Control Midlevel
Add const prefix to snd_kcontrol_new_t pointer for better protection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver,HDA Intel driver
Merged the work of pshou <pshou@realtek.com.tw> for the support of
more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack,
and ALC260 HP.  Tests with the real hardwares are appreciated.

The codec patch is cleaned up:  The preset configuration of codecs are
stored in the table and copied to the spec instance.

Added/fixed comments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Allow sub_device=0 in board config check.  This means that every device
with the given sub vendor ID will match.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Clean up and fix ALC-codec support code.

The last addition of bound volume is fixed now to handle correctly
the bound 'mute switches'.  The analog loopback should work better.
The init verbs are fixed together with this change.

The numbers are replaced with macros for better readability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Feed front signals to all surround channels if no data is given
for surround channels.

It seems that CLFE works as expected (only center outputs) even if
connected from the front line - at least on my test system.
If this change causes problems on other system (e.g. only the left
channel is transferred to the center channel), please let me know...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
Print all AMP IN values when multiple nodes are connected.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Trident driver
Disable MPU401 support on SIS7018 since it results in kernel freeze.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix the analog loopback volumes of ALC codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix the PCM mixer switch for AD1986a (it was a typo).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fixed the handling of amp cache in hda-codec driver.
The confliction of cache values with different indices should be fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VIA82xx driver
As the original reporter noted, the NO_VRA must be used for loud volumes.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Documentation
Added documentation for HDSP MADI driver by Winfried Ritsch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDSPM driver,PCI drivers,RME9652 driver
Added RME Hammerfall DSP MADI driver by Winfried Ritsch.
(Moved from alsa-driver tree to mainline.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CS4236+ driver
Background: The card/chipset supports an external MIDI interrupt.  By
default, this interrupt isn't used (because the isapnp mechanism chooses a
configuration without an assigned interrupt).  If the user wishes to
explicitly select an interrupt via the mpu_irq parameter for such a
configured device, it doesn't work: The driver always shows:

isapnp MPU: port=0x330, irq=-1

(note the 'irq=-1')

Problem: The driver only allows to set the irq if pnp_irq_valid returns
true for this particular pnp device.  This, however, is only true if an
interrupt has already been assigned (pnp_valid_irq returns true if the flag
IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set).  If no interrupt
has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns
false, thereby inhibiting the selection of a valid irq.

Solution: Don't check for a valid (= already assigned) irq at the point of
calling pnp_resource_change.

Tested successfully on Linux 2.6.11.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

ALSA<-OSS emulation
The problem was negative/wrong result (info.bytes) in a specific condition at
playback startup.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Intel8x0 driver
Added ac97_quirk for FSC T3010.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA<-OSS emulation
The problem was negative result (info.bytes) in a specific condition at
playback startup.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

PCM Midlevel
Fix semaphore races between PCM drain and other ops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Intel driver
Fixed Oops in the error path from probe function of snd-hda-intel driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,Memalloc module,RME HDSP driver,RME9652 driver
Add the write support to snd-page-alloc proc file for buffer pre-allocation.
Removed the pre-allocation codes via module options.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core
I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver
Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y
Checking a pointer for NULL before calling kfree() on it is redundant,
kfree() deals with NULL pointers just fine.
This patch removes such checks from sound/

This patch also makes another, but closely related, change.
It avoids casting pointers about to be kfree()'ed.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel8x0 driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

AC97 Codec,ATIIXP driver,VIA82xx driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

VIA82xx driver
- 0x1071, 0x8399 == VIA_DXS_ENABLE
- Umax AB 595T (VIA K8N800A - VT8237)
- reporter: Honza Machacek <Hloupy.Honza@centrum.cz>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

ALI5451 driver
This patch adds modem support for ali5451. Since it is same pci device
all is done in ali5451.c.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

CA0106 driver
Use the DMA_32BIT_MASK constant from dma-mapping.h
when calling pci_set_dma_mask() or pci_set_consistent_dma_mask()
See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

ATIIXP-modem driver,Intel8x0-modem driver,VIA82xx-modem driver
Modem drivers (atiixp-modem, intel8x0m, via82xx-modem) migration
for using MC97 generic modem mixer for off-hook operation.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Simple MC97 modem mixer with two common controls: Off-hook and CID,
and Si3056 MC specific control: Modem Speaker.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Notes: This adds a new mixer item to switch between Mic and Line-in.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Notes: MIC capture not tested yet.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

This patch removes some unneeded checks of pointers being NULL before
calling kfree() on them.  kfree() handles NULL pointers just fine, checking
first is pointless.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Due to the use of write-behind, it is possible for md to write a page to
the bitmap file that is still completing writeback.  This is not allowed.

With this patch, we detect those cases and either force a sync write, or
back off and try later, as appropriate.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1/ Must typecast int to (sector_t) before inverting or we
 might not invert enough bits.

2/ When "bitmap_offset" was added to mdp_superblock_1, we didn't increase
   the count of words-used (96 to 100).
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

currently, md updates all superblocks (one on each device) in series.  It
waits for one write to complete before starting the next.  This isn't a big
problem as superblock updates don't happen that often.

However it is neater to do it in parallel, and if the drives in the array have
gone to "sleep" after a period of idleness, then waking them is parallel is
faster (and someone else should be worrying about power drain).

Futher, we will need parallel superblock updates for a future patch which
keeps the intent-logging bitmap near the superblock.

Also remove the silly code that retired superblock updates 100 times.  This
simply never made sense.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This provides an alternate to storing the bitmap in a separate file.  The
bitmap can be stored at a given offset from the superblock.  Obviously the
creator of the array must make sure this doesn't intersect with data....
After is good for version-0.90 superblocks.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>