IMP will not handle and command queue message any more when it is
in core/global, driver should not send command queue message to
IMP until reinitialize the NIC HW.

This patch checks the status and avoid the message sent to IMP when
reset.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Default rss_hash_key value should be given to all vports. But just the
PF rss_hash_key has the default value here. This patch adds rss_hash_key
Initialization for all vports.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Third parameter of hnae_set_field is shift, But a mask is given. This
patch fixes it by replacing HNS3_TXD_BDTYPE_M with HNS3_TXD_BDTYPE_S.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The return type of hns3_get_rss_indir_size is u32. But a negative value is
returned. This patch fixes it by replacing the negative value with zero.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The return type of hns3_get_rss_key_size is u32. But a negative value is
returned. This patch fixes it by replacing the negative value with zero.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The call to rmnet_get_endpoint can potentially return NULL so check
for this to avoid any subsequent null pointer dereferences on a NULL
ep.

Detected by CoverityScan, CID#1465385 ("Dereference null return value")

Fixes: 23790ef1 ("net: qualcomm: rmnet: Allow to configure flags for existing devices")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Drop NETDEV_UNREGISTER_FINAL (was unnamed)

This series drops unused NETDEV_UNREGISTER_FINAL
after some preparations.

v2: New patch [2/3]. Use switch() in [1/3].

The first version was acked by Jason Gunthorpe,
and [1/3] was acked by David Ahern.

Since there are differences to v1, I haven't added
Acked-by tags of people. It would be nice, if you
fill OK to tag v2 too.
====================
Acked-by: NJason Gunthorpe <jgg@mellanox>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Last user is gone after bdf5bd7f "rds: tcp: remove
register_netdevice_notifier infrastructure.", so we can
remove this netdevice command. This allows to delete
rtnl_lock() in netdev_run_todo(), which is hot path for
net namespace unregistration.

dev_change_net_namespace() and netdev_wait_allrefs()
have rcu_barrier() before NETDEV_UNREGISTER_FINAL call,
and the source commits say they were introduced to
delemit the call with NETDEV_UNREGISTER, but this patch
leaves them on the places, since they require additional
analysis, whether we need in them for something else.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function just calls netdev_cmd_to_name().
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is preparation to drop NETDEV_UNREGISTER_FINAL.
Since the cmd is used in usnic_ib_netdev_event_to_string()
to get cmd name, after plain removing NETDEV_UNREGISTER_FINAL
from everywhere, we'd have holes in event2str[] in this
function.

Instead of that, let's make NETDEV_XXX commands names
available for everyone, and to define netdev_cmd_to_name()
in the way we won't have to shaffle names after their
numbers are changed.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The platform device is no longer used for DMA mapping so the
(questionable) setting of the DMA ops done here is no longer
needed. Removing it together with the HAS_DMA dependency that
it required.
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kunihiko Hayashi says:

====================
net: ethernet: ave: add UniPhier PXs3 support

Add ethernet controller support on UniPhier PXs3 SoC.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a compatible string and SoC data for ethernet controller on
UniPhier PXs3 SoC.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a compatible string for ethernet controller on UniPhier PXs3 SoC.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.17

The biggest changes are the bluetooth related patches to the rsi
driver. It adds a new bluetooth driver which communicates directly
with the wireless driver and the interface is defined in
include/net/rsi_91x.h.

Major changes:

wl1251

* read the MAC address from the NVS file

rtlwifi

* enable mac80211 fast-tx support

mt76

* add capability to select tx/rx antennas

mt7601

* let mac80211 validate rx CCMP Packet Number (PN)

rsi

* bluetooth: add new btrsi driver

* btcoex support with the new btrsi driver
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: Jon Maloy jon.maloy@ericsson.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is an && vs || typo here, which potentially leads to a NULL
dereference.

Fixes: e9e1e978 ("ibmvnic: Update TX pool cleaning routine")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for new 32MB and 64MB ISSI (Integrated Silicon
Solution, Inc.) FLASH parts.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Depend on the firmware sending us link status changes,
rather than assuming that the link goes down upon L1
configuration.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Copy vlan_id to get it displayed in vf info.
Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudhar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When NetworkManager is enabled, there are chances that interface up
is called even before probe completes. This means we have not yet
allocated the FW sge queues, hence rest of ingress queue allocation
wont be proper. Fix this by calling setup_fw_sge_queues() before
register_netdev().

Fixes: 0fbc81b3 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's')
Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: broadcom: Adaptive interrupt coalescing

This patch series adds adaptive interrupt coalescing for the Gigabit Ethernet
drivers SYSTEMPORT and GENET.

This really helps lower the interrupt count and system load, as measured by
vmstat for a Gigabit TCP RX session:

SYSTEMPORT:

without:

 1  0      0 192188      0  25472    0    0     0     0 122100 38870  1 42 57  0  0
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.0 sec  1.03 GBytes   884 Mbits/sec

with:

 1  0      0 192288      0  25468    0    0     0     0 58806 44401  0 100  0  0  0
[  5]  0.0-10.0 sec  1.04 GBytes   888 Mbits/sec

GENET:

without:

 1  0      0 1170404      0  25420    0    0     0     0 130785 63402  2 85 12  0  0
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.0 sec  1.04 GBytes   888 Mbits/sec

with:

 1  0      0 1170560      0  25420    0    0     0     0 50610 48477  0 100  0  0  0
[  5]  0.0-10.0 sec  1.05 GBytes   899 Mbits/sec

Please look at the implementation and let me know if you see any problems, this
was largely inspired by bnxt_en.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike the moder modern SYSTEMPORT hardware, we do not have a
configurable TDMA timeout, which limits us to implement adaptive RX
interrupt coalescing only. We have each of our RX rings implement a
bcmgenet_net_dim structure which holds an interrupt counter, number of
packets, bytes, and a container for a net_dim instance.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement support for adaptive RX and TX interrupt coalescing using
net_dim. We have each of our TX ring and our single RX ring implement a
bcm_sysport_net_dim structure which holds an interrupt counter, number
of packets, bytes, and a container for a net_dim instance.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Fixes to allow mv88e6xxx module to be reloaded

As reported by Uwe Kleine-König, the interrupt trigger is first
configured by DT and then reconfigured to edge. This results in a
failure on EPROBE_DEFER, or if the module is unloaded and reloaded.

A second crash happens on module reload due to a missing call to the
common IRQ free code when using polled interrupts.

With these fixes in place, it becomes possible to load and unload the
kernel modules a few times without it crashing.

v2: Fix the ü in Künig a couple of times
v3: But the ü should be an ö!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When free'ing the polled IRQs, call the common irq free code.
Otherwise the interrupts are left registered, and when we come to load
the driver a second time, we get an Opps.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By calling request_threaded_irq() with the flag IRQF_TRIGGER_FALLING
we override the trigger mode provided in device tree. And the
interrupt is actually active low, which is what all the current device
tree descriptions use.
Suggested-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added extra test cases for control actions (reclassify, pipe etc.),
cookies, max index value and police args sanity check.
Signed-off-by: NRoman Mashak <mrv@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Haiyang Zhang says:

====================
hv_netvsc: Fix/improve RX path error handling

Fix the status code returned to the host. Also add range
check for rx packet offset and length.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds range checking for rx packet offset and length.
It may only happen if there is a host side bug.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero.
Some functions returns 0 when it actually means NVSP_STAT_SUCCESS.
This patch fixes them.

In netvsc_receive(), it puts the last RNDIS packet's receive status
for all packets in a vmxferpage which may contain multiple RNDIS
packets.
This patch puts NVSP_STAT_FAIL in the receive completion if one of
the packets in a vmxferpage fails.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yonghong Song says:

====================
net: permit skb_segment on head_frag frag_list skb

One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.
 ...
    3665                 while (pos < offset + len) {
    3666                         if (i >= nfrags) {
    3667                                 BUG_ON(skb_headlen(list_skb));
 ...

The triggering input skb has the following properties:
    list_skb = skb->frag_list;
    skb->nfrags != NULL && skb_headlen(list_skb) != 0
and skb_segment() is not able to handle a frag_list skb
if its headlen (list_skb->len - list_skb->data_len) is not 0.

Patch #1 provides a simple solution to avoid BUG_ON. If
list_skb->head_frag is true, its page-backed frag will
be processed before the list_skb->frags.
Patch #2 provides a test case in test_bpf module which
constructs a skb and calls skb_segment() directly. The test
case is able to trigger the BUG_ON without Patch #1.

The patch has been tested in the following setup:
  ipv6_host <-> nat_server <-> ipv4_host
where nat_server has a bpf program doing ipv4<->ipv6
translation and forwarding through clsact hook
bpf_skb_change_proto.

Changelog:
v5 -> v6:
  . Added back missed BUG_ON(!nfrags) for zero
    skb_headlen(skb) case, plus a couple of
    cosmetic changes, from Alexander.
v4 -> v5:
  . Replace local variable head_frag with
    a static inline function skb_head_frag_to_page_desc
    which gets the head_frag on-demand. This makes
    code more readable and also does not increase
    the stack size, from Alexander.
  . Remove the "if(nfrags)" guard for skb_orphan_frags
    and skb_zerocopy_clone as I found that they can
    handle zero-frag skb (with non-zero skb_headlen(skb))
    properly.
  . Properly release segment list from skb_segment()
    in the test, from Eric.
v3 -> v4:
  . Remove dynamic memory allocation and use rewinding
    for both index and frag to remove one branch in fast path,
    from Alexander.
  . Fix a bunch of issues in test_bpf skb_segment() test,
    including proper way to allocate skb, proper function
    argument for skb_add_rx_frag and not freeint skb, etc.,
    from Eric.
v2 -> v3:
  . Use starting frag index -1 (instead of 0) to
    special process head_frag before other frags in the skb,
    from Alexander Duyck.
v1 -> v2:
  . Removed never-hit BUG_ON, spotted by Linyu Yuan.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without the previous commit,
"modprobe test_bpf" will have the following errors:
...
[   98.149165] ------------[ cut here ]------------
[   98.159362] kernel BUG at net/core/skbuff.c:3667!
[   98.169756] invalid opcode: 0000 [#1] SMP PTI
[   98.179370] Modules linked in:
[   98.179371]  test_bpf(+)
...
which triggers the bug the previous commit intends to fix.

The skbs are constructed to mimic what mlx5 may generate.
The packet size/header may not mimic real cases in production. But
the processing flow is similar.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.

3472 struct sk_buff *skb_segment(struct sk_buff *head_skb,
3473                             netdev_features_t features)
3474 {
3475         struct sk_buff *segs = NULL;
3476         struct sk_buff *tail = NULL;
...
3665                 while (pos < offset + len) {
3666                         if (i >= nfrags) {
3667                                 BUG_ON(skb_headlen(list_skb));
3668
3669                                 i = 0;
3670                                 nfrags = skb_shinfo(list_skb)->nr_frags;
3671                                 frag = skb_shinfo(list_skb)->frags;
3672                                 frag_skb = list_skb;
...

call stack:
...
 #1 [ffff883ffef03558] __crash_kexec at ffffffff8110c525
 #2 [ffff883ffef03620] crash_kexec at ffffffff8110d5cc
 #3 [ffff883ffef03640] oops_end at ffffffff8101d7e7
 #4 [ffff883ffef03668] die at ffffffff8101deb2
 #5 [ffff883ffef03698] do_trap at ffffffff8101a700
 #6 [ffff883ffef036e8] do_error_trap at ffffffff8101abfe
 #7 [ffff883ffef037a0] do_invalid_op at ffffffff8101acd0
 #8 [ffff883ffef037b0] invalid_op at ffffffff81a00bab
    [exception RIP: skb_segment+3044]
    RIP: ffffffff817e4dd4  RSP: ffff883ffef03860  RFLAGS: 00010216
    RAX: 0000000000002bf6  RBX: ffff883feb7aaa00  RCX: 0000000000000011
    RDX: ffff883fb87910c0  RSI: 0000000000000011  RDI: ffff883feb7ab500
    RBP: ffff883ffef03928   R8: 0000000000002ce2   R9: 00000000000027da
    R10: 000001ea00000000  R11: 0000000000002d82  R12: ffff883f90a1ee80
    R13: ffff883fb8791120  R14: ffff883feb7abc00  R15: 0000000000002ce2
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #9 [ffff883ffef03930] tcp_gso_segment at ffffffff818713e7
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-03-23

This series contains updates to ixgbe and ixgbevf only.

Paul adds status register reads to reduce a potential race condition
where registers can read 0xFFFFFFFF during a PCI reset, which in turn
causes the driver to remove the adapter.  Then fixes an assignment
operation with an "OR" operation.

Shannon Nelson provides several IPsec offload cleanups to ixgbe, as well as a
patch to enable TSO with IPsec offload.

Tony provides the much anticipated XDP support for ixgbevf.  Currently,
pass, drop and XDP_TX actions are supported, as well as meta data and
stats reporting.

Björn Töpel tweaks the page counting for XDP_REDIRECT, since a page can
have its reference count decreased via the xdp_do_redirect() call.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Intiyaz Basha says:

====================
liquidio: Tx queue cleanup

Moved some common function to octeon_network.h
Removed some unwanted functions and checks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For consistency renaming txqs_start to start_txqs
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>