- 15 8月, 2005 3 次提交
-
-
由 Linus Torvalds 提交于
It introduces a repeatable oops in the driver, which is a bigger problem than the patch tries to solve. From the original description: Author: Jamie Lenehan <lenehan@twibble.org> Date: Thu Mar 3 14:41:40 2005 +0200 [PATCH] dc395x: Fix support for highmem From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Removes the page_to_virt and maps sg lists dynamically. This makes the driver work with highmem pages. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NJamie Lenehan <lenehan@twibble.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steve French 提交于
Fix path name conversion for long filenames when mapchars mount option was specified at mount time. Signed-off-by: Steve French (sfrench@us.ibm.com) Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steve French 提交于
Fix missing entries in search results when very long file names and more than 50 (or so) of such long search entries in the directory. FindNext could send corrupt last byte of resume name when resume key was a few hundred bytes long file name or longer. Fixes Samba Bug # 2932 Signed-off-by: Steve French (sfrench@us.ibm.com) Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 8月, 2005 3 次提交
-
-
由 Jan Kara 提交于
Initialize key object ID in inode so that we don't try to remove the inode when we fail on some checks even before we manage to allocate something. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mundt 提交于
There was a rather silly and embarrassing typo in the sh _syscall6(). For the syscall ABI we have the trapa value specified as 0x10 + number of arguments, this was being set incorrectly in the _syscall6() case which ended up causing some problems for users. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This leaves the issue of whether we should deprecate the whole thing (or if we should check the whole mmap range, for that matter) open. Just do the minimal fix for now.
-
- 13 8月, 2005 3 次提交
-
-
由 Evgeniy Polyakov 提交于
Do not spam syslog each 10 seconds when there is nothing on the wire. Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Eric W. Biederman 提交于
Oops. I knew I didn't have the physical versus logical cpu identifiers right when I generated that patch. It's not nearly as bad as I feared at the time though. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 8月, 2005 10 次提交
-
-
由 Matt Mackall 提交于
Remove unused variable Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
This fixes a race during initialization with the NAPI softirq processing by using an RCU approach. This race was discovered when refill_skbs() was added to the setup code. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ingo Molnar 提交于
we could do one thing (see the patch below): i think it would be useful to fill up the netlogging skb queue straight at initialization time. Especially if netpoll is used for dumping alone, the system might not be in a situation to fill up the queue at the point of crash, so better be a bit more prepared and keep the pipeline filled. [ I've modified this to be called earlier - mpm ] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
Add limited retry logic to netpoll_send_skb Each time we attempt to send, decrement our per-device retry counter. On every successful send, we reset the counter. We delay 50us between attempts with up to 20000 retries for a total of 1 second. After we've exhausted our retries, subsequent failed attempts will try only once until reset by success. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
Minor netpoll_send_skb restructuring Restructure to avoid confusing goto and move some bits out of the retry loop. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
Suggested by Steven Rostedt, matches his patch included in e100. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Moyer 提交于
This fixes an obvious deadlock in the netpoll code. netpoll_rx takes the npinfo->rx_lock. netpoll_rx is also the only caller of arp_reply (through __netpoll_rx). As such, it is not necessary to take this lock. Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Moyer 提交于
Initialize npinfo->rx_flags. The way it stands now, this will have random garbage, and so will incur a locking penalty even when an rx_hook isn't registered and we are not active in the netpoll polling code. Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
There are many instances of skb->protocol = htons(ETH_P_*); skb->protocol = __constant_htons(ETH_P_*); and skb->protocol = *_type_trans(...); Most of *_type_trans() are already endian-annotated, so, let's shift attention on other warnings. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Stezenbach 提交于
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 8月, 2005 14 次提交
-
-
由 Herbert Xu 提交于
Well I've only found one potential cause for the assertion failure in tcp_mark_head_lost. First of all, this can only occur if cnt > 1 since tp->packets_out is never zero here. If it did hit zero we'd have much bigger problems. So cnt is equal to fackets_out - reordering. Normally fackets_out is less than packets_out. The only reason I've found that might cause fackets_out to exceed packets_out is if tcp_fragment is called from tcp_retransmit_skb with a TSO skb and the current MSS is greater than the MSS stored in the TSO skb. This might occur as the result of an expiring dst entry. In that case, packets_out may decrease (line 1380-1381 in tcp_output.c). However, fackets_out is unchanged which means that it may in fact exceed packets_out. Previously tcp_retrans_try_collapse was the only place where packets_out can go down and it takes care of this by decrementing fackets_out. So we should make sure that fackets_out is reduced by an appropriate amount here as well. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 James Bottomley 提交于
We have a chek in there to make sure that the name won't overflow task_struct.comm[], but it's triggering for scsi with lots of HBAs, only scsi is using single-threaded workqueues which don't append the "/%d" anyway. All too hard. Just kill the BUG_ON. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> [ kthread_create() uses vsnprintf() and limits the thing, so no actual overflow can actually happen regardless ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steven Whitehouse 提交于
Signed-off-by: NSteven Whitehouse <steve@chygwyn.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pierre Ossman 提交于
Even though the changes are minor for the next release an increasing version number simplifies my support issues. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
The workaround for broken device-tree that prevents fan control from working on recent G5 models need to be "enabled" for machines with revision 0x37 of the bridge in addition to machines with revision 0x35. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Alexander Nyberg 提交于
Need to use list_for_entry_safe(), as we're removing items during the traversal. list_for_each_entry() uses the first ptr also as an iterator, if you kfree() it slab takes it, might poison it and then you try to use it to iterate to the next object in list. Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ralf Baechle DL5RB 提交于
Fix the p-persistence CSMA algorithm which in simplex mode was starting with a slottime delay before doing anything else as if there was carrier collision resulting in bad performance on simplex links. Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org> Acked-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tejun Heo 提交于
Yet another hack due to the fact that libata is the only user of SCSI's ->eh_strategy_handler() hook.
-
由 Tejun Heo 提交于
sata_sx4 directly references sg->length to calculate total_len in pdc20621_dma_prep(). This is incorrect as dma_map_sg() could have merged multiple sg's into one and, in such case, sg->length doesn't reflect true size of the entry. This patch makes it use sg_dma_len(sg). Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Linus Torvalds 提交于
-
- 10 8月, 2005 7 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Rename the s3c2410_report_oc() to s3c2410_usb_report_oc() as this is an usb specific function. Change port power on the usb-simtec implementation to only power up the output if both are set, as per the usb 1.1 specification Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Documentation for the in-built OHCI host controller and the support for it in Linux. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Unfortunately, we can't use the "user" bit in the page tables to control whether a page table entry is "global" or "asid" specific, since the vector page is mapped as "user" accessible but is not process specific. Therefore, give direct control of the ARMv6 "nG" (not global) bit to the mm layers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Ensure that the exclusive monitor is cleared on context switch with ARMv6 CPUs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-