- 20 10月, 2009 8 次提交
-
-
由 Herbert Xu 提交于
This patch tries to print out more information when we hit the MSG_PEEK bug in tcp_recvmsg. It's been around since at least 2005 and it's about time that we finally fix it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ipv4/ipv6 setsockopt(IP_MULTICAST_IF) have dubious __dev_get_by_index() calls. This function should be called only with RTNL or dev_base_lock held, or reader could see a corrupt hash chain and eventually enter an endless loop. Fix is to call dev_get_by_index()/dev_put(). If this happens to be performance critical, we could define a new dev_exist_by_index() function to avoid touching dev refcount. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
When shutdown ppp connection, lockdep waring about non-static key will happen, it is caused by the lock is not initialized properly at that time. Fix with tuning the lock/skb_queue_head init order [ 94.339261] INFO: trying to register non-static key. [ 94.342509] the code is fine but needs lockdep annotation. [ 94.342509] turning off the locking correctness validator. [ 94.342509] Pid: 0, comm: swapper Not tainted 2.6.31-mm1 #2 [ 94.342509] Call Trace: [ 94.342509] [<c0248fbe>] register_lock_class+0x58/0x241 [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c024ab34>] __lock_acquire+0xac/0xb73 [ 94.342509] [<c024b7fa>] ? lock_release_non_nested+0x17b/0x1de [ 94.342509] [<c024b662>] lock_acquire+0x67/0x84 [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c054a857>] _spin_lock_irqsave+0x2f/0x3f [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c04cd1eb>] skb_dequeue+0x15/0x41 [ 94.342509] [<c054a648>] ? _read_unlock+0x1d/0x20 [ 94.342509] [<c04cd641>] skb_queue_purge+0x14/0x1b [ 94.342509] [<fab94fdc>] l2cap_recv_frame+0xea1/0x115a [l2cap] [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c0249c04>] ? mark_lock+0x1e/0x1c7 [ 94.342509] [<f8364963>] ? hci_rx_task+0xd2/0x1bc [bluetooth] [ 94.342509] [<fab95346>] l2cap_recv_acldata+0xb1/0x1c6 [l2cap] [ 94.342509] [<f8364997>] hci_rx_task+0x106/0x1bc [bluetooth] [ 94.342509] [<fab95295>] ? l2cap_recv_acldata+0x0/0x1c6 [l2cap] [ 94.342509] [<c02302c4>] tasklet_action+0x69/0xc1 [ 94.342509] [<c022fbef>] __do_softirq+0x94/0x11e [ 94.342509] [<c022fcaf>] do_softirq+0x36/0x5a [ 94.342509] [<c022fe14>] irq_exit+0x35/0x68 [ 94.342509] [<c0204ced>] do_IRQ+0x72/0x89 [ 94.342509] [<c02038ee>] common_interrupt+0x2e/0x34 [ 94.342509] [<c024007b>] ? pm_qos_add_requirement+0x63/0x9d [ 94.342509] [<c038e8a5>] ? acpi_idle_enter_bm+0x209/0x238 [ 94.342509] [<c049d238>] cpuidle_idle_call+0x5c/0x94 [ 94.342509] [<c02023f8>] cpu_idle+0x4e/0x6f [ 94.342509] [<c0534153>] rest_init+0x53/0x55 [ 94.342509] [<c0781894>] start_kernel+0x2f0/0x2f5 [ 94.342509] [<c0781091>] i386_start_kernel+0x91/0x96 Reported-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Tested-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
Due to driver core changes dev_set_drvdata will call kzalloc which should be in might_sleep context, but hci_conn_add will be called in atomic context Like dev_set_name move dev_set_drvdata to work queue function. oops as following: Oct 2 17:41:59 darkstar kernel: [ 438.001341] BUG: sleeping function called from invalid context at mm/slqb.c:1546 Oct 2 17:41:59 darkstar kernel: [ 438.001345] in_atomic(): 1, irqs_disabled(): 0, pid: 2133, name: sdptool Oct 2 17:41:59 darkstar kernel: [ 438.001348] 2 locks held by sdptool/2133: Oct 2 17:41:59 darkstar kernel: [ 438.001350] #0: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.+.}, at: [<faa1d2f5>] lock_sock+0xa/0xc [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001360] #1: (&hdev->lock){+.-.+.}, at: [<faa20e16>] l2cap_sock_connect+0x103/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001371] Pid: 2133, comm: sdptool Not tainted 2.6.31-mm1 #2 Oct 2 17:41:59 darkstar kernel: [ 438.001373] Call Trace: Oct 2 17:41:59 darkstar kernel: [ 438.001381] [<c022433f>] __might_sleep+0xde/0xe5 Oct 2 17:41:59 darkstar kernel: [ 438.001386] [<c0298843>] __kmalloc+0x4a/0x15a Oct 2 17:41:59 darkstar kernel: [ 438.001392] [<c03f0065>] ? kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001396] [<c03f0065>] kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001400] [<c03f04ff>] device_private_init+0x15/0x3d Oct 2 17:41:59 darkstar kernel: [ 438.001405] [<c03f24c5>] dev_set_drvdata+0x18/0x26 Oct 2 17:41:59 darkstar kernel: [ 438.001414] [<fa51fff7>] hci_conn_init_sysfs+0x40/0xd9 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001422] [<fa51cdc0>] ? hci_conn_add+0x128/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001429] [<fa51ce0f>] hci_conn_add+0x177/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001437] [<fa51cf8a>] hci_connect+0x3c/0xfb [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001442] [<faa20e87>] l2cap_sock_connect+0x174/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001448] [<c04c8df5>] sys_connect+0x60/0x7a Oct 2 17:41:59 darkstar kernel: [ 438.001453] [<c024b703>] ? lock_release_non_nested+0x84/0x1de Oct 2 17:41:59 darkstar kernel: [ 438.001458] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001462] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001468] [<c033361f>] ? __copy_from_user_ll+0x11/0xce Oct 2 17:41:59 darkstar kernel: [ 438.001472] [<c04c9419>] sys_socketcall+0x82/0x17b Oct 2 17:41:59 darkstar kernel: [ 438.001477] [<c020329d>] syscall_call+0x7/0xb Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Fix TCP_DEFER_ACCEPT conversion between seconds and retransmission to match the TCP SYN-ACK retransmission periods because the time is converted to such retransmissions. The old algorithm selects one more retransmission in some cases. Allow up to 255 retransmissions. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Change SYN-ACK retransmitting code for the TCP_DEFER_ACCEPT users to not retransmit SYN-ACKs during the deferring period if ACK from client was received. The goal is to reduce traffic during the deferring period. When the period is finished we continue with sending SYN-ACKs (at least one) but this time any traffic from client will change the request to established socket allowing application to terminate it properly. Also, do not drop acked request if sending of SYN-ACK fails. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Willy Tarreau and many other folks in recent years were concerned what happens when the TCP_DEFER_ACCEPT period expires for clients which sent ACK packet. They prefer clients that actively resend ACK on our SYN-ACK retransmissions to be converted from open requests to sockets and queued to the listener for accepting after the deferring period is finished. Then application server can decide to wait longer for data or to properly terminate the connection with FIN if read() returns EAGAIN which is an indication for accepting after the deferring period. This change still can have side effects for applications that expect always to see data on the accepted socket. Others can be prepared to work in both modes (with or without TCP_DEFER_ACCEPT period) and their data processing can ignore the read=EAGAIN notification and to allocate resources for clients which proved to have no data to send during the deferring period. OTOH, servers that use TCP_DEFER_ACCEPT=1 as flag (not as a timeout) to wait for data will notice clients that didn't send data for 3 seconds but that still resend ACKs. Thanks to Willy Tarreau for the initial idea and to Eric Dumazet for the review and testing the change. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 6d01a026. Julian Anastasov, Willy Tarreau and Eric Dumazet have come up with a more correct way to deal with this. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2009 3 次提交
-
-
由 Tomoki Sekiyama 提交于
I found a deadlock bug in UNIX domain socket, which makes able to DoS attack against the local machine by non-root users. How to reproduce: 1. Make a listening AF_UNIX/SOCK_STREAM socket with an abstruct namespace(*), and shutdown(2) it. 2. Repeat connect(2)ing to the listening socket from the other sockets until the connection backlog is full-filled. 3. connect(2) takes the CPU forever. If every core is taken, the system hangs. PoC code: (Run as many times as cores on SMP machines.) int main(void) { int ret; int csd; int lsd; struct sockaddr_un sun; /* make an abstruct name address (*) */ memset(&sun, 0, sizeof(sun)); sun.sun_family = PF_UNIX; sprintf(&sun.sun_path[1], "%d", getpid()); /* create the listening socket and shutdown */ lsd = socket(AF_UNIX, SOCK_STREAM, 0); bind(lsd, (struct sockaddr *)&sun, sizeof(sun)); listen(lsd, 1); shutdown(lsd, SHUT_RDWR); /* connect loop */ alarm(15); /* forcely exit the loop after 15 sec */ for (;;) { csd = socket(AF_UNIX, SOCK_STREAM, 0); ret = connect(csd, (struct sockaddr *)&sun, sizeof(sun)); if (-1 == ret) { perror("connect()"); break; } puts("Connection OK"); } return 0; } (*) Make sun_path[0] = 0 to use the abstruct namespace. If a file-based socket is used, the system doesn't deadlock because of context switches in the file system layer. Why this happens: Error checks between unix_socket_connect() and unix_wait_for_peer() are inconsistent. The former calls the latter to wait until the backlog is processed. Despite the latter returns without doing anything when the socket is shutdown, the former doesn't check the shutdown state and just retries calling the latter forever. Patch: The patch below adds shutdown check into unix_socket_connect(), so connect(2) to the shutdown socket will return -ECONREFUSED. Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Signed-off-by: NMasanori Yoshida <masanori.yoshida.tv@hitachi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Chou 提交于
This patch fixed the problem of dropped packets due to lost of interrupt requests. We should only clear what was pending at the moment we read the irq source reg. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Chou 提交于
Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2009 1 次提交
-
-
由 Randy Dunlap 提交于
vmxnet3 was using dprintk() for debugging output. This was defined in <linux/dst.h> and was the only thing that was used from that header file. This caused compile errors when CONFIG_BLOCK was not enabled due to bio* and BIO* uses in the header file, so change this driver to use dev_dbg() for debugging output. include/linux/dst.h:520: error: dereferencing pointer to incomplete type include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function) include/linux/dst.h:521: error: dereferencing pointer to incomplete type include/linux/dst.h:522: error: dereferencing pointer to incomplete type include/linux/dst.h:525: error: dereferencing pointer to incomplete type make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2009 8 次提交
-
-
由 Eric Dumazet 提交于
Because netpoll can call netdevice start_xmit() method with irqs disabled, drivers should not call kfree_skb() from their start_xmit(), but use dev_kfree_skb_any() instead. Oct 8 11:16:52 172.30.1.31 [113074.791813] ------------[ cut here ]------------ Oct 8 11:16:52 172.30.1.31 [113074.791813] WARNING: at net/core/skbuff.c:398 \ skb_release_head_state+0x64/0xc8() Oct 8 11:16:52 172.30.1.31 [113074.791813] Hardware name: Oct 8 11:16:52 172.30.1.31 [113074.791813] Modules linked in: netconsole ocfs2 jbd2 quota_tree \ ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs crc32c drbd cn loop \ serio_raw psmouse snd_pcm snd_timer snd soundcore snd_page_alloc virtio_net pcspkr parport_pc parport \ i2c_piix4 i2c_core button processor evdev ext3 jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot \ dm_mod ide_cd_mod cdrom ata_generic ata_piix virtio_blk libata scsi_mod piix ide_pci_generic ide_core \ virtio_pci virtio_ring virtio floppy thermal fan thermal_sys [last unloaded: netconsole] Oct 8 11:16:52 172.30.1.31 [113074.791813] Pid: 11132, comm: php5-cgi Tainted: G W \ 2.6.31.2-vserver #1 Oct 8 11:16:52 172.30.1.31 [113074.791813] Call Trace: Oct 8 11:16:52 172.30.1.31 [113074.791813] <IRQ> [<ffffffff81253cd5>] ? \ skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049ae1>] ? warn_slowpath_common+0x77/0xa3 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253a1a>] ? __kfree_skb+0x9/0x7d Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cb139>] ? free_old_xmit_skbs+0x51/0x6e \ [virtio_net] Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cbc85>] ? start_xmit+0x26/0xf2 [virtio_net] Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8126934f>] ? netpoll_send_skb+0xd2/0x205 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa0429216>] ? write_msg+0x90/0xeb [netconsole] Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049f06>] ? __call_console_drivers+0x5e/0x6f Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a082>] ? release_console_sem+0x115/0x1ba Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a632>] ? vprintk+0x2f2/0x34b Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8106b142>] ? vx_update_load+0x18/0x13e Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81308309>] ? printk+0x4e/0x5d Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81070b62>] ? getnstimeofday+0x55/0xaf Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062683>] ? ktime_get_ts+0x21/0x49 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff810626b7>] ? ktime_get+0xc/0x41 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062788>] ? hrtimer_interrupt+0x9c/0x146 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81024a4b>] ? smp_apic_timer_interrupt+0x80/0x93 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81011663>] ? apic_timer_interrupt+0x13/0x20 Oct 8 11:16:52 172.30.1.31 [113074.791813] <EOI> [<ffffffff8130a9eb>] ? _spin_unlock_irq+0xd/0x31 Reported-and-tested-by: NMassimo Cetra <mcetra@navynet.it> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Bug-Entry: http://bugzilla.kernel.org/show_bug.cgi?id=14378Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Before issuing any cmds to the FW, the driver must first wait till the fW becomes ready. This is needed for PCI hot plug when the driver can be probed while the card fw is being initialized. Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
vmxnet3 uses in_dev* interfaces so it should depend on INET. Also fix so that the driver builds when CONFIG_PCI_MSI is disabled. vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy' drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NBhavesh davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmacSigned-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
From: Randy Dunlap <randy.dunlap@oracle.com> ks8851_mll uses mii interfaces so it needs to select MII. ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl' ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset' ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset' ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok' ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Bonesio 提交于
The MDIO bus cannot be accessed at interrupt context, but on an FEC error, the fec_mpc52xx driver reset function also tries to reset the PHY. Since the error is detected at IRQ context, and the PHY functions try to sleep, the kernel ends up panicking. Resetting the PHY on an FEC error isn't even necessary. This patch solves the problem by removing the PHY reset entirely. Signed-off-by: NJohn Bonesio <bones@secretlab.ca> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vorontsov 提交于
Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2009 3 次提交
-
-
由 Sriram 提交于
The mechanism to clear the statistics register is dependent on the status of GMIIEN bit in MAC control register. If the GMIIEN bit is set, the stats registers are write to decrement. If the GMIIEN bit is cleared, the stats registers are plain read/write registers. The stats register clearing operation must take into account the current state of GMIIEN as it can be cleared when the interface is brought down. With existing implementation logic, querying for interface stats when the interface is down, can corrupt the statistics counters. This patch examines the GMIIEN bit status in MAC_CONTROL register before choosing an appropriate mask for clearing stats registers. Signed-off-by: NSriramakrishnan <srk@ti.com> Acked-by: NChaithrika U S <chaithrika@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Extracted from Realtek's 8.012.00 r8168 driver. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Tested-by: NSimon Farnsworth <simon.farnsworth@onelan.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2009 17 次提交
-
-
由 Dmitry Artamonow 提交于
Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
udp_poll() can in some circumstances drop frames with incorrect checksums. Problem is we now have to lock the socket while dropping frames, or risk sk_forward corruption. This bug is present since commit 95766fff ([UDP]: Add memory accounting.) While we are at it, we can correct ioctl(SIOCINQ) to also drop bad frames. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krzysztof Halasa 提交于
Cisco HDLC uses keepalive packets and sequence numbers to determine link state. In rare cases both ends could transmit keepalive packets at the same time, causing the received sequence numbers to be treated as incorrect. Now we accept our current sequence number as well as the previous one. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willy Tarreau 提交于
I was trying to use TCP_DEFER_ACCEPT and noticed that if the client does not talk, the connection is never accepted and remains in SYN_RECV state until the retransmits expire, where it finally is deleted. This is bad when some firewall such as netfilter sits between the client and the server because the firewall sees the connection in ESTABLISHED state while the server will finally silently drop it without sending an RST. This behaviour contradicts the man page which says it should wait only for some time : TCP_DEFER_ACCEPT (since Linux 2.4) Allows a listener to be awakened only when data arrives on the socket. Takes an integer value (seconds), this can bound the maximum number of attempts TCP will make to complete the connection. This option should not be used in code intended to be portable. Also, looking at ipv4/tcp.c, a retransmit counter is correctly computed : case TCP_DEFER_ACCEPT: icsk->icsk_accept_queue.rskq_defer_accept = 0; if (val > 0) { /* Translate value in seconds to number of * retransmits */ while (icsk->icsk_accept_queue.rskq_defer_accept < 32 && val > ((TCP_TIMEOUT_INIT / HZ) << icsk->icsk_accept_queue.rskq_defer_accept)) icsk->icsk_accept_queue.rskq_defer_accept++; icsk->icsk_accept_queue.rskq_defer_accept++; } break; ==> rskq_defer_accept is used as a counter of retransmits. But in tcp_minisocks.c, this counter is only checked. And in fact, I have found no location which updates it. So I think that what was intended was to decrease it in tcp_minisocks whenever it is checked, which the trivial patch below does. Signed-off-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
3c574_cs: spin_lock the set_multicast_list function. Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Rankin 提交于
The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product IDs as the Belkin F5D5050, so we need to teach the pegasus driver to ignore adaptors belonging to the "Wireless" class 0xE0. For this one case anyway, seeing as pegasus is a driver for "Wired" adaptors. Signed-off-by: NChris Rankin <rankincj@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Use resource_size_t for PCI resource remapping instead of unsigned long. Physical addresses can exceed range of long data type (e.g with PAE). Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
drivers/net/ethoc.c: In function ‘ethoc_open’: drivers/net/ethoc.c:667: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’: drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it appears in.) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara@vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NRonghua Zhang <ronghua@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vincent Sanders 提交于
The IXP 2000 network driver was failing to build as it has its own statistics gathering which was not compatible with the recent network device operations changes. This patch fixes the driver in the obvious way and has been compile tested. I have been unable to get the ixp2000 maintainer to comment or test this fix. Signed-off-by: NVincent Sanders <vince@simtec.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’: drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it appears in.) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
ieee80211_rx() must be called with softirqs disabled since the networking stack requires this for netif_rx() and some code in mac80211 can assume that it can not be processing its own tasklet and this call at the same time. It may be possible to remove this requirement after a careful audit of mac80211 and doing any needed locking improvements in it along with disabling softirqs around netif_rx(). An alternative might be to push all packet processing to process context in mac80211, instead of to the tasklet, and add other synchronisation. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Due to the way it interacts with the networking stack and other parts of mac80211, ieee80211_rx() must be called with disabled softirqs. [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/39440/focus=40266Reported-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When a scan completes, we call ieee80211_sta_find_ibss(), which is also called from other places. When the scan was done in software, there's no problem as both run from the single-threaded mac80211 workqueue and are thus serialised against each other, but with hardware scan the completion can be in a different context and race against callers of this function from the workqueue (e.g. due to beacon RX). So instead of calling ieee80211_sta_find_ibss() directly, just arm the timer and have it fire, scheduling the work, which will invoke ieee80211_sta_find_ibss() (if that is appropriate in the current state). Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Need to free the dynamic allocated memory before ieee80211_free_hw(); once call ieee80211_free_hw(), should not reference to "priv" data structure. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-