com: This patch is heavily based on Andrea's work] [akpm@linux-foundation.org: fix fs/nfs/write.c build] [akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build] Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Asynchronous compaction is used when allocating transparent hugepages to avoid blocking for long periods of time. Due to reports of stalling, there was a debate on disabling synchronous compaction but this severely impacted allocation success rates. Part of the reason was that many dirty pages are skipped in asynchronous compaction by the following check; if (PageDirty(page) && !sync && mapping->a_ops->migratepage != migrate_page) rc = -EBUSY; This skips over all mapping aops using buffer_migrate_page() even though it is possible to migrate some of these pages without blocking. This patch updates the ->migratepage callback with a "sync" parameter. It is the responsibility of the callback to fail gracefully if migration would block. Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
We have no business doing any this in the standard write release path. Get rid of it, and put it in the pNFS layer. Also, while we're at it, get rid of the completely bogus unlock/relock semantics that were present in nfs_writeback_release_full(). It is not only unnecessary, but actually dangerous to release the write lock just in order to take it again in nfs_page_async_flush(). Better just to open code the pgio operations in a pnfs helper. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 11月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
pNFS-specific code belongs in the pnfs layer. It should not be hijacking generic NFS read or write code paths. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 10月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
It can trivially be replaced with rpc_restart_call_prepare. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 7月, 2011 3 次提交
-
-
由 Trond Myklebust 提交于
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of completely reinitialising the struct nfs_pageio_descriptor. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in differences in block sizes when falling back to write through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in block sizes when falling back to read through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 7月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find the secflavor for the initial mount. If the server doesn't support SECINFO_NO_NAME then I fall back on the "guess and check" method used for v4.0 mounts. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 6月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
Commit 28331a46 "Ensure we request the ordinary fileid when doing readdirplus" changed the meaning of NFS_ATTR_FATTR_FILEID which used to be set when FATTR4_WORD1_MOUNTED_ON_FILED was requested. Allow nfs_fhget to succeed with only a mounted on fileid when crossing a mountpoint or a referral. Ask for the fileid of the absent file system if mounted_on_fileid is not supported. Signed-off-by: NAndy Adamson <andros@netapp.com> cc:stable@kernel.org [2.6.39] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-