If firmware does not implement AUX_LOOP comand in 32 bit mode it
is unlikely to implement it in 64 bit mode. Same goes for active
multiplexing. See:

http://bugzilla.kernel.org/show_bug.cgi?id=9664Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Acer Aspire 9110 series also requires the Dritek quirk to enable the
extra scancodes.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Some Wistron based laptops need us to explicitly enable the 'Dritek
keyboard extension' to make their extra keys start generating scancodes.
Originally, this was just confined to older laptops, but a few Acer
laptops have turned up in 2007 that also need this again.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When booting under Microsoft Virtual Machine, the noloop quirk is
needed, otherwise PS/2 mouse is not properly detected.
Reported-by: NLawrence Steeger <vendor@russte.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This fixes "atkbd.c: Suprious NAK on isa0060/serio0" errors for
HP Pavilion DV4270ca.
Signed-off-by: NElvis Pranskevichus <el@prans.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

On some boxes that don't have PS/2 mice connected at startup BIOS
completely disables AUX port and attempts to access it result in
hosed keyboard. Historically we do not trust ACPI/PNP data on
i386 and try to poke AUX port even if we did not find an active
PNP node for it. However in cases when BIOS writers got KBD port
properly described we can assume that they did the right thing
for AUX port as well.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports and, according to documentation,
automatically disables touchpad when an external mouse is plugged
into a port replicator, so MUX mode would not work anyway.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The box does not implement AUX LOOP command properly and so we
can't test for AUX IRQ delivery so blacklist it via DMI and
assume that AUX port is present.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This board does not raise AUX IRQ in response to AUX LOOP command
which interferes with our test for proper AUX IRQ wiring. Put it
in the blacklist and assume mouse is present.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add PNP IDs for Fujitsu touchscreen/touchpad for AUX port
detection to latch onto.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is no data coming from touchscreen on Panasonic CF-29
notebook unless keyboard controller is in legacy mode.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports so disabling MUX mode is safe.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We already had entry for Fujitsu Lifebook P7010 in the nomux
blacklist but for some reason Fujitsu decided to fiddle with
DMI data...
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When keyboard controller is in active multiplexing mode ALPS touchpad
may get detected twice. Since the box does not have external PS/2
ports simply disabling MUX mode is safe solution.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

ALPS touchpad on Amoi laptops (Amoi is a vendor in China) is not
detected when keyboard controller is in MUX mode, add to blacklist.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Do not assume that pnp_register_driver() returns the number of
devices claimed.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NBen Collins <bcollins@ubuntu.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add yet another entry to the ever-growing list of boxes with
non-working MUX implementation.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

       creation of keyboard port.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

       is absent from ACPI/PNP tables.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

       put in MUX mode - Fujitsu Lifebook S6230
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

       because it interferes with ALPS touchpad detection and
       causes horrible death on reboot. Since P10 does not have
       external PS/2 ports MUX mode does not have any advantages
       over legacy mode anyway.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

       when no i8042 controller (not PnP, not legacy) is present.

From: Kurt Garloff <garloff@suse.de>
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

       for i386, it's printed on many machines and usually is not
       a cause for worry.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>

       when only a keyboard part of the controller is detected.
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!