When the last DS io is processed, the data server client record will be
freed.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare to put a dis-connected DS client record.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Let the MDS know that you are redirecting I/O from pNFS to MDS.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The DS has a connection error (invalid deviceid). Drain the fore channel
slot table waitq.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state.
Reset the task for io through the MDS if the deviceid is invalid.

The reset functions put the io pages through the pageio layer which has the
advantage of re-coalescing which allows for the MDS and DS having different
r/wsizes. Exit the awakened task without executing the rpc_call_done routine.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replaced by filelayout_reset_write and filelayout_reset_read
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.

Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Set the recovery parameters for data servers.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS
file layout to quickly try the MDS or perhaps another DS.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The invalid layout bits are should only be used to block LAYOUTGETs.

Do not invalidate a layout on deviceid invalidation.
Do not invalidate a layout on un-handled READ, WRITE, COMMIT errors.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the invalid deviceid test into nfs4_fl_prepare_ds, called by the
filelayout read, write, and commit routines. NFS4_DEVICE_ID_NEG_ENTRY
is no longer needed.
Remove redundant printk's - filelayout_mark_devid_invalid prints a KERN_WARNING.

An invalid device prevents pNFS io.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Simplified error gotos to make it slightly easier to read,
it doesn't affect the functionality of the routine.
Signed-off-by: NMatthew Treinish <treinish@linux.vnet.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We can't create new files or directories here from userspace, so let's
not pretend that this directory is writable.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Most users will use NFS v3 or possibly v4 so this makes it easier for
them.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

With this patch NFS v2 can be disabled during Kconfig.  I default the
option to "y" to match the current behavior.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In theory, NFS v3 can have different error versions than NFS v2. v4 is
already using its own nfs4_stat_to_errno() to map error codes, so
rather than create something in the generic client for v2 and v3 to
share I instead give v3 its own function.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This allows me to use the filehandle allocated in nfs_fs_mount() for nfs
v4 mounts instead of allocating a new one.  Rather than change
nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead
remove the function.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This new function chooses between the v2/3 parser and the v4 parser by
filesystem type.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The v2/3 and v4 cases were very similar, with just a few parameters
changed.  This makes it easy to share code.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This function returns the same same return type as nfs4_try_mount() so
they two can be more easily substituted.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This field is unconditionally set while parsing mount data, so there is
no need to fill it in here.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

At this point, there are only a few small differences between these two
functions.  I can set a few function pointers in the nfs_mount_info
struct to get around these differences.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The only difference between nfs_xdev_mount() and nfs4_xdev_mount() is the
clone_super() function called to clone the super block.  I can combine
these two functions by using the fill_super field in the mount_info
structure.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nfs4_remote_mount() function was only slightly different from the
nfs_fs_mount() function used by the generic client.  I created a new
nfs_mount_info structure to set different parameters to help combine
these functions.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This flag is numerically equivalent to NFS_MOUNT_UNSHARED, so I can
remove it to make collapsing functions more straightforward.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I intend on creating a single nfs_fs_mount() function used by all our
mount paths.  To avoid checking between new mounts and clone mounts, I
instead pass both structures to a new function in super.c that finds the
cache key and then looks up the super cookie.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch splits out the NFS v4 specific functionality of
nfs4_get_root() into its own rpc_op called by the generic client, and
leaves nfs4_proc_get_rootfh() as its own stand alone function.  This
also allows me to change nfs4_remote_mount(), nfs4_xdev_mount() and
nfs4_remote_referral_mount() to use the generic client's nfs_get_root()
function.  Later patches in this series will collapse these functions
into one common function, so using the same get_root() function
everywhere simplifies future changes.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This function is really getting the root filehandle and not the root
dentry of the filesystem.  I also removed the rpc_ops lookup from
nfs4_get_rootfh() under the assumption that if we reach this function
then we already know we are using NFS v4.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Function rename to ensure that the functionality of nfs_unlock_request()
mirrors that of nfs_lock_request(). Then let nfs_unlock_and_release_request()
do the work of what used to be called nfs_unlock_request()...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

We only have two places where we need to grab a reference when trying
to lock the nfs_page. We're better off making that explicit.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

We now hold a reference to the nfs_page across the calls to
nfs_set_page_writeback and nfs_end_page_writeback, and that
means we already have a reference to the struct page.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

We have to unlock the nfs_page before we call nfs_end_page_writeback
to avoid races with functions that expect the page to be unlocked
when PG_locked and PG_writeback are not set.
The problem is that nfs_unlock_request also releases the nfs_page,
causing a deadlock if the release of the nfs_open_context
triggers an iput() while the PG_writeback flag is still set...

The solution is to separate the unlocking and release of the nfs_page,
so that we can do the former before nfs_end_page_writeback and the
latter after.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Since even filemap_flush() needs to lock pages that are dirty, we
cannot risk calling it from the state manager context. Therefore,
we need to move the call to filemap_flush() to
nfs_async_inode_return_delegation().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The assumption is that if you are in a situation where you need to
return the delegation, then you should probably stop caching the
data anyway.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we hold a delegation then we know that it should be safe to continue
to cache the data beyond the close(). However since the process that wrote
the data may die after close(), we may still want to send the data to
server before those RPCSEC_GSS credentials expire. We therefore compromise
by starting writeback to the server, but don't wait for completion.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix the following sparse warnings:

fs/nfs/direct.c:221:6: warning: symbol 'nfs_direct_readpage_release' was
not declared. Should it be static?
fs/nfs/read.c:38:43: warning: non-ANSI function declaration of function
'nfs_readhdr_alloc'
fs/nfs/objlayout/objio_osd.c:214:5: warning: symbol '__alloc_objio_seg'
was not declared. Should it be static?
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>