This patch enable the SPI Communications Controller driver as module for the
Amlogic platform.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

This patch enables the MEDIA Infrared RC Decoders and Meson Infrared
decoder for ARM64 defconfig.
These drivers are selected as modules by default.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
[khilman: make RC_CORE modular too]
Signed-off-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

The way we handle include paths for DT has changed a bit, which
broke a file that had an unconventional way to reference a common
header file:

arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:47:10: fatal error: include/dt-bindings/input/linux-event-codes.h: No such file or directory

This removes the leading "include/" from the path name, which fixes it.

Fixes: d5d332d3 ("devicetree: Move include prefixes from arch to separate directory")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This
enables support for clocks, regulators, and USB PHY.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NRob Herring <robh@kernel.org>
[Olof: Turned off _RPM configs per follow-up email]
Signed-off-by: NOlof Johansson <olof@lixom.net>

Sync the defconfig with savedefconfig as config options change/move over
time.

Generated with the following commands:
make defconfig
make savedefconfig
cp defconfig arch/arm64/configs/defconfig
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.

Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.

As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.

Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.

As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.

Fixes: 4027494a ('ARM: dts: add arm/arm64 include symlinks')
Reported-by: NRussell King <linux@armlinux.org.uk>
Reported-by: NOmar Sandoval <osandov@osandov.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NRob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arch <linux-arch@vger.kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Currently, cpus_set_cap() calls static_branch_enable_cpuslocked(), which
must take the jump_label mutex.

We call cpus_set_cap() in the secondary bringup path, from the idle
thread where interrupts are disabled. Taking a mutex in this path "is a
NONO" regardless of whether it's contended, and something we must avoid.
We didn't spot this until recently, as ___might_sleep() won't warn for
this case until all CPUs have been brought up.

This patch avoids taking the mutex in the secondary bringup path. The
poking of static keys is deferred until enable_cpu_capabilities(), which
runs in a suitable context on the boot CPU. To account for the static
keys being set later, cpus_have_const_cap() is updated to use another
static key to check whether the const cap keys have been initialised,
falling back to the caps bitmap until this is the case.

This means that users of cpus_have_const_cap() gain should only gain a
single additional NOP in the fast path once the const caps are
initialised, but should always see the current cap value.

The hyp code should never dereference the caps array, since the caps are
initialized before we run the module initcall to initialise hyp. A check
is added to the hyp init code to document this requirement.

This change will sidestep a number of issues when the upcoming hotplug
locking rework is merged.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NMarc Zyniger <marc.zyngier@arm.com>
Reviewed-by: NSuzuki Poulose <suzuki.poulose@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

commit d98ecdac ("arm64: perf: Count EL2 events if the kernel is
running in HYP") returns -EINVAL when perf system call perf_event_open is
called with exclude_hv != exclude_kernel. This change breaks applications
on VHE enabled ARMv8.1 platforms. The issue was observed with HHVM
application, which calls perf_event_open with exclude_hv = 1 and
exclude_kernel = 0.

There is no separate hypervisor privilege level when VHE is enabled, the
host kernel runs at EL2. So when VHE is enabled, we should ignore
exclude_hv from the application. This behaviour is consistent with PowerPC
where the exclude_hv is ignored when the hypervisor is not present and with
x86 where this flag is ignored.
Signed-off-by: NGanapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[will: added comment to justify the behaviour of exclude_hv]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The cmpxchg implementation introduced by commit c342f782 ("arm64:
cmpxchg: patch in lse instructions when supported by the CPU") performs
an apparently redundant register move of [old] to [oldval] in the
success case - it always uses the same register width as [oldval] was
originally loaded with, and is only executed when [old] and [oldval] are
known to be equal anyway.

The only effect it seemingly does have is to take up a surprising amount
of space in the kernel text, as removing it reveals:

   text	   data	    bss	    dec	    hex	filename
12426658	1348614	4499749	18275021	116dacd	vmlinux.o.new
12429238	1348614	4499749	18277601	116e4e1	vmlinux.o.old
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We like living dangerously. Nothing explicitely forbids stack-protector
to be used in the EL2 code, while distributions routinely compile their
kernel with it. We're just lucky that no code actually triggers the
instrumentation.

Let's not try our luck for much longer, and disable stack-protector
for code living at EL2.

Cc: stable@vger.kernel.org
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Shubham was recently asking on netdev why in arm64 JIT we don't multiply
the index for accessing the tail call map by 8. That led me into testing
out arm64 JIT wrt tail calls and it turned out I got a NULL pointer
dereference on the tail call.

The buggy access is at:

  prog = array->ptrs[index];
  if (prog == NULL)
      goto out;

  [...]
  00000060:  d2800e0a  mov x10, #0x70 // #112
  00000064:  f86a682a  ldr x10, [x1,x10]
  00000068:  f862694b  ldr x11, [x10,x2]
  0000006c:  b40000ab  cbz x11, 0x00000080
  [...]

The code triggering the crash is f862694b. x1 at the time contains the
address of the bpf array, x10 offsetof(struct bpf_array, ptrs). Meaning,
above we load the pointer to the program at map slot 0 into x10. x10
can then be NULL if the slot is not occupied, which we later on try to
access with a user given offset in x2 that is the map index.

Fix this by emitting the following instead:

  [...]
  00000060:  d2800e0a  mov x10, #0x70 // #112
  00000064:  8b0a002a  add x10, x1, x10
  00000068:  d37df04b  lsl x11, x2, #3
  0000006c:  f86b694b  ldr x11, [x10,x11]
  00000070:  b40000ab  cbz x11, 0x00000084
  [...]

This basically adds the offset to ptrs to the base address of the bpf
array we got and we later on access the map with an index * 8 offset
relative to that. The tail call map itself is basically one large area
with meta data at the head followed by the array of prog pointers.
This makes tail calls working again, tested on Cavium ThunderX ARMv8.

Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper")
Reported-by: NShubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_ARM64_MODULE_PLTS is enabled, the first allocation using the
module space fails, because the module is too big, and then the module
allocation is attempted from vmalloc space. Silence the first allocation
failure in that case by setting __GFP_NOWARN.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NMark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Clang tries to warn when there's a mismatch between an operand's size,
and the size of the register it is held in, as this may indicate a bug.
Specifically, clang warns when the operand's type is less than 64 bits
wide, and the register is used unqualified (i.e. %N rather than %xN or
%wN).

Unfortunately clang can generate these warnings for unreachable code.
For example, for code like:

do {                                            \
        typeof(*(ptr)) __v = (v);               \
        switch(sizeof(*(ptr))) {                \
        case 1:                                 \
                // assume __v is 1 byte wide    \
                asm ("{op}b %w0" : : "r" (v));  \
                break;                          \
        case 8:                                 \
                // assume __v is 8 bytes wide   \
                asm ("{op} %0" : : "r" (v));    \
                break;                          \
        }
while (0)

... if op() were passed a char value and pointer to char, clang may
produce a warning for the unreachable case where sizeof(*(ptr)) is 8.

For the same reasons, clang produces warnings when __put_user_err() is
used for types that are less than 64 bits wide.

We could avoid this with a cast to a fixed-width type in each of the
cases. However, GCC will then warn that pointer types are being cast to
mismatched integer sizes (in unreachable paths).

Another option would be to use the same union trickery as we do for
__smp_store_release() and __smp_load_acquire(), but this is fairly
invasive.

Instead, this patch suppresses the clang warning by using an x modifier
in the assembly for the 8 byte case of __put_user_err(). No additional
work is necessary as the value has been cast to typeof(*(ptr)), so the
compiler will have performed any necessary extension for the reachable
case.

For consistency, __get_user_err() is also updated to use the x modifier
for its 8 byte case.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reported-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The LSE atomic code uses asm register variables to ensure that
parameters are allocated in specific registers. In the majority of cases
we specifically ask for an x register when using 64-bit values, but in a
couple of cases we use a w regsiter for a 64-bit value.

For asm register variables, the compiler only cares about the register
index, with wN and xN having the same meaning. The compiler determines
the register size to use based on the type of the variable. Thus, this
inconsistency is merely confusing, and not harmful to code generation.

For consistency, this patch updates those cases to use the x register
alias. There should be no functional change as a result of this patch.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Our compat swp emulation holds the compat user address in an unsigned
int, which it passes to __user_swpX_asm(). When a 32-bit value is passed
in a register, the upper 32 bits of the register are unknown, and we
must extend the value to 64 bits before we can use it as a base address.

This patch casts the address to unsigned long to ensure it has been
suitably extended, avoiding the potential issue, and silencing a related
warning from clang.

Fixes: bd35a4ad ("arm64: Port SWP/SWPB emulation support from arm")
Cc: <stable@vger.kernel.org> # 3.19.x-
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Our access_ok() simply hands its arguments over to __range_ok(), which
implicitly assummes that the addr parameter is 64 bits wide. This isn't
necessarily true for compat code, which might pass down a 32-bit address
parameter.

In these cases, we don't have a guarantee that the address has been zero
extended to 64 bits, and the upper bits of the register may contain
unknown values, potentially resulting in a suprious failure.

Avoid this by explicitly casting the addr parameter to an unsigned long
(as is done on other architectures), ensuring that the parameter is
widened appropriately.

Fixes: 0aea86a2 ("arm64: User access library functions")
Cc: <stable@vger.kernel.org> # 3.7.x-
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When an inline assembly operand's type is narrower than the register it
is allocated to, the least significant bits of the register (up to the
operand type's width) are valid, and any other bits are permitted to
contain any arbitrary value. This aligns with the AAPCS64 parameter
passing rules.

Our __smp_store_release() implementation does not account for this, and
implicitly assumes that operands have been zero-extended to the width of
the type being stored to. Thus, we may store unknown values to memory
when the value type is narrower than the pointer type (e.g. when storing
a char to a long).

This patch fixes the issue by casting the value operand to the same
width as the pointer operand in all cases, which ensures that the value
is zero-extended as we expect. We use the same union trickery as
__smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that
pointers are potentially cast to narrower width integers in unreachable
paths.

A whitespace issue at the top of __smp_store_release() is also
corrected.

No changes are necessary for __smp_load_acquire(). Load instructions
implicitly clear any upper bits of the register, and the compiler will
only consider the least significant bits of the register as valid
regardless.

Fixes: 47933ad4 ("arch: Introduce smp_load_acquire(), smp_store_release()")
Fixes: 878a84d5 ("arm64: add missing data types in smp_load_acquire/smp_store_release")
Cc: <stable@vger.kernel.org> # 3.14.x-
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The inline assembly in __XCHG_CASE() uses a +Q constraint to hazard
against other accesses to the memory location being exchanged. However,
the pointer passed to the constraint is a u8 pointer, and thus the
hazard only applies to the first byte of the location.

GCC can take advantage of this, assuming that other portions of the
location are unchanged, as demonstrated with the following test case:

union u {
	unsigned long l;
	unsigned int i[2];
};

unsigned long update_char_hazard(union u *u)
{
	unsigned int a, b;

	a = u->i[1];
	asm ("str %1, %0" : "+Q" (*(char *)&u->l) : "r" (0UL));
	b = u->i[1];

	return a ^ b;
}

unsigned long update_long_hazard(union u *u)
{
	unsigned int a, b;

	a = u->i[1];
	asm ("str %1, %0" : "+Q" (*(long *)&u->l) : "r" (0UL));
	b = u->i[1];

	return a ^ b;
}

The linaro 15.08 GCC 5.1.1 toolchain compiles the above as follows when
using -O2 or above:

0000000000000000 <update_char_hazard>:
   0:	d2800001 	mov	x1, #0x0                   	// #0
   4:	f9000001 	str	x1, [x0]
   8:	d2800000 	mov	x0, #0x0                   	// #0
   c:	d65f03c0 	ret

0000000000000010 <update_long_hazard>:
  10:	b9400401 	ldr	w1, [x0,#4]
  14:	d2800002 	mov	x2, #0x0                   	// #0
  18:	f9000002 	str	x2, [x0]
  1c:	b9400400 	ldr	w0, [x0,#4]
  20:	4a000020 	eor	w0, w1, w0
  24:	d65f03c0 	ret

This patch fixes the issue by passing an unsigned long pointer into the
+Q constraint, as we do for our cmpxchg code. This may hazard against
more than is necessary, but this is better than missing a necessary
hazard.

Fixes: 305d454a ("arm64: atomics: implement native {relaxed, acquire, release} atomics")
Cc: <stable@vger.kernel.org> # 4.4.x-
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

configure some fixed mmc parameters
Signed-off-by: NYong Mao <yong.mao@mediatek.com>
Signed-off-by: NChaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

When handling a data abort from EL0, we currently zero the top byte of
the faulting address, as we assume the address is a TTBR0 address, which
may contain a non-zero address tag. However, the address may be a TTBR1
address, in which case we should not zero the top byte. This patch fixes
that. The effect is that the full TTBR1 address is passed to the task's
signal handler (or printed out in the kernel log).

When handling a data abort from EL1, we leave the faulting address
intact, as we assume it's either a TTBR1 address or a TTBR0 address with
tag 0x00. This is true as far as I'm aware, we don't seem to access a
tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to
forget about address tags, and code added in the future may not always
remember to remove tags from addresses before accessing them. So add tag
handling to the EL1 data abort handler as well. This also makes it
consistent with the EL0 data abort handler.

Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.

The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.

Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.

Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When we emulate userspace cache maintenance in the kernel, we can
currently send the task a SIGSEGV even though the maintenance was done
on a valid address. This happens if the address has a non-zero address
tag, and happens to not be mapped in.

When we get the address from a user register, we don't currently remove
the address tag before performing cache maintenance on it. If the
maintenance faults, we end up in either __do_page_fault, where find_vma
can't find the VMA if the address has a tag, or in do_translation_fault,
where the tagged address will appear to be above TASK_SIZE. In both
cases, the address is not mapped in, and the task is sent a SIGSEGV.

This patch removes the tag from the address before using it. With this
patch, the fault is handled correctly, the address gets mapped in, and
the cache maintenance succeeds.

As a second bug, if cache maintenance (correctly) fails on an invalid
tagged address, the address gets passed into arm64_notify_segfault,
where find_vma fails to find the VMA due to the tag, and the wrong
si_code may be sent as part of the siginfo_t of the segfault. With this
patch, the correct si_code is sent.

Fixes: 7dd01aef ("arm64: trap userspace "dc cvau" cache operation on errata-affected core")
Cc: <stable@vger.kernel.org> # 4.8.x-
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Now that all call sites, completely decouple cacheflush.h and
set_memory.h

[sfr@canb.auug.org.au: kprobes/x86: merge fix for set_memory.h decoupling]
  Link: http://lkml.kernel.org/r/20170418180903.10300fd3@canb.auug.org.au
Link: http://lkml.kernel.org/r/1488920133-27229-17-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The set_memory_* functions have moved to set_memory.h.  Use that header
explicitly.

Link: http://lkml.kernel.org/r/1488920133-27229-4-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "set_memory_* functions header refactor", v3.

The set_memory_* APIs came out of a desire to have a better way to
change memory attributes.  Many of these attributes were linked to cache
functionality so the prototypes were put in cacheflush.h.  These days,
the APIs have grown and have a much wider use than just cache APIs.  To
support this growth, split off set_memory_* and friends into a separate
header file to avoid growing cacheflush.h for APIs that have nothing to
do with caches.

Link: http://lkml.kernel.org/r/1488920133-27229-2-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a new attribute to GICV3 KVM device
KVM_DEV_ARM_VGIC_GRP_CTRL group. This allows userspace to
flush all GICR pending tables into guest RAM.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce new attributes in KVM_DEV_ARM_VGIC_GRP_CTRL group:
- KVM_DEV_ARM_ITS_SAVE_TABLES: saves the ITS tables into guest RAM
- KVM_DEV_ARM_ITS_RESTORE_TABLES: restores them into VGIC internal
  structures.

We hold the vcpus lock during the save and restore to make
sure no vcpu is running.

At this stage the functionality is not yet implemented. Only
the skeleton is put in place.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
[Given we will move the iodev register until setting the base addr]
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

The ITS KVM device exposes a new KVM_DEV_ARM_VGIC_GRP_ITS_REGS
group which allows the userspace to save/restore ITS registers.

At this stage the get/set/has operations are not yet implemented.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

While honouring the DMA_ATTR_FORCE_CONTIGUOUS on arm64 (commit
44176bb3: "arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to
IOMMU"), the existing uses of dma_mmap_attrs() and dma_get_sgtable()
have been broken by passing a physically contiguous vm_struct with an
invalid pages pointer through the common iommu API.

Since the coherent allocation with DMA_ATTR_FORCE_CONTIGUOUS uses CMA,
this patch simply reuses the existing swiotlb logic for mmap and
get_sgtable.

Note that the current implementation of get_sgtable (both swiotlb and
iommu) is broken if dma_declare_coherent_memory() is used since such
memory does not have a corresponding struct page. To be addressed in a
subsequent patch.

Fixes: 44176bb3 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Reported-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Tested-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

For some time now we have been having a lot of shared functionality
between the arm and arm64 KVM support in arch/arm, which not only
required a horrible inter-arch reference from the Makefile in
arch/arm64/kvm, but also created confusion for newcomers to the code
base, as was recently seen on the mailing list.

Further, it causes confusion for things like cscope, which needs special
attention to index specific shared files for arm64 from the arm tree.

Move the shared files into virt/kvm/arm and move the trace points along
with it.  When moving the tracepoints we have to modify the way the vgic
creates definitions of the trace points, so we take the chance to
include the VGIC tracepoints in its very own special vgic trace.h file.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

When the instruction right before the branch destination is
a 64 bit load immediate, we currently calculate the wrong
jump offset in the ctx->offset[] array as we only account
one instruction slot for the 64 bit load immediate although
it uses two BPF instructions. Fix it up by setting the offset
into the right slot after we incremented the index.

Before (ldimm64 test 1):

  [...]
  00000020:  52800007  mov w7, #0x0 // #0
  00000024:  d2800060  mov x0, #0x3 // #3
  00000028:  d2800041  mov x1, #0x2 // #2
  0000002c:  eb01001f  cmp x0, x1
  00000030:  54ffff82  b.cs 0x00000020
  00000034:  d29fffe7  mov x7, #0xffff // #65535
  00000038:  f2bfffe7  movk x7, #0xffff, lsl #16
  0000003c:  f2dfffe7  movk x7, #0xffff, lsl #32
  00000040:  f2ffffe7  movk x7, #0xffff, lsl #48
  00000044:  d29dddc7  mov x7, #0xeeee // #61166
  00000048:  f2bdddc7  movk x7, #0xeeee, lsl #16
  0000004c:  f2ddddc7  movk x7, #0xeeee, lsl #32
  00000050:  f2fdddc7  movk x7, #0xeeee, lsl #48
  [...]

After (ldimm64 test 1):

  [...]
  00000020:  52800007  mov w7, #0x0 // #0
  00000024:  d2800060  mov x0, #0x3 // #3
  00000028:  d2800041  mov x1, #0x2 // #2
  0000002c:  eb01001f  cmp x0, x1
  00000030:  540000a2  b.cs 0x00000044
  00000034:  d29fffe7  mov x7, #0xffff // #65535
  00000038:  f2bfffe7  movk x7, #0xffff, lsl #16
  0000003c:  f2dfffe7  movk x7, #0xffff, lsl #32
  00000040:  f2ffffe7  movk x7, #0xffff, lsl #48
  00000044:  d29dddc7  mov x7, #0xeeee // #61166
  00000048:  f2bdddc7  movk x7, #0xeeee, lsl #16
  0000004c:  f2ddddc7  movk x7, #0xeeee, lsl #32
  00000050:  f2fdddc7  movk x7, #0xeeee, lsl #48
  [...]

Also, add a couple of test cases to make sure JITs pass
this test. Tested on Cavium ThunderX ARMv8. The added
test cases all pass after the fix.

Fixes: 8eee539d ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()")
Reported-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Cc: Xi Wang <xi.wang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This work adds BPF_XADD for BPF_W/BPF_DW to the arm64 JIT and therefore
completes JITing of all BPF instructions, meaning we can thus also remove
the 'notyet' label and do not need to fall back to the interpreter when
BPF_XADD is used in a program!

This now also brings arm64 JIT in line with x86_64, s390x, ppc64, sparc64,
where all current eBPF features are supported.

BPF_W example from test_bpf:

  .u.insns_int = {
    BPF_ALU32_IMM(BPF_MOV, R0, 0x12),
    BPF_ST_MEM(BPF_W, R10, -40, 0x10),
    BPF_STX_XADD(BPF_W, R10, R0, -40),
    BPF_LDX_MEM(BPF_W, R0, R10, -40),
    BPF_EXIT_INSN(),
  },

  [...]
  00000020:  52800247  mov w7, #0x12 // #18
  00000024:  928004eb  mov x11, #0xffffffffffffffd8 // #-40
  00000028:  d280020a  mov x10, #0x10 // #16
  0000002c:  b82b6b2a  str w10, [x25,x11]
  // start of xadd mapping:
  00000030:  928004ea  mov x10, #0xffffffffffffffd8 // #-40
  00000034:  8b19014a  add x10, x10, x25
  00000038:  f9800151  prfm pstl1strm, [x10]
  0000003c:  885f7d4b  ldxr w11, [x10]
  00000040:  0b07016b  add w11, w11, w7
  00000044:  880b7d4b  stxr w11, w11, [x10]
  00000048:  35ffffab  cbnz w11, 0x0000003c
  // end of xadd mapping:
  [...]

BPF_DW example from test_bpf:

  .u.insns_int = {
    BPF_ALU32_IMM(BPF_MOV, R0, 0x12),
    BPF_ST_MEM(BPF_DW, R10, -40, 0x10),
    BPF_STX_XADD(BPF_DW, R10, R0, -40),
    BPF_LDX_MEM(BPF_DW, R0, R10, -40),
    BPF_EXIT_INSN(),
  },

  [...]
  00000020:  52800247  mov w7,  #0x12 // #18
  00000024:  928004eb  mov x11, #0xffffffffffffffd8 // #-40
  00000028:  d280020a  mov x10, #0x10 // #16
  0000002c:  f82b6b2a  str x10, [x25,x11]
  // start of xadd mapping:
  00000030:  928004ea  mov x10, #0xffffffffffffffd8 // #-40
  00000034:  8b19014a  add x10, x10, x25
  00000038:  f9800151  prfm pstl1strm, [x10]
  0000003c:  c85f7d4b  ldxr x11, [x10]
  00000040:  8b07016b  add x11, x11, x7
  00000044:  c80b7d4b  stxr w11, x11, [x10]
  00000048:  35ffffab  cbnz w11, 0x0000003c
  // end of xadd mapping:
  [...]

Tested on Cavium ThunderX ARMv8, test suite results after the patch:

  No JIT:   [ 3751.855362] test_bpf: Summary: 311 PASSED, 0 FAILED, [0/303 JIT'ed]
  With JIT: [ 3573.759527] test_bpf: Summary: 311 PASSED, 0 FAILED, [303/303 JIT'ed]
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following commit:

  commit 815dd187
  Author: Bart Van Assche <bart.vanassche@sandisk.com>
  Date:   Fri Jan 20 13:04:04 2017 -0800

      treewide: Consolidate get_dma_ops() implementations

rearranges get_dma_ops in a way that xen_dma_ops are not returned when
running on Xen anymore, dev->dma_ops is returned instead (see
arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and
include/linux/dma-mapping.h:get_dma_ops).

Fix the problem by storing dev->dma_ops in dev_archdata, and setting
dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally
by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from
dev_archdata when needed. It also allows us to remove __generic_dma_ops
from common headers.
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>
Tested-by: NJulien Grall <julien.grall@arm.com>
Suggested-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>        [4.11+]
CC: linux@armlinux.org.uk
CC: catalin.marinas@arm.com
CC: will.deacon@arm.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Julien Grall <julien.grall@arm.com>

Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling
the trapped system registers, completely missing the fact that the
fields for Rt and Rt2 are now 5 bit wide, and not 4...

Let's fix it, and provide an accessor for the most common Rt case.

Cc: stable@vger.kernel.org
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

The include file does not need any PCI specifics, so remove
that include. Also fix the places that relied on it.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

For both cases, the verifier is already rejecting such invalid
formed instructions. Thus, remove these artifacts from old times
and align it with ppc64, sparc64 and s390x JITs that don't have
them in the first place.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On arm32, the machine model specified in the device tree is printed
during boot-up, courtesy of of_flat_dt_match_machine().

On arm64, of_flat_dt_match_machine() is not called, and the machine
model information is not available from the kernel log.

Print the machine model to make it easier to derive the machine model
from an arbitrary kernel boot log.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add missing L2 cache events: read/write accesses and misses, as well as
the DTLB refills.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Start to populate the device tree of the Armada 37xx with the pincontrol
configuration used on the board providing a dts.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>