The port ops must be set AFTER calling port init as that function
zeroes the structure
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

PCH_DMA is not always enabled when a user uses PCH_UART.
Since overhead of DMA is not small, in case of low frequent
communication, without DMA is better.
Thus, "select PCH_DMA" and DMADEVICES are unnecessary
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

m68k_serial->tqueue_hangup is unused.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On some platforms, we need to restore the console speed on resume even
it was not suspended (no_console_suspend), and on others we don't have
to do that.

So don't care about the "console_suspend_enabled" and unconditionally
reset the console speed if it is a console.

This is actually a redo of ba15ab0e (Set proper console speed on resume
if console suspend is disabled) from Deepak Saxena.  I also tried to
investigate more to find out if this change will break others, here is
what I've found out:

commit 891b9dd1
Author: Jason Wang <jason77.wang@gmail.com>
    serial-core: restore termios settings when resume console ports

commit ca2e71aa
Author: Jason Wang <jason77.wang@gmail.com>
    serial-core: skip call set_termios/console_start when no_console_suspend

commit 4547be78
Author: Stanislav Brabec <sbrabec@suse.cz>
    serial-core: resume serial hardware with no_console_suspend

commit ba15ab0e
Author: Deepak Saxena <dsaxena@laptop.org>
    Set proper console speed on resume if console suspend is disabled

from ba15ab0e, we learned that, even if the console suspend is disabled
(when no_console_suspend is set), we may still need to "reset the port
to the state it was in before we suspended."

Then with 4547be78, this piece of code is removed.

And then Jason Wang added that back in ca2e71aa and 891b9dd1, to fix
some breakage on OMAP3EVM platform. From ca2e71aa we learned that the
"set_termios" things is actually needed by both console is suspended
and not suspended.

That's why I removed the console_suspended_enabled condition, and only
call console_start() when we actually suspeneded it.

I also noticed in this thread:
http://marc.info/?t=129079257100004&r=1&w=2, which talked about on
some platforms, UART HW will be cut power whether or not we set
no_console_suspend, and then on resume it does not work quite well. I
have a similar HW, and this patch fixed this issue, don't know if this
patch also works on their platforms.

[Update: Stanislav tested this patch on Zaurus and reported it improves the
situation. Thanks.]

CC: Greg KH <greg@kroah.com>
CC: Deepak Saxena <dsaxena@laptop.org>
CC: Jason Wang <jason77.wang@gmail.com>
CC: Stanislav Brabec <sbrabec@suse.cz>
CC: Daniel Drake <dsd@laptop.org>
Signed-off-by: NYin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is used to store the spi_device ->modalias so they have to be the same
size.  SPI_NAME_SIZE is 32.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

OMAP can do also dynamic idling so wake-up enable register should be set
also while system is running. If UART_OMAP_WER is not set, then for instance
the RX activity cannot wake up the UART port that is sleeping.

This RX wake-up feature was working when the 8250 driver was used instead
of omap-serial. Reason for this is that the 8250 doesn't set the
UART_OMAP_WER and then arch/arm/mach-omap2/pm34xx.c ends up saving and
restoring the reset default which is the same than value
OMAP_UART_WER_MOD_WKUP here.

Fix this by moving the conditional UART_OMAP_WER write from serial_omap_pm
into serial_omap_startup where wake-up bits are set unconditionally.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Cc: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Magic SysRq key is not working for OMAP on new serial
console ttyOx because SUPPORT_SYSRQ is not defined
for omap-serial.

This patch defines SUPPORT_SYSRQ in omap-serial and
enables handling of Magic SysRq character.

Further there is an issue of losing first break character.
Removing the reset of the lsr_break_flag fixes this issue.
Signed-off-by: NThomas Weber <weber@corscience.de>
Acked-by: NGovindraj.R <govindraj.raja@ti.com>
Tested-by: NManjunath G Kondaiah <manjugk@ti.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some platform attributes (e.g. max_hz, use_dma) were being intuited
from the modem type. These things should be specified by the platform
data.

Added max_hz, use_dma to ifx_modem_platform_data definition,
replaced is_6160 w/ modem_type, and changed clients accordingly
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is kind of a revert for commit 669b7a09 "hsu: add a periodic
timer to check dma rx channel", which is a workaround for a bug in A0
stepping silicon, where a dma rx data timeout is missing for some case.
Since new silicon has fixed it and the old version is phasing out, no
need to carry on it any more.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sport->port.irq is unsigned, check for <0 doesn't make sense.
Explicitly cast it to int to check for error.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The -rt patches change the console_semaphore to console_mutex.  As a
result, a quite large chunk of the patches changes all
acquire/release_console_sem() to acquire/release_console_mutex()

This commit makes things use more neutral function names which dont make
implications about the underlying lock.

The only real change is the return value of console_trylock which is
inverted from try_acquire_console_sem()

This patch also paves the way to switching console_sem from a semaphore to
a mutex.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert]
Signed-off-by: NTorben Hohn <torbenh@gmx.de>
Cc: Thomas Gleixner <tglx@tglx.de>
Cc: Greg KH <gregkh@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix build errors by selecting SERIAL_CORE:

ERROR: "uart_register_driver" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_write_wakeup" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_update_timeout" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_get_divisor" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_get_baud_rate" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_add_one_port" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_unregister_driver" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_remove_one_port" [drivers/tty/serial/apbuart.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Unbreak Billionton CF bluetooth card. This actually fixes a regression
on zaurus.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>