drivers/gpu/drm/i915/i915_drv.c|485 col 25| warning: symbol 'i915_pm_ops' was not declared. Should it be static?
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/i915_drv.c|100 col 18| warning: Initializer entry defined twice
drivers/gpu/drm/i915/i915_drv.c|101 col 3| also defined here
drivers/gpu/drm/i915/i915_drv.c|117 col 18| warning: Initializer entry defined twice
drivers/gpu/drm/i915/i915_drv.c|118 col 3| also defined here
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/i915_drv.h|676 col 19| warning: dubious bitfield without explicit `signed' or `unsigned'
drivers/gpu/drm/i915/i915_drv.h|712 col 19| warning: dubious bitfield without explicit `signed' or `unsigned'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Simple fix for error propagation along the old UMS path.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

checkpatch complains about this define:

WARNING: space prohibited between function name and open parenthesis '('
+#define   GEN6_RENDER TIMEOUT_COUNTER_EXPIRED		(1 << 6)
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

About 0.2W power can be saved on one HP laptop.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The hardware team suggest that the "large buffer" method should be
used to calculate the cursor watermark under non-SR state as well,
which is to avoid the flicker when FBC is enabled on Ironlake.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

In SR mode cursor plane watermark calculation uses same formula
like display plane. This one fixes the case for 965G and G45.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The total self-refresh fifo entry size for display plane is 512
instead of 128 for 965G. Also fix WM value mask for 965G.

About 1.0W power can be saved on one T61 laptop after the self-refresh
watermark is configured correctly.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

For self-refresh mode WM calculation's "line time" should use
mode's htotal instead of hdisplay. "surface width" is the hdisplay
for display plane and 64 for cursor plane.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This one adds support for eDP that connected on PCH DP-D port
instead of CPU DP-A port, and only DP-D port could be used for eDP.

https://bugs.freedesktop.org/show_bug.cgi?id=27220Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NJan-Hendrik Zab <jan@jhz.name>
Tested-by: NTemplar <templar@rshc.de>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Having two sets has made me think I caught a bug more than once now.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

When "onboard video memory" is set do "disabled" in BIOS on Asus P4P800-VM
board (i865G), kernel oopses with memory corruption:
https://bugs.freedesktop.org/show_bug.cgi?id=28430

Fix that by cleanly aborting the initialization.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Oops, when merging the extra details following an OOM, I missed that
driver_private is now NULL and the correct way to convert from the
drm_gem_object into the drm_i915_gem_object is to use to_intel_bo().

BUG: unable to handle kernel NULL pointer dereference at 00000069
IP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/virtual/vc/vcsa3/uevent

Pid: 10993, comm: X Not tainted 2.6.35-rc2+ #67 /
EIP: 0060:[<c11a4a02>] EFLAGS: 00213202 CPU: 0
EIP is at i915_gem_do_execbuffer+0x71f/0xbb6
EAX: f647e8a8 EBX: 00000000 ECX: 00000003 EDX: 00000000
ESI: 00424000 EDI: 00000000 EBP: f6508e48 ESP: f6508dd4
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process X (pid: 10993, ti=f6508000 task=f6432880 task.ti=f6508000)
Stack:
 f6508de0 f7130000 00000001 00000000 00000000 f647e8a8 00000000 f64f8480
<0> f7974414 00000000 00000006 00000000 00000000 f6578000 00000008 00000006
<0> f6797880 00400000 00000000 ffffffe4 f7974400 000000d0 000000d0 000001c0
Call Trace:
 [<c11a4f3a>] ? i915_gem_execbuffer2+0xa1/0xe7
 [<c118ab96>] ? drm_ioctl+0x22c/0x2fa
 [<c11a4e99>] ? i915_gem_execbuffer2+0x0/0xe7
 [<c107e88c>] ? do_sync_read+0x8f/0xca
 [<c1088cbd>] ? vfs_ioctl+0x2c/0x96
 [<c118a96a>] ? drm_ioctl+0x0/0x2fa
 [<c10891f4>] ? do_vfs_ioctl+0x429/0x45a
 [<c107e5c9>] ? fsnotify_access+0x54/0x5f
 [<c107ee1c>] ? vfs_read+0x9a/0xae
 [<c1089258>] ? sys_ioctl+0x33/0x4d
 [<c1002610>] ? sysenter_do_call+0x12/0x26
Code: d0 89 4d c4 31 c9 89 45 d8 eb 44 8b 45 cc 8b 14 88 8b 42 50 89 45
bc 8b 45 a0 8b 52 38 89 55 d0 31 d2 f6 40 20 01 74 0d 8b 55 bc <f6> 42
69 30 0f 95 c2 0f b6 d2 8b 45 d0 c7 45 d4 00 00 00 00 89
EIP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 SS:ESP 0068:f6508dd4
CR2: 0000000000000069
---[ end trace 3f1d514b34d39381 ]---
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

On some machines (currently only the Toshiba Tecra A11 is known), the GPU
locks up when modeset is forced on LID open. This patch adds a new DMI
blacklist and omits modesetting for all matches.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15550Signed-off-by: NThomas Bächler <thomas@archlinux.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

* 'nouveau/for-airlied' of ../drm-nouveau-next: (77 commits)
  drm/nouveau: set TASK_(UN)INTERRUPTIBLE before schedule_timeout()
  drm/nv50: fix some not-error error messages
  drm/nouveau: introduce gpio engine
  drm/nv50: correct wait condition for instmem flush
  drm/nouveau: Fix TV-out detection on unposted cards lacking a usable DCB table.
  drm/nouveau: Get rid of the remaining VGA CRTC locking.
  drm/nouveau: Move display init to a new nouveau_engine.
  drm/nouveau: Put back the old 2-messages I2C slave test.
  drm/nouveau: Reset AGP before running the init scripts.
  drm/nv30: Init the PFB+0x3xx memory timing regs.
  drm/nouveau: disable hotplug detect around DP link training
  drm/nv50: add function to control GPIO IRQ reporting
  drm/nouveau: add nv_mask register accessor
  drm/nouveau: fix build without CONFIG_ACPI
  drm/nouveau: Reset CRTC owner to 0 before BIOS init.
  drm/nouveau: No need to lock/unlock the VGA CRTC regs all the time.
  drm/nouveau: Remove useless CRTC_OWNER logging.
  drm/nouveau: Add some generic I2C gadget detection code.
  drm/i2c/ch7006: Don't assume that the specified config points to static memory.
  drm/nv04-nv3x: Implement init-compute-mem.
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_bios.c

* 'drm-radeon-next' of ../drm-radeon-next: (333 commits)
  drm/radeon/kms: trivial code style fixes for audio
  drm/radeon: remove viewport transform from r6xx/r7xx blit emit
  drm/radeon: group r6xx/r7xx newly sequential blit state
  drm/radeon: reorder r6xx/r7xx blit state emit to make more regs sequential
  drm/radeon: r6xx/r7xx move vport clipping to a single packet
  drm/radeon: group r6xx/r7xx sequential blit state
  drm/radeon: remove duplicate state emit in r6xx/r7xx blit
  drm/radeon: add comments to r6xx/r7xx blit state
  drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush
  drm/radeon/kms: remove rs4xx gart limit
  drm: radeon: fix sign bug
  drm/radeon/kms: check/restore sanity before doing anything else with GPU.
  drm/radeon: fall back to GTT if bo creation/validation in VRAM fails.
  drm/radeon/kms: add ioport register access
  drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740
  drm/radeon/kms: track audio engine state, do not use not setup timer
  drm/radeon/kms/r6xx+: add query for tile config (v2)
  drm/radeon/kms: fix CS alignment checking for tiling (v2)
  drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xx
  drm/radeon/kms: Add crtc tiling setup support for evergreen
  ...

sil164 transmitters are used for DVI outputs on Intel/nvidia and ATI setups.

So far only nouveau can use this driver.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Tested-by: NPatrice Mandin <patmandin@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace, macro and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace, macro and spacing coding style issues.
Simplified
 -if (ret) return ret;
 -return 0;
 +return ret;
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace, macro and spacing coding style issues, and a C99 comment.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The device name is tightly coupled and created at the same time as the
master->unique address, so we need to free it with the master. Currently
we overwrite it each time we create a new master:

unreferenced object 0xe32c54b0 (size 32):
  comm "Xorg", pid 1455, jiffies 4294721798 (age 3196.879s)
  hex dump (first 32 bytes):
    69 39 31 35 40 70 63 69 3a 30 30 30 30 3a 30 30  i915@pci:0000:00
    3a 30 32 2e 30 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  :02.0.kkkkkkkkk.
  backtrace:
    [<c04e5657>] create_object+0x124/0x1f1
    [<c07cf0f0>] kmemleak_alloc+0x4c/0x90
    [<c04db84c>] __kmalloc+0x155/0x175
    [<f8316665>] drm_setversion+0x11d/0x1b1 [drm]
    [<f83148d4>] drm_ioctl+0x29a/0x356 [drm]
    [<c04f27c4>] vfs_ioctl+0x33/0x91
    [<c04f31cf>] do_vfs_ioctl+0x46b/0x496
    [<c04f3240>] sys_ioctl+0x46/0x66
    [<c040325f>] sysenter_do_call+0x12/0x38
    [<ffffffff>] 0xffffffff
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

/* A typical clean-up sequence for objects stored in an idr tree, will
 * use idr_for_each() to free all objects, if necessary, then
 * idr_remove_all() to remove all ids, and idr_destroy() to free
 * up the cached idr_layers.
 */

We were missing the vital idr_rmove_all() step and so were leaking
the used layers for every dri client:

unreferenced object 0xf32133c0 (size 148):
  comm "plymouthd", pid 131, jiffies 4294678490 (age 2308.030s)
  hex dump (first 32 bytes):
    04 00 00 00 00 00 00 00 00 00 00 00 00 40 19 f3  .............@..
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<c04e5657>] create_object+0x124/0x1f1
    [<c07cf100>] kmemleak_alloc+0x4c/0x90
    [<c04db6a9>] kmem_cache_alloc+0xee/0x13c
    [<c05c3d25>] idr_pre_get+0x24/0x61
    [<f8315c9c>] drm_gem_handle_create+0x27/0x7f [drm]
    [<f89925b2>] i915_gem_create_ioctl+0x4f/0x71 [i915]
    [<f83148ac>] drm_ioctl+0x272/0x356 [drm]
    [<c04f27c4>] vfs_ioctl+0x33/0x91
    [<c04f31cf>] do_vfs_ioctl+0x46b/0x496
    [<c04f3240>] sys_ioctl+0x46/0x66
    [<c040325f>] sysenter_do_call+0x12/0x38
    [<ffffffff>] 0xffffffff

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15803Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

set_current_state() is called only once before the first iteration.
After return from schedule_timeout() current state is TASK_RUNNING. If
we are going to wait again, set_current_state() must be called.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Trivial fix to set y1 = y2 = 0.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We aren't using it, so no need.  Save additional dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

group state that is emitted sequentially into fewer packets.
This saves a number of dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Saves lots of dwords in blit emit
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

group state that is emitted sequentially into fewer packets.
This saves a number of dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations.  Add workaround.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>