- 19 12月, 2007 4 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: ... WARNING: vmlinux.o(.text+0x41cd3): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq') WARNING: vmlinux.o(.text+0x41d67): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq') ... Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Kevin Hilman 提交于
Add unlocked version for use by irq_chip.set_type handlers which may wish to change handler to level or edge handler when IRQ type is changed. The normal set_irq_handler() call cannot be used because it tries to take irq_desc.lock which is already held when the irq_chip.set_type hook is called. Signed-off-by: NKevin Hilman <khilman@mvista.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Resolve the following regression of a choppy, almost unusable laptop: http://lkml.org/lkml/2007/12/7/299 http://bugzilla.kernel.org/show_bug.cgi?id=9525 A previous version of the code did the reprogramming of the broadcast device in the return from idle code. This was removed, but the logic in tick_handle_oneshot_broadcast() was kept the same. When a broadcast interrupt happens we signal the expiry to all CPUs which have an expired event. If none of the CPUs has an expired event, which can happen in dyntick mode, then we reprogram the broadcast device. We do not reprogram otherwise, but this is only correct if all CPUs, which are in the idle broadcast state have been woken up. The code ignores, that there might be pending not yet expired events on other CPUs, which are in the idle broadcast state. So the delivery of those events can be delayed for quite a time. Change the tick_handle_oneshot_broadcast() function to check for CPUs, which are in broadcast state and are not woken up by the current event, and enforce the rearming of the broadcast device for those CPUs. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Barry Kasindorf 提交于
This patch is for controlling the upper 32bits of the event ctrl msrs. This includes the upper 4 bits of the event select and the Guest Only and Host Only bits This patch is necessary to make Event Based Profiling work reliably on a Family 10h processor [akpm@linux-foundation.org: checkpatch.pl fixes] Signed-off-by: NBarry Kasindorf <barry.kasindorf@amd.com> Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 12月, 2007 36 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits) iwlwifi: fix rf_kill state inconsistent during suspend and resume b43: Fix rfkill radio LED bcm43xx_debugfs sscanf fix libertas: select WIRELESS_EXT iwlwifi3945/4965: fix rate control algo reference leak ieee80211_rate: missed unlock wireless/ipw2200.c: add __dev{init,exit} annotations zd1211rw: Fix alignment problems libertas: add Dan Williams as maintainer sis190 endianness ucc_geth: really fix section mismatch pcnet_cs: add new id ixgb: make sure jumbos stay enabled after reset Net: ibm_newemac, remove SPIN_LOCK_UNLOCKED net: smc911x: shut up compiler warnings ucc_geth: minor whitespace fix drivers/net/s2io.c section fixes drivers/net/sis190.c section fix hamachi endianness fixes e100: free IRQ to remove warningwhenrebooting ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix ATAPI draining libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size libata-acpi: implement _GTF command filtering libata-acpi: improve _GTF execution error handling and reporting libata-acpi: improve ACPI disabling libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM during resume libata-acpi: implement and use ata_acpi_init_gtm() libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() libata: ata_dev_disable() should be called from EH context libata: add more opcodes to ata.h libata: update ata_*_printk() macros such that level can be a variable libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters sata_mv: improve warnings about Highpoint RocketRAID 23xx cards libata: add ST3160023AS / 3.42 to NCQ blacklist libata: clear link->eh_info.serror from ata_std_postreset() sata_sil: fix spurious IRQ handling
-
由 Eric W. Biederman 提交于
Fix: sysctl table check failed: /net/ax25/ax0/ax25_default_mode .3.9.1.2 Unknown sysctl binary path Pid: 2936, comm: kissattach Not tainted 2.6.24-rc5 #1 [<c012ca6a>] set_fail+0x3b/0x43 [<c012ce7a>] sysctl_check_table+0x408/0x456 [<c012ce8e>] sysctl_check_table+0x41c/0x456 [<c012ce8e>] sysctl_check_table+0x41c/0x456 ... Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Bernard Pidoux <pidoux@ccr.jussieu.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
This ensures that the quicklists are drained. Otherwise draining may only occur when the processor reaches an idle state. Fixes fatal leakage of pgd_t's on 2.6.22 and later. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Reported-by: NDhaval Giani <dhaval@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Remove a recently added useless masking of GFP_ZERO. GFP_ZERO is already masked out in new_slab() (See how it calls allocate_slab). No need to do it twice. This reverts the SLUB parts of 7fd27255. Cc: Matt Mackall <mpm@selenic.com> Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Fix compilation warning about discarded const. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Aravamudan 提交于
The hugetlb documentation has gotten a bit out of sync with the current code. Updated the sysctl file to refer to Documentation/vm/hugetlbpage.txt. Update that file to contain the current state of affairs (with the newer named sysctl in place). Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Acked-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Aravamudan 提交于
This reverts commit 54f9f80d ("hugetlb: Add hugetlb_dynamic_pool sysctl") Given the new sysctl nr_overcommit_hugepages, the boolean dynamic pool sysctl is not needed, as its semantics can be expressed by 0 in the overcommit sysctl (no dynamic pool) and non-0 in the overcommit sysctl (pool enabled). (Needed in 2.6.24 since it reverts a post-2.6.23 userspace-visible change) Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Acked-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Aravamudan 提交于
hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Acked-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
ecryptfs in 2.6.24-rc3 wasn't surviving fsx for me at all, dying after 4 ops. Generally, encountering problems with stale data and improperly zeroed pages. An extending truncate + write for example would expose stale data. With the changes below I got to a million ops and beyond with all mmap ops disabled - mmap still needs work. (A version of this patch on a RHEL5 kernel ran for over 110 million fsx ops) I added a few comments as well, to the best of my understanding as I read through the code. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Acked-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nathan Lynch 提交于
bloat-o-meter assumes that a '.' anywhere in a symbol's name means that it is static and prepends 'static.' to the first part of the symbol name, discarding the portion of the name that follows the '.'. However, the names of function entry points begin with '.' in the ppc64 ABI. This causes all function text size changes to be accounted to a single 'static.' entry in the output when comparing ppc64 kernels. Change getsizes() to ignore the first character of the symbol name when searching for '.'. Signed-off-by: NNathan Lynch <ntl@pobox.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shannon Nelson 提交于
We can't use the device in a dev_err() after a kzalloc failure or after the kfree, so simplify it to the pdev that was originally passed in. Cc: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shannon Nelson 提交于
A few fixups from Andrew's code comments. - removed "static inline" forward-declares - changed use of min() to min_t() - removed some unnecessary NULL initializations - removed a couple of BUG() calls Fixes this: drivers/dma/ioat_dma.c: In function `ioat1_tx_submit': drivers/dma/ioat_dma.c:177: sorry, unimplemented: inlining failed in call to '__ioat1_dma_memcpy_issue_pending': function body not available drivers/dma/ioat_dma.c:268: sorry, unimplemented: called from here Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
eCryptfs wasn't setting s_blocksize in it's superblock; just pick it up from the lower FS. Having an s_blocksize of 0 made things like "filefrag" which call FIGETBSZ unhappy. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Acked-by: NMike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
In some cases the IO subsystem is able to merge requests if the pages are adjacent in physical memory. This was achieved in the allocator by having expand() return pages in physically contiguous order in situations were a large buddy was split. However, list-based anti-fragmentation changed the order pages were returned in to avoid searching in buffered_rmqueue() for a page of the appropriate migrate type. This patch restores behaviour of rmqueue_bulk() preserving the physical order of pages returned by the allocator without incurring increased search costs for anti-fragmentation. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark Lord <mlord@pobox.com Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adam Jackson 提交于
These types define the size of data read from /dev/apm_bios. They should not be hidden behind #ifdef __KERNEL__. This is killing my xserver compile, apm_event_t is used in the xserver source. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
cpufreq_stats_free_table() mustn't be __cpuexit since it's called by the __cpuinit cpufreq_stat_cpu_callback(). This patch fixes the following section mismatch reported by Chris Clayton: WARNING: vmlinux.o(.init.text+0x143dd): Section mismatch: reference to .exit.text:cpufreq_stats_free_table (between 'cpufreq_stat_cpu_callback' and 'cpufreq_stats_init') Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Chris Clayton <chris2553@googlemail.com> Acked-by: NDave Jones <davej@codemonkey.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
The error handling code should undo the ioremap as well. The problem was detected using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2; constant C; int ret; @@ T E; ... * E = ioremap(...); if (E == NULL) S ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x1 = (T1)E if (...) { ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x2 = (T2)E ( * return; | * return C; | * return ret; ) } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Young 提交于
In kobject_register, the kobject reference is get in kobject_init, and then kobject_add. If kobject_add fail, it will only cleanup the reference got by itself. Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Greg KH <greg@kroah.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
Improve the error handling for mm/sparse.c::sparse_add_one_section(). And I see no reason to check 'usemap' until holding the 'pgdat_resize_lock'. [geoffrey.levand@am.sony.com: sparse_index_init() returns -EEXIST] Cc: Christoph Lameter <clameter@sgi.com> Acked-by: NDave Hansen <haveblue@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
Since sparse_index_alloc() can return NULL on memory allocation failure, we must deal with the failure condition when calling it. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jones 提交于
Ingo hit some BUG_ONs that were probably caused by these missing unlocks causing an unbalance. He couldn't reproduce the bug reliably, so it's unknown that it's definitly fixing the problem he hit, but it's a fairly good chance, and this fixes an obvious bug. [ Dave: "Ingo followed up that he hit some lockdep related output with this applied, so it may not be right. I'll look at it after xmas if no-one has it figured out before then." Akpm: "It looks pretty correct to me though." ] Signed-off-by: NDave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
This fixes some of the alpha-specific build problems, except a) modpost warning about COMMON symbol "saved_config" and b) nasty final link failure with gcc-4.x, -Os and scsi-disk driver configured built-in (due to jump table in .rodata referencing discarded .exit.text). - build failure with gcc-4.2.x: fix up casts in cia_io* routines to avoid warnings ('discards qualifiers from pointer target type'), which are failures, thanks to -Werror; - modpost warnings: add missing __init qualifier for titan and marvel; for non-generic build, move machine vectors from .data to .data.init.refok section; - unbreak CPU-specific optimization: rearrange cpuflags-y assignments so that extended -mcpu value (ev56, pca56, ev67) overrides basic one (ev5, ev6) and not vice versa. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andries E. Brouwer 提交于
As it turns out, the kernel divides by EXT3_INODES_PER_GROUP(s) when mounting an ext3 filesystem. If that number is zero, a crash follows. Below a patch. This crash was reported by Joeri de Ruiter, Carst Tankink and Pim Vullers. Cc: <linux-ext4@vger.kernel.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Uwe Kleine-König 提交于
This was introduced in 4af8e944c22d8af92a7548354a9567250cc1a782 Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geoff Levand 提交于
SPARSEMEM_VMEMMAP needs to be a selectable config option to support building the kernel both with and without sparsemem vmemmap support. This selection is desirable for platforms which could be configured one way for platform specific builds and the other for multi-platform builds. Signed-off-by: NMiguel Botón <mboton@gmail.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sheela 提交于
Share net is not supported, Rusty is an "idiot" . Signed-off-by: NSheela Sequeira <sheela.sequeira@gmail.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
ecryptfs_destroy_mount_crypt_stat() checks whether each auth_tok->global_auth_tok_key is nonzero and if so puts that key. However, in some early mount error paths nothing has initialized the pointer, and we try to key_put() garbage. Running the bad cipher tests in the testsuite exposes this, and it's happy with the following change. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
While auditing proc_doulongvec_ms_jiffies_minmax() usage in kernel, I found a bug in drivers/parport/procfs.c, incorrectly using sizeof(int) instead of sizeof(unsigned long) Only 64bit arches are affected by this old bug. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Reorder at32_rtc_probe() so that it's safe (no oopsing) to fire the IRQ handler the instant that it's registered. (Bug noted via "Debug shared IRQ handlers" kernel debug option.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <hcegtvedt@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
First of all, thanks to Bob Tracy <rct@frus.com> and Michael Cree <mcree@orcon.net.nz> for testing. Especially to Bob, as he has done titanic multi-day git-bisect work that finally helped to reproduce and nail down the bug (http://bugzilla.kernel.org/show_bug.cgi?id=9457). [ev6-]stxncpy.S: it's t12, not t2 register that is supposed to contain the last byte offset upon return. As a result of wrong register use (which was my fault back in 2003, IIRC), under some circumstances extra terminating zero bytes were added to destination string. This particularly led to incorrect DEVPATH strings generated in uevent and therefore to udev problems. strncpy.S: unrelated bug I found while testing the above fix - destination is not properly zero-padded then a byte count exceeds source length. Actually this is addition to strncpy fix from last year. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Bob Tracy <rct@frus.com> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislaw Gruszka 提交于
Sometimes when UML is debugged gdb miss breakpoints. When process traced by gdb do fork, debugger remove breakpoints from child address space. There is possibility to trace more than one fork, but this not work with UML, I guess (only guess) there is a deadlock - gdb waits for UML and UML waits for gdb. When clone() is called with SIGCHLD and CLONE_VM flags, gdb see this as PTRACE_EVENT_FORK not as PTRACE_EVENT_CLONE and remove breakpoints from child and at the same time from traced process, because either have the same address space. Maybe it is possible to do fix in gdb, but I'm not sure if there is easy way to find out if traced and child processes share memory. So I do fix for UML, it simply do not call clone() with both SIGCHLD and CLONE_VM flags together. Additionally __WALL flag is used for waitpid() to assure not miss clone and normal process events. [ jdike - checkpatch fixes ] Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Revert commit efa4d2fb ("Hibernation: Use temporary page tables for kernel text mapping on x86_64") because it causes my t61p to reboot right at the end of resume-from-disk. For reasons unknown at this time. Cc: Pavel Machek <pavel@ucw.cz> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
make[3]: *** No rule to make target `/usr/src/devel/include/linux/ticable.h', needed by `/usr/src/devel/usr/include/linux/ticable.h'. Stop. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
With ATAPI transfer chunk size properly programmed, libata PIO HSM should be able to handle full spurious data chunks. Also, it's a good idea to suppress trailing data warning for misc ATAPI commands as there can be many of them per command - for example, if the chunk size is 16 and the drive tries to transfer 510 bytes, there can be 31 trailing data messages. This patch makes the following updates to libata ATAPI PIO HSM implementation. * Make it drain full spurious chunks. * Suppress trailing data warning message for misc commands. * Put limit on how many bytes can be drained. * If odd, round up consumed bytes and the number of bytes to be drained. This gets the number of bytes to drain right for drivers which do 16bit PIO. This patch is partial backport of improve-ATAPI-data-xfer patchset pending for #upstream. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
While updating lbam/h for ATAPI commands, atapi_eh_request_sense() was left out. Update it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-