These routines provide the device driver support for the AMD
Cryptographic Coprocessor (CCP).
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain
function to chain two scatterlists, but the chain pointer indication
bit is not set.  When the resulting scatterlist is used, for example,
by sg_nents to count the number of scatterlist entries, a segfault occurs
because sg_nents does not follow the chain pointer to the chained scatterlist.

Update scatterwalk_sg_chain to set the chain pointer indication bit as is
done by the sg_chain function.

Cc: stable@vger.kernel.org
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

I don't know what went wrong, mis-merge or something, but ->pmd_huge_pte
placed in wrong union within struct page.

In original patch[1] it's placed to union with ->lru and ->slab, but in
commit e009bb30 ("mm: implement split page table lock for PMD
level") it's in union with ->index and ->freelist.

That union seems also unused for pages with table tables and safe to
re-use, but it's not what I've tested.

Let's move it to original place.  It fixes indentation at least.  :)

[1] https://lkml.org/lkml/2013/10/7/288Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7cb2ef56 ("mm: fix aio performance regression for database
caused by THP") can cause dereference of a dangling pointer if
split_huge_page runs during PageHuge() if there are updates to the
tail_page->private field.

Also it is repeating compound_head twice for hugetlbfs and it is running
compound_head+compound_trans_head for THP when a single one is needed in
both cases.

The new code within the PageSlab() check doesn't need to verify that the
THP page size is never bigger than the smallest hugetlbfs page size, to
avoid memory corruption.

A longstanding theoretical race condition was found while fixing the
above (see the change right after the skip_unlock label, that is
relevant for the compound_lock path too).

By re-establishing the _mapcount tail refcounting for all compound
pages, this also fixes the below problem:

  echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

  BUG: Bad page state in process bash  pfn:59a01
  page:ffffea000139b038 count:0 mapcount:10 mapping:          (null) index:0x0
  page flags: 0x1c00000000008000(tail)
  Modules linked in:
  CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x55/0x76
    bad_page+0xd5/0x130
    free_pages_prepare+0x213/0x280
    __free_pages+0x36/0x80
    update_and_free_page+0xc1/0xd0
    free_pool_huge_page+0xc2/0xe0
    set_max_huge_pages.part.58+0x14c/0x220
    nr_hugepages_store_common.isra.60+0xd0/0xf0
    nr_hugepages_store+0x13/0x20
    kobj_attr_store+0xf/0x20
    sysfs_write_file+0x189/0x1e0
    vfs_write+0xc5/0x1f0
    SyS_write+0x55/0xb0
    system_call_fastpath+0x16/0x1b
Signed-off-by: NKhalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Tested-by: NKhalid Aziz <khalid.aziz@oracle.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now, the migration code in migrate_page_copy() uses copy_huge_page()
for hugetlbfs and thp pages:

       if (PageHuge(page) || PageTransHuge(page))
                copy_huge_page(newpage, page);

So, yay for code reuse.  But:

  void copy_huge_page(struct page *dst, struct page *src)
  {
        struct hstate *h = page_hstate(src);

and a non-hugetlbfs page has no page_hstate().  This works 99% of the
time because page_hstate() determines the hstate from the page order
alone.  Since the page order of a THP page matches the default hugetlbfs
page order, it works.

But, if you change the default huge page size on the boot command-line
(say default_hugepagesz=1G), then we might not even *have* a 2MB hstate
so page_hstate() returns null and copy_huge_page() oopses pretty fast
since copy_huge_page() dereferences the hstate:

  void copy_huge_page(struct page *dst, struct page *src)
  {
        struct hstate *h = page_hstate(src);
        if (unlikely(pages_per_huge_page(h) > MAX_ORDER_NR_PAGES)) {
  ...

Mel noticed that the migration code is really the only user of these
functions.  This moves all the copy code over to migrate.c and makes
copy_huge_page() work for THP by checking for it explicitly.

I believe the bug was introduced in commit b32967ff ("mm: numa: Add
THP migration for the NUMA working set scanning fault case")

[akpm@linux-foundation.org: fix coding-style and comment text, per Naoya Horiguchi]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix another really stupid bug - I introduced genl_set_err()
precisely to be able to adjust the group and reject invalid
ones, but then forgot to do so.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unfortunately, I introduced a tremendously stupid bug into
genlmsg_multicast() when doing all those multicast group
changes: it adjusts the group number, but then passes it
to genlmsg_multicast_netns() which does that again.

Somehow, my tests failed to catch this, so add a warning
into genlmsg_multicast_netns() and remove the offending
group ID adjustment.

Also add a warning to the similar code in other functions
so people who misuse them are more loudly warned.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add auto-MDI/MDI-X capability for forced (autonegotiation disabled)
10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static
function genphy_setup_forced() required by the new config_aneg handler
in the Vitesse PHY module.
Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: NShruti Kanetkar <Shruti@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller <davem@davemloft.net>
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Doing an if statement to test some condition to know if we should
trigger a tracepoint is pointless when tracing is disabled. This just
adds overhead and wastes a branch prediction. This is why the
TRACE_EVENT_CONDITION() was created. It places the check inside the jump
label so that the branch does not happen unless tracing is enabled.

That is, instead of doing:

	if (em)
		trace_btrfs_get_extent(root, em);

Which is basically this:

	if (em)
		if (static_key(trace_btrfs_get_extent)) {

Using a TRACE_EVENT_CONDITION() we can just do:

	trace_btrfs_get_extent(root, em);

And the condition trace event will do:

	if (static_key(trace_btrfs_get_extent)) {
		if (em) {
			...

The static key is a non conditional jump (or nop) that is faster than
having to check if em is NULL or not.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This reverts commit ea1e7ed3.

Al points out that while the commit *does* actually create a separate
slab for the page->ptl allocation, that slab is never actually used, and
the code continues to use kmalloc/kfree.

Damien Wyart points out that the original patch did have the conversion
to use kmem_cache_alloc/free, so it got lost somewhere on its way to me.

Revert the half-arsed attempt that didn't do anything.  If we really do
want the special slab (remember: this is all relevant just for debug
builds, so it's not necessarily all that critical) we might as well redo
the patch fully.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Kirill A Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The supported ALUA states might be different for individual
devices, so store it in a separate field.

(nab: Remove unnecessary line continuation)
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Addresses
"[BUG] completely bonkers use of set_need_resched + VM_FAULT_NOPAGE".

In the first occurence it was used to try to be nice while releasing the
mmap_sem and retrying the fault to work around a locking inversion.
The second occurence was never used.

There has been some discussion whether we should change the locking order to
mmap_sem -> bo_reserve. This patch doesn't address that issue, and leaves
that locking order undefined. The solution that we release the mmap_sem if
tryreserve fails and wait for the buffer to become unreserved is something
we want in any case, and follows how the core vm system waits for pages
to be come unlocked while releasing the mmap_sem.

The code also outlines what needs to be changed if we want to establish the
locking order as mmap_sem -> bo::reserve.

One slight issue that remains with this code is that the fault handler might
be prone to starvation if another thread countinously reserves the buffer.
IMO that usage pattern is highly unlikely.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a static inline to generic netlink to wrap netlink_set_err()
to make it easier to use here - use it in openvswitch (the only
generic netlink user of netlink_set_err()).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's no reason to have the family pointer there since it
can just be passed internally where needed, so remove it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no users of this API remaining, and we'll soon
change group registration to be static (like ops are now)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The quota code is abusing the genetlink API and is using
its family ID as the multicast group ID, which is invalid
and may belong to somebody else (and likely will.)

Make the quota code use the correct API, but since this
is already used as-is by userspace, reserve a family ID
for this code and also reserve that group ID to not break
userspace assumptions.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If disk stats are enabled on the queue, a request needs to
be marked with REQ_IO_STAT for accounting to be active on
that request. This fixes an issue with virtio-blk not
showing up in /proc/diskstats after the conversion to
blk-mq.

Add QUEUE_FLAG_MQ_DEFAULT, setting stats and same cpu-group
completion on by default.
Reported-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

linux/raid/md_p.h is using conditionals depending on endianess and fails
with an error if neither of __BIG_ENDIAN, __LITTLE_ENDIAN or
__BYTE_ORDER are defined, but it doesn't include any header which can
define these constants. This make this header unusable alone.

This patch adds a #include <asm/byteorder.h> at the beginning of this
header to make it usable alone. This is needed to compile klibc on MIPS.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NNeilBrown <neilb@suse.de>

This is required to properly calculate the tiling parameters
in userspace.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

If no reservation ticket is given to the execbuf reservation utilities,
try reservation with non-blocking semantics.
This is intended for eviction paths that use the execbuf reservation
utilities for convenience rather than for deadlock avoidance.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

This commit reverts commit 7afbddfa ("IB/core: Temporarily disable
create_flow/destroy_flow uverbs").  Since the uverbs extensions
functionality was experimental for v3.12, this patch re-enables the
support for them and flow-steering for v3.13.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 400dbc96 ("IB/core: Infrastructure for extensible uverbs
commands") added an infrastructure for extensible uverbs commands
while later commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow
through uverbs") exported ib_create_flow()/ib_destroy_flow() functions
using this new infrastructure.

According to the commit 400dbc96, the purpose of this
infrastructure is to support passing around provider (eg. hardware)
specific buffers when userspace issue commands to the kernel, so that
it would be possible to extend uverbs (eg. core) buffers independently
from the provider buffers.

But the new kernel command function prototypes were not modified to
take advantage of this extension. This issue was exposed by Roland
Dreier in a previous review[1].

So the following patch is an attempt to a revised extensible command
infrastructure.

This improved extensible command infrastructure distinguish between
core (eg. legacy)'s command/response buffers from provider
(eg. hardware)'s command/response buffers: each extended command
implementing function is given a struct ib_udata to hold core
(eg. uverbs) input and output buffers, and another struct ib_udata to
hold the hw (eg. provider) input and output buffers.

Having those buffers identified separately make it easier to increase
one buffer to support extension without having to add some code to
guess the exact size of each command/response parts: This should make
the extended functions more reliable.

Additionally, instead of relying on command identifier being greater
than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on
unused bits in command field: on the 32 bits provided by command
field, only 6 bits are really needed to encode the identifier of
commands currently supported by the kernel. (Even using only 6 bits
leaves room for about 23 new commands).

So this patch makes use of some high order bits in command field to
store flags, leaving enough room for more command identifiers than one
will ever need (eg. 256).

The new flags are used to specify if the command should be processed
as an extended one or a legacy one. While designing the new command
format, care was taken to make usage of flags itself extensible.

Using high order bits of the commands field ensure that newer
libibverbs on older kernel will properly fail when trying to call
extended commands. On the other hand, older libibverbs on newer kernel
will never be able to issue calls to extended commands.

The extended command header includes the optional response pointer so
that output buffer length and output buffer pointer are located
together in the command, allowing proper parameters checking. This
should make implementing functions easier and safer.

Additionally the extended header ensure 64bits alignment, while making
all sizes multiple of 8 bytes, extending the maximum buffer size:

                             legacy      extended

   Maximum command buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)
  Maximum response buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)

For the purpose of doing proper buffer size accounting, the headers
size are no more taken in account in "in_words".

One of the odds of the current extensible infrastructure, reading
twice the "legacy" command header, is fixed by removing the "legacy"
command header from the extended command header: they are processed as
two different parts of the command: memory is read once and
information are not duplicated: it's making clear that's an extended
command scheme and not a different command scheme.

The proposed scheme will format input (command) and output (response)
buffers this way:

- command:

  legacy header +
  extended header +
  command data (core + hw):

    +----------------------------------------+
    | flags     |   00      00    |  command |
    |        in_words    |   out_words       |
    +----------------------------------------+
    |                 response               |
    |                 response               |
    | provider_in_words | provider_out_words |
    |                 padding                |
    +----------------------------------------+
    |                                        |
    .              <uverbs input>            .
    .              (in_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .             <provider input>           .
    .          (provider_in_words * 8)       .
    |                                        |
    +----------------------------------------+

- response, if present:

    +----------------------------------------+
    |                                        |
    .          <uverbs output space>         .
    .             (out_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .         <provider output space>        .
    .         (provider_out_words * 8)       .
    |                                        |
    +----------------------------------------+

The overall design is to ensure that the extensible infrastructure is
itself extensible while begin more reliable with more input and bound
checking.

Note:

The unused field in the extended header would be perfect candidate to
hold the command "comp_mask" (eg. bit field used to handle
compatibility).  This was suggested by Roland Dreier in a previous
review[2].  But "comp_mask" field is likely to be present in the uverb
input and/or provider input, likewise for the response, as noted by
Matan Barak[3], so it doesn't make sense to put "comp_mask" in the
header.

[1]:
http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com

[2]:
http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com

[3]:
http://marc.info/?i=525C1149.6000701@mellanox.comSigned-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com

[ Convert "ret ? ret : 0" to the equivalent "ret".  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The structure holding any types of flow_spec is of no use to
userspace.  It would be wrong for userspace to do:

  struct ib_uverbs_flow_spec flow_spec;

  flow_spec.type = IB_FLOW_SPEC_TCP;
  flow_spec.size = sizeof(flow_spec);

Instead, userspace should use the dedicated flow_spec structure for
  - Ethernet : struct ib_uverbs_flow_spec_eth,
  - IPv4     : struct ib_uverbs_flow_spec_ipv4,
  - TCP/UDP  : struct ib_uverbs_flow_spec_tcp_udp.

In other words, struct ib_uverbs_flow_spec is a "virtual" data
structure that can only be use by the kernel as an alias to the other.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

A common header will allows better checking of flow specs size, while
ensuring strict alignment to 64 bits.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

This patch adds "flow" prefix to most of data structure added as part
of commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through
uverbs") to keep those names in sync with the data structures added in
commit 319a441d ("IB/core: Add receive flow steering support").

It's just a matter of translating 'ib_flow' to 'ib_uverbs_flow'.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

Commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through
uverbs") added public data structures to support receive flow
steering.  The new structs are not following the 'uverbs' pattern:
they're lacking the common prefix 'ib_uverbs'.

This patch replaces ib_kern prefix by ib_uverbs.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

This patch fixes the following issues:

1. Unneeded checks were removed

2. Removed the fixed size out of flow_attr.size, thus simplifying the checks.

3. Remove a 32bit hole on 64bit systems with strict alignment in
   struct ib_kern_flow_att by adding a reserved field.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Rename simple_delete_dentry() to always_delete_dentry() and export it.
Export simple_dentry_operations, while we are at it, and get rid of
their duplicates
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently pskb_trim_rcsum() just balks on CHECKSUM_COMPLETE packets
and remarks them as CHECKSUM_NONE, forcing a software checksum
validation later.

We have all of the mechanics available to fixup the skb->csum value,
even for complicated fragmented packets, via the helpers
skb_checksum() and csum_sub().

So just use them.

Based upon a suggestion by Herbert Xu.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For performance reasons, sch_fq tried hard to not setup timers for every
sent packet, using a quantum based heuristic : A delay is setup only if
the flow exhausted its credit.

Problem is that application limited flows can refill their credit
for every queued packet, and they can evade pacing.

This problem can also be triggered when TCP flows use small MSS values,
as TSO auto sizing builds packets that are smaller than the default fq
quantum (3028 bytes)

This patch adds a 40 ms delay to guard flow credit refill.

Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 7eec4174 ("pkt_sched: fq: fix non TCP flows pacing")
obsoleted TCA_FQ_FLOW_DEFAULT_RATE without notice for the users.

Suggested by David Miller
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the ops assignment is just two variables rather than a
long list iteration etc., there's no reason to separately export
__genl_register_family() and __genl_register_family_with_ops().

Unify the two functions into __genl_register_family() and make
genl_register_family_with_ops() call it after assigning the ops.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce helper function macvlan_dev_real_dev which returns the
underlying device of a macvlan device, similar to vlan_dev_real_dev()
for 802.1q VLAN devices.

v2: IFF_MACVLAN flag and equivalent of is_macvlan_dev() were
introduced in the meantime

v3: do BUG() if compiled without macvlan support
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>