If data are overwritten through dio, previous f2fs doesn't remain the fsync mark
due to no additional node writes.

Note that this patch should resolve the xfstests:311.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

f2fs's cp has one page which consists of struct f2fs_checkpoint and
version bitmap of sit and nat. To support lots of segments, we need more
blocks for sit bitmap. So let's arrange sit bitmap as following:
+-----------------+------------+
| f2fs_checkpoint | sit bitmap |
| + nat bitmap    |            |
+-----------------+------------+
0                 4k        N blocks
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: simple code change for readability]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously we allocate pages with no mapping in ra_sum_pages(), so we may
encounter a crash in event trace of f2fs_submit_page_mbio where we access
mapping data of the page.

We'd better allocate pages in bd_inode mapping and invalidate these pages after
we restore data from pages. It could avoid crash in above scenario.

Changes from V1
 o remove redundant code in ra_sum_pages() suggested by Jaegeuk Kim.

Call Trace:
 [<f1031630>] ? ftrace_raw_event_f2fs_write_checkpoint+0x80/0x80 [f2fs]
 [<f10377bb>] f2fs_submit_page_mbio+0x1cb/0x200 [f2fs]
 [<f103c5da>] restore_node_summary+0x13a/0x280 [f2fs]
 [<f103e22d>] build_curseg+0x2bd/0x620 [f2fs]
 [<f104043b>] build_segment_manager+0x1cb/0x920 [f2fs]
 [<f1032c85>] f2fs_fill_super+0x535/0x8e0 [f2fs]
 [<c115b66a>] mount_bdev+0x16a/0x1a0
 [<f102f63f>] f2fs_mount+0x1f/0x30 [f2fs]
 [<c115c096>] mount_fs+0x36/0x170
 [<c1173635>] vfs_kern_mount+0x55/0xe0
 [<c1175388>] do_mount+0x1e8/0x900
 [<c1175d72>] SyS_mount+0x82/0xc0
 [<c16059cc>] sysenter_do_call+0x12/0x22
Suggested-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When large directory feathure is enable, We have one case which could cause
overflow in dir_buckets() as following:
special case: level + dir_level >= 32 and level < MAX_DIR_HASH_DEPTH / 2.

Here we define MAX_DIR_BUCKETS to limit the return value when the condition
could trigger potential overflow.

Changes from V1
 o modify description of calculation in f2fs.txt suggested by Changman Lee.
Suggested-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch should resolve the following recursive lock.

[<ffffffff8135a9c3>] call_rwsem_down_write_failed+0x13/0x20
[<ffffffffa01749dc>] f2fs_setxattr+0x5c/0xa0 [f2fs]
[<ffffffffa0174c99>] __f2fs_set_acl+0x1b9/0x340 [f2fs]
[<ffffffffa017515a>] f2fs_init_acl+0x4a/0xcb [f2fs]
[<ffffffffa0159abe>] __f2fs_add_link+0x26e/0x780 [f2fs]
[<ffffffffa015d4d8>] f2fs_mkdir+0xb8/0x150 [f2fs]
[<ffffffff811cebd7>] vfs_mkdir+0xb7/0x160
[<ffffffff811cf89b>] SyS_mkdir+0xab/0xe0
[<ffffffff817244bf>] tracesys+0xe1/0xe6
[<ffffffffffffffff>] 0xffffffffffffffff

The call path indicates:
- f2fs_add_link
   : down_write(&fi->i_sem);

 - init_inode_metadata
   - f2fs_init_acl
     - __f2fs_set_acl
       - f2fs_setxattr
         : down_write(&fi->i_sem);

Here we should not call f2fs_setxattr, but __f2fs_setxattr.
But __f2fs_setxattr is a static function in xattr.c, so that I found the other
generic approach to use f2fs_setxattr.

In f2fs_setxattr, the page pointer is only given from init_inode_metadata.
So, this patch adds this condition to avoid this in f2fs_setxattr.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds a samsung guy for an F2FS maintainer.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch changes the valid email address to maintain the f2fs file system.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch uses exported inode_init_owner() to simplify codes in
f2fs_new_inode().
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If we use slab memory in f2fs_issue_flush(), we will face memory pressure and
latency time caused by racing of kmem_cache_{alloc,free}.

Let's alloc memory in stack instead of slab.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_read_data_page to trace when page is
readed by user.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when
pages are fsyncing/flushing.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when
page is writting out.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_write_end to trace write op of user.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_write_begin to trace write op of user.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

fix the following checkpatch warning:
WARNING: do {} while (0) macros should not be semicolon terminated
Signed-off-by: NZhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If the inode page is clean during its inode eviction, it'd better drop the page
to reduce further memory pressure.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch reduces the lock granularity during write_begin.
When the system is under memory pressure, it would be better to reduce
the locking time for the data pages.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes grab_cache_page_write_begin for meta pages.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We don't need to wait on page writeback for these cases.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch splits grab_cache_page_write_begin into grab_cache_page and
wait_on_page_writeback for node pages.

This patch intends to enhance the latency to get node pages by alleviating
unnecessary wait_on_page_writeback.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previous we do not truncate inline data in inode page when setattr, so following
case could still read the inline data which has already truncated:

1.write inline data
2.ftruncate size to 0
3.ftruncate size to max inline data size
4.read from offset 0

This patch introduces truncate_inline_data() to fix this problem.

change log from v1:
 o fix a bug and do not truncate first page data after truncate inline data.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We have no so such readahead mechanism in ->iterate() path as the one in
->read() path, it cause low performance when we read large directory.
This patch add readahead in f2fs_readdir() for better performance.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We should set the error number correctly when we fail in recover_dentry(), so
the recover flow could stop for the reason as error number shows instead of
continuing.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If an amount of data are allocated though fallocate and user writes a couple of
data among the space, f2fs should return the data offset made by user when
SEEK_DATA is requested.

For example, (N: NEW_ADDR by fallocate, X: NEW_ADDR by user)
1) fallocate 0 ~ 10MB
f -> N N N N N N N N N N N N ... N

2) write 4KB at 5MB offset
f -> N N N N N X N N N N N N ... N

3) SEEK_DATA from 0 should return 5MB offset

So, this patch adds a routine to search the first dirty page to handle that.
Then, the SEEK_DATA flow skips NEW_ADDR offsets until any dirty page is found.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When SEEK_HOLE is requeted, it should return i_size if the hole position is
found outside of i_size.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In This patch we introduce f2fs_seek_block to support SEEK_{DATA,HOLE} of
lseek(2).

change log from v1:
 o fix bug when lseek from middle of page and fix wrong calculation of
PGOFS_OF_NEXT_DNODE macro.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help function {create,destroy}_flush_cmd_control to clean up
the create/destory flush merge operation.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Split the flush_merge fields from sm_i, and use the new struct flush_cmd_control
to wrap it, so that we can igonre these fileds if flush_merge is disable, and
it alse can the structs more neat.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in
direct node or inode.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If f2fs_write_data_page is called through the reclaim path, we should submit
the bio right away.

This patch resolves the following issue that Marc Dietrich reported.
"It took me a while to bisect a problem which causes my ARM (tegra2) netbook to
frequently stall for 5-10 seconds when I enable EXA acceleration (opentegra
experimental ddx)."
And this patch fixes that.
Reported-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds two error conditions early in the setxattr operations.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch passes the "flags" field to the low level setxattr functions
to use XATTR_REPLACE in the following patches.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch includes simple clean-ups to reduce unnecessary long variable names.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We'd better handle inline data case independently in f2fs_bmap().
It can reduce our handling time in f2fs_bmap().
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If so many dirty dentry blocks are cached, not reached to the flush condition,
we should fall into livelock in balance_dirty_pages.
So, let's consider the mem size for the condition.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If the disk has some garbage blocks, F2FS is able to face with BUG_ON when
recovering direct node blocks.
This patch detects the error case and avoids that prior to reaching BUG_ON.

Alexey Khoroshilov addressed the potential security issues as follows.
"An ability to trigger a BUG_ON assert by mounting a crafted image is
usually considered as a local denial of service [1-3]. As far as I
understand, the reason is that some kernel data may become inconsistent
that can lead to further problems.

[1] http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3353
[2] http://www.openwall.com/lists/oss-security/2011/06/24/4
[3] http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2928
etc."
Reported-by: NAndrey Tsyvarev <tsyvarev@ispras.ru>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces available_nids for alloc_nids() and fixes max_nid for
build_free_nids() and scan_nat_pages().
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

inline get_max_meta_blks is only used in checkpoint.c
Use standard static inline format.

Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduce raw_nat_from_node_info() to simplfy some codes, and also
use exist function node_info_from_raw_nat() to do the same job.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Add the *remount* handle of flush_merge option, so that the users
can enable flush_merge in the runtime, such as the underlying device
handles the cache_flush command relatively slowly.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>