The filesystem gains the USERSPACE_STACK incomat bit and the
s_cluster_info field on the superblock.  When a userspace stack is in
use, the name of the stack is stored on-disk for mount-time
verification.

The "cluster_stack" option is added to mount(2) processing.  The mount
process needs to pass the matching stack name.  If the passed name and
the on-disk name do not match, the mount is failed.

When using the classic o2cb stack, the incompat bit is *not* set and no
mount option is used other than the usual heartbeat=local.  Thus, the
filesystem is compatible with older tools.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Introduce a set of sysfs files that describe the current stack glue
state.  The files live under /sys/fs/ocfs2.  The locking_protocol file
displays the version of ocfs2's locking code.  The
loaded_cluster_plugins file displays all of the currently loaded stack
plugins.  When filesystems are mounted, the active_cluster_plugin file
will display the plugin in use.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

We define the ocfs2_stack_plugin structure to represent a stack driver.
The o2cb stack code is split into stack_o2cb.c.  This becomes the
ocfs2_stack_o2cb.ko module.

The stackglue generic functions are similarly split into the
ocfs2_stackglue.ko module.  This module now provides an interface to
register drivers.  The ocfs2_stack_o2cb driver registers itself.  As
part of this interface, ocfs2_stackglue can load drivers on demand.
This is accomplished in ocfs2_cluster_connect().

ocfs2_cluster_disconnect() is now notified when a _hangup() is pending.
If a hangup is pending, it will not release the driver module and will
let _hangup() do that.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Define the ocfs2_stack_operations structure.  Build o2cb_stack_ops from
all of the o2cb-specific stack functions.  Change the generic stack glue
functions to call the stack_ops instead of the o2cb functions directly.

The o2cb functions are moved to stack_o2cb.c.  The headers are cleaned up
to where only needed headers are included.

In this code, stackglue.c and stack_o2cb.c refer to some shared
extern variables.  When they become modules, that will change.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Split off the o2cb-specific funtionality from the generic stack glue
calls.  This is a precurser to wrapping the o2cb functionality in an
operations vector.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The stack glue initialization function needs a better name so that it can be
used cleanly when stackglue becomes a module.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

dlmglue.c was still referencing a raw o2dlm lksb in one instance.  Let's
create a generic ocfs2_dlm_dump_lksb() function.  This allows underlying
DLMs to print whatever they want about their lock.

We then move the o2dlm dump into stackglue.c where it belongs.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

When using fsdlm, -EAGAIN is returned in the async callback for NOQUEUE
requests. Fix up dlmglue to expect this.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

o2dlm has the non-standard behavior of providing a cancel callback
(unlock_ast) even when the cancel has failed (the locking operation
succeeded without canceling).  This is called CANCELGRANT after the
status code sent to the callback.  fs/dlm does not provide this
callback, so dlmglue must be changed to live without it.
o2dlm_unlock_ast_wrapper() in stackglue now ignores CANCELGRANT calls.

Because dlmglue no longer sees CANCELGRANT, ocfs2_unlock_ast() no longer
needs to check for it.  ocfs2_locking_ast() must catch that a cancel was
tried and clear the cancel state.

Making these changes opens up a locking race.  dlmglue uses the the
OCFS2_LOCK_BUSY flag to ensure only one thread is calling the dlm at any
one time.  But dlmglue must unlock the lockres before calling into the
dlm.  In the small window of time between unlocking the lockres and
calling the dlm, the downconvert thread can try to cancel the lock.  The
downconvert thread is checking the OCFS2_LOCK_BUSY flag - it doesn't
know that ocfs2_dlm_lock() has not yet been called.

Because ocfs2_dlm_lock() has not yet been called, the cancel operation
will just be a no-op.  There's nothing to cancel.  With CANCELGRANT,
dlmglue uses the CANCELGRANT callback to clear up the cancel state.
When it comes around again, it will retry the cancel.  Eventually, the
first thread will have called into ocfs2_dlm_lock(), and either the
lock or the cancel will succeed.  The downconvert thread can then do its
downconvert.

Without CANCELGRANT, there is nothing to clean up the cancellation
state.  The downconvert thread does not know to retry its operations.
More importantly, the original lock may be blocking on the other node
that is trying to cancel us.  With neither able to make progress, the
ast is never called and the cancellation state is never cleaned up that
way.  dlmglue is deadlocked.

The OCFS2_LOCK_PENDING flag is introduced to remedy this window.  It is
set at the same time OCFS2_LOCK_BUSY is.  Thus, the downconvert thread
can check whether the lock is cancelable.  If not, it just loops around
to try again.  Once ocfs2_dlm_lock() is called, the thread then clears
OCFS2_LOCK_PENDING and wakes the downconvert thread.  Now, if the
downconvert thread finds the lock BUSY, it can safely try to cancel it.
Whether the cancel works or not, the state will be properly set and the
lock processing can continue.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

It doesn't make sense to query for a node number before connecting to the
cluster stack. This should be safe to do because node_num is only just
printed,
and we're actually only moving the setting of node num a small amount
further in the mount process.

[ Disconnect when node query fails -- Joel ]
Reviewed-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The last bit of classic stack used directly in ocfs2 code is o2hb.
Specifically, the check for heartbeat during mount and the call to
ocfs2_hb_ctl during unmount.

We create an extra API, ocfs2_cluster_hangup(), to encapsulate the call
to ocfs2_hb_ctl.  Other stacks will just leave hangup() empty.

The check for heartbeat is moved into ocfs2_cluster_connect().  It will
be matched by a similar check for other stacks.

With this change, only stackglue.c includes cluster/ headers.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

ocfs2 asks the cluster stack for the local node's node number for two
reasons; to fill the slot map and to print it. While the slot map isn't
necessary for userspace cluster stacks, the printing is very nice for
debugging. Thus we add ocfs2_cluster_this_node() as a generic API to get
this value. It is anticipated that the slot map will not be used under a
userspace cluster stack, so validity checks of the node num only need to
exist in the slot map code. Otherwise, it just gets used and printed as an
opaque value.

[ Fixed up some "int" versus "unsigned int" issues and made osb->node_num
  truly opaque. --Mark ]
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This step introduces a cluster stack agnostic API for initializing and
exiting.  fs/ocfs2/dlmglue.c no longer uses o2cb/o2dlm knowledge to
connect to the stack.  It is all handled in stackglue.c.

heartbeat.c no longer needs to know how it gets called.
ocfs2_do_node_down() is now a clean recovery trigger.

The big gotcha is the ordering of initializations and de-initializations done
underneath ocfs2_cluster_connect().  ocfs2_dlm_init() used to do all
o2dlm initialization in one block.  Thus, the o2dlm functionality of
ocfs2_cluster_connect() is very straightforward.  ocfs2_dlm_shutdown(),
however, did a few things between de-registration of the eviction
callback and actually shutting down the domain.  Now de-registration and
shutdown of the domain are wrapped within the single
ocfs2_cluster_disconnect() call.  I've checked the code paths to make
sure we can safely tear down things in ocfs2_dlm_shutdown() before
calling ocfs2_cluster_disconnect().  The filesystem has already set
itself to ignore the callback.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Wrap the lock status block (lksb) in a union.  Later we will add a union
element for the fs/dlm lksb.  Create accessors for the status and lvb
fields.

Other than a debugging function, dlmglue.c does not directly reference
the o2dlm locking path anymore.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Change the ocfs2_dlm_lock/unlock() functions to return -errno values.
This is the first step towards elminiating dlm_status in
fs/ocfs2/dlmglue.c.  The change also passes -errno values to
->unlock_ast().

[ Fix a return code in dlmglue.c and change the error translation table into
  an array of ints. --Mark ]
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The ocfs2 generic code should use the values in <linux/dlmconstants.h>.
stackglue.c will convert them to o2dlm values.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This is the first in a series of patches to isolate ocfs2 from the
underlying cluster stack. Here we wrap the dlm locking functions with
ocfs2-specific calls. Because ocfs2 always uses the same dlm lock status
callbacks, we can eliminate the callbacks from the filesystem visible
functions.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The old slot map had a few limitations:

- It was limited to one block, so the maximum slot count was 255.
- Each slot was signed 16bits, limiting node numbers to INT16_MAX.
- An empty slot was marked by the magic 0xFFFF (-1).

The new slot map format provides 32bit node numbers (UINT32_MAX), a
separate space to mark a slot in use, and extra room to grow.  The slot
map is now bounded by i_size, not a block.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The slot map file is merely an array of __le16.  Wrap it in a structure for
cleaner reference.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The in-memory slot map uses the same magic as the on-disk one.  There is
a special value to mark a slot as invalid.  It relies on the size of
certain types and so on.

Write a new in-memory map that keeps validity as a separate field.  Outside
of the I/O functions, OCFS2_INVALID_SLOT now means what it is supposed to.
It also is no longer tied to the type size.

This also means that only the I/O functions refer to 16bit quantities.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The slot map code assumed a slot_map file has one block allocated.
This changes the code to I/O as many blocks as will cover max_slots.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

The old recovery map was a bitmap of node numbers.  This was sufficient
for the maximum node number of 254.  Going forward, we want node numbers
to be UINT32.  Thus, we need a new recovery map.

Note that we can't keep track of slots here.  We must write down the
node number to recovery *before* we get the locks needed to convert a
node number into a slot number.

The recovery map is now an array of unsigned ints, max_slots in size.
It moves to journal.c with the rest of recovery.

Because it needs to be initialized, we move all of recovery initialization
into a new function, ocfs2_recovery_init().  This actually cleans up
ocfs2_initialize_super() a little as well.  Following on, recovery cleaup
becomes part of ocfs2_recovery_exit().

A number of node map functions are rendered obsolete and are removed.

Finally, waiting on recovery is wrapped in a function rather than naked
checks on the recovery_event.  This is a cleanup from Mark.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Just use osb_lock around the ocfs2_slot_info data.  This allows us to
take the ocfs2_slot_info structure private in slot_info.c.  All access
is now via accessors.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

journal.c and dlmglue.c would refresh the slot map by hand.  Instead, have
the update and clear functions do the work inside slot_map.c.  The eventual
result is to make ocfs2_slot_info defined privately in slot_map.c
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

In some situations, ocfs2_set_nn_state might get called with sc = NULL and
valid = 0. If sc = NULL, we can't dereference it to get the o2nm_node
member. Instead, do what o2net_initialize_handshake does and use NULL when
calling o2net_reconnect_delay and o2net_idle_timeout.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch addresses the bug in which the dlm_thread could go to sleep
while holding the dlm_spinlock.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Knowing the dlm recovery master helps in debugging recovery
issues. This patch prints a message on the recovery master node.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

dlm_master_request_handler() forgot to put a lockres when
dlm_assert_master_worker() failed or was skipped.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

During migration, the recovery master node may be asked to master a lockres
it may not know about. In that case, it would not only have to create a
lockres and add it to the hash, but also remember to to do the _put_
corresponding to the kref_init in dlm_init_lockres(), as soon as the migration
is completed. Yes, we don't wait for the dlm_purge_lockres() to do that
matching put. Note the ref added for it being in the hash protects the lockres
from being freed prematurely.

This patch adds that missing put, as described above, to plug a memleak.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Normally locks for remote nodes are freed when that node sends an UNLOCK
message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action
to do an extra put on the lock at the end.

However, there are times when the master node has to free the locks for the
remote nodes forcibly.

Two cases when this happens are:
1. When the master has migrated the lockres plus all locks to another node.
2. When the master is clearing all the locks of a dead node.

It was in the above two conditions that the dlm was missing the extra put.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

In ocfs2_group_add, 'cr' is a disk field of type 'ocfs2_chain_rec', and we
were putting cpu byteorder values into it. Swap things to the right endian
before storing.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

struct dlm_query_join_packet is made up of four one-byte fields.  They
are effectively in big-endian order already.  However, little-endian
machines swap them before putting the packet on the wire (because
query_join's response is a status, and that status is treated as a u32
on the wire).  Thus, a big-endian and little-endian machines will
treat this structure differently.

The solution is to have little-endian machines swap the structure when
converting from the structure to the u32 representation.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

__dlm_print_one_lock_resource must be called with spin_lock
the res->spinlock. While in some cases, we use it without this
precondition and lead to the failure of assert_spin_locked.
So call dlm_print_one_lock_resource instead.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

fs/ocfs2/dlm/dlmdomain.c: In function 'dlm_send_join_cancels':
fs/ocfs2/dlm/dlmdomain.c:983: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int'
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

In commit e6bafba5, a bug was fixed that
involved converting !x & y to !(x & y).  The code below shows the same
pattern, and thus should perhaps be fixed in the same way.

This is not tested and clearly changes the semantics, so it is only
something to consider.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch makes the needlessly global dlm_do_assert_master() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch makes the needlessly global ocfs2_downconvert_thread()
static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch contains the following cleanups that are now possible:
- make the following needlessly global functions static:
  - dlmglue.c:ocfs2_process_blocked_lock()
  - heartbeat.c:ocfs2_node_map_init()
- #if 0 the following unused global function plus support functions:
  - heartbeat.c:ocfs2_node_map_is_only()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
					expression_in_cpu_byteorder);
with:
	leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>