The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call.  Each place that does this has a different set
of sanity checks it performs.  Some check only the signature.  A couple
validate the block number (the block read vs di->i_blkno).  A couple
others check for VALID_FL.  Only one place validates i_fs_generation.  A
couple check nothing.  Even when an error is found, they don't all do
the same thing.

We wrap inode reading into ocfs2_read_inode_block().  This will validate
all the above fields, going readonly if they are invalid (they never
should be).  ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags.  Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.

We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Patch sets journal descriptor to NULL after the journal is shutdown.
This ensures that jbd2_journal_release_jbd_inode(), which removes the
jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode()
even after the journal has been shutdown.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

ocfs2_read_blocks() currently requires the CACHED flag for cached I/O.
However, that's the common case.  Let's flip it around and provide an
IGNORE_CACHE flag for the special users.  This has the added benefit of
cleaning up the code some (ignore_cache takes on its special meaning
earlier in the loop).
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED.
Only six pass a different flag set.  Rather than have every caller care,
let's make ocfs2_read_block() take no flags and always do a cached read.
The remaining six places can call ocfs2_read_blocks() directly.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Now that synchronous readers are using ocfs2_read_blocks_sync(), all
callers of ocfs2_read_blocks() are passing an inode.  Use it
unconditionally.  Since it's there, we don't need to pass the
ocfs2_super either.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The ocfs2_read_blocks() function currently handles sync reads, cached,
reads, and sometimes cached reads.  We're going to add some
functionality to it, so first we should simplify it.  The uncached,
synchronous reads are much easer to handle as a separate function, so we
instroduce ocfs2_read_blocks_sync().
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This is pointless as brelse() already does the check.

Signed-off-by: Mark Fasheh

ocfs2 wants JBD2 for many reasons, not the least of which is that JBD is
limiting our maximum filesystem size.

It's a pretty trivial change.  Most functions are just renamed.  The
only functional change is moving to Jan's inode-based ordered data mode.
It's better, too.

Because JBD2 reads and writes JBD journals, this is compatible with any
existing filesystem.  It can even interact with JBD-based ocfs2 as long
as the journal is formated for JBD.

We provide a compatibility option so that paranoid people can still use
JBD for the time being.  This will go away shortly.

[ Moved call of ocfs2_begin_ordered_truncate() from ocfs2_delete_inode() to
  ocfs2_truncate_for_delete(). --Mark ]
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This fixes a bug introduced with 539d8264:
    [PATCH 2/2] ocfs2: Fix race between mount and recovery

ocfs2_mark_dead_nodes() was reading journal inodes while holding the
spinlock protecting our in-memory recovery state. The fix is very simple -
the disk state is protected by a cluster lock that's already held, so we
just move the spinlock down past the read.
Reviewed-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

As the fs recovery is asynchronous, there is a small chance that another
node can mount (and thus recover) the slot before the recovery thread
gets to it.

If this happens, the recovery thread will block indefinitely on the
journal/slot lock as that lock will be held for the duration of the mount
(by design) by the node assigned to that slot.

The solution implemented is to keep track of the journal replays using
a recovery generation in the journal inode, which will be incremented by the
thread replaying that journal. The recovery thread, before attempting the
blocking lock on the journal/slot lock, will compare the generation on disk
with what it has cached and skip recovery if it does not match.

This bug appears to have been inadvertently introduced during the mount/umount
vote removal by mainline commit 34d024f8. In the
mount voting scheme, the messaging would indirectly indicate that the slot
was being recovered.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

A couple places use OCFS2_DEBUG_FS where they really mean
CONFIG_OCFS2_DEBUG_FS.
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ disable unlikely @ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)

@@ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The in-memory slot map uses the same magic as the on-disk one.  There is
a special value to mark a slot as invalid.  It relies on the size of
certain types and so on.

Write a new in-memory map that keeps validity as a separate field.  Outside
of the I/O functions, OCFS2_INVALID_SLOT now means what it is supposed to.
It also is no longer tied to the type size.

This also means that only the I/O functions refer to 16bit quantities.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The old recovery map was a bitmap of node numbers.  This was sufficient
for the maximum node number of 254.  Going forward, we want node numbers
to be UINT32.  Thus, we need a new recovery map.

Note that we can't keep track of slots here.  We must write down the
node number to recovery *before* we get the locks needed to convert a
node number into a slot number.

The recovery map is now an array of unsigned ints, max_slots in size.
It moves to journal.c with the rest of recovery.

Because it needs to be initialized, we move all of recovery initialization
into a new function, ocfs2_recovery_init().  This actually cleans up
ocfs2_initialize_super() a little as well.  Following on, recovery cleaup
becomes part of ocfs2_recovery_exit().

A number of node map functions are rendered obsolete and are removed.

Finally, waiting on recovery is wrapped in a function rather than naked
checks on the recovery_event.  This is a cleanup from Mark.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Just use osb_lock around the ocfs2_slot_info data.  This allows us to
take the ocfs2_slot_info structure private in slot_info.c.  All access
is now via accessors.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

journal.c and dlmglue.c would refresh the slot map by hand.  Instead, have
the update and clear functions do the work inside slot_map.c.  The eventual
result is to make ocfs2_slot_info defined privately in slot_map.c
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Create separate lockdep lock classes for system file's i_mutexes. They are
used to guard allocations and similar things and thus rank differently
than i_mutex of a regular file or directory.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Mostly taken from ext3. This allows the user to set the jbd commit interval,
in seconds. The default of 5 seconds stays the same, but now users can
easily increase the commit interval. Typically, this would be increased in
order to benefit performance at the expense of data-safety.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Call this the "inode_lock" now, since it covers both data and meta data.
This patch makes no functional changes.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The node maps that are set/unset by these votes are no longer relevant, thus
we can remove the mount and umount votes. Since those are the last two
remaining votes, we can also remove the entire vote infrastructure.

The vote thread has been renamed to the downconvert thread, and the small
amount of functionality related to managing it has been moved into
fs/ocfs2/dlmglue.c. All references to votes have been removed or updated.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

ocfs2_extend_trans() might call journal_restart() which will commit dirty
buffers and then restart the transaction. This means that any buffers which
still need changes should be passed to journal_access() again. Some paths
during extend weren't doing this right.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The nastiest cases of transaction extends are also the rarest. We can expose
them more quickly at the expense of performance by going straight to the
journal_restart() in ocfs2_extend_trans(). Wrap things in OCFS2_DEBUG_FS so
that we only do this when "expensive debugging" is turned on.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

We're holding the cluster lock when a failure might happen in
ocfs2_dir_foreach() so it needs to be released.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

ocfs2_queue_orphans() has an open coded readdir loop which can easily just
use a directory accessor function.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: NJoel Becker <joel.becker@oracle.com>

The code for adding, removing, deleting directory entries was splattered all
over namei.c. I'd rather have this all centralized, so that it's easier to
make changes for inline dir data, and eventually indexed directories.

None of the code in any of the functions was changed. I only removed the
static keyword from some prototypes so that they could be exported.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: NJoel Becker <joel.becker@oracle.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

None of these are actually harmful, but the noise makes looking for real
problems difficult.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Older file systems which didn't support holes did a dumb calculation of
i_blocks based on i_size. This is no longer accurate, so fix things up to
take actual allocation into account.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Initially, we had wired things to return a size '1' of holes. Cook up a
small amount of code to find the next extent and calculate the number of
clusters between the virtual offset and the next allocated extent.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Return an optional extent flags field from our lookup functions and wire up
callers to treat unwritten regions as holes for the purpose of returning
zeros to the user.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The code in extent_map.c is not prepared to deal with a subtree being
rotated between lookups. This can happen when filling holes in sparse files.
Instead of a lengthy patch to update the code (which would likely lose the
benefit of caching subtree roots), we remove most of the algorithms and
implement a simple path based lookup. A less ambitious extent caching scheme
will be added in a later patch.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Ocfs2 currently does cluster-wide node messaging to check the open state of
an inode during delete. This patch removes that mechanism in favor of an
inode cluster lock which is taken at shared read when an inode is first read
and dropped in clear_inode(). This allows a deleting node to test the
liveness of an inode by attempting to take an exclusive lock.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This allows users to format an ocfs2 file system with a special flag,
OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT. When the file system sees this flag, it
will not use any cluster services, nor will it require a cluster
configuration, thus acting like a 'local' file system.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This is mostly a search and replace as ocfs2_journal_handle is now no more
than a container for a handle_t pointer.

ocfs2_commit_trans() becomes very straight forward, and we remove some out
of date comments / code.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

All callers either pass in NULL directly, or a local variable that is
already set to NULL.

The internals of ocfs2_start_trans() get a nice cleanup as a result.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

It is no longer used.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This sets us up to remove handle->journal.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Now that this is unused and all callers pass NULL, we can safely remove it.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This is no longer used outside of journal.c
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This gets us rid of a slab we no longer need, as well as removing the
majority of what's left on ocfs2_journal_handle.

ocfs2_commit_unstarted_handle() has no more real work to do, so remove that
function too.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>