- 29 1月, 2009 3 次提交
-
-
由 Adrian Hunter 提交于
- preserve the idx_gc list - it will be needed in the same state, should UBIFS be remounted rw again - prevent remounting ro if we have switched to read only mode (due to a fatal error) Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
All writes go through wbufs so they must be sync'd after syncing inodes and pages. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 28 1月, 2009 1 次提交
-
-
由 Adrian Hunter 提交于
The function to traverse and dirty the LPT was still not dirtying all nodes, with the result that the LPT could run out of space. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 27 1月, 2009 2 次提交
-
-
由 Artem Bityutskiy 提交于
When data CRC checking is disabled, UBIFS returns incorrect return code from the 'try_read_node()' function (0 instead of 1, which means CRC error), which make the caller re-read the data node again, but using a different code patch, so the second read is fine. Thus, we read the same node twice. And the result of this is that UBIFS is slower with no_chk_data_crc option than it is with chk_data_crc option. This patches fixes the problem. Reported-by: NReuben Dowle <Reuben.Dowle@navico.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
I introduce wrong assertions in one of the previous commits, this patch fixes them. Also, initialize debugfs after the debugging check. This is a little nicer because we want the FS data to be accessible to external users after everything has been initialized. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 26 1月, 2009 5 次提交
-
-
由 Adrian Hunter 提交于
When mounting read-only the orphan area head is not initialized. It must be initialized when remounting read/write, but it was not. This patch fixes that. [Artem: sorry, added comment tweaking noise] Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
When we mount UBIFS, GC LEB may contain out-of-date information, and UBIFS should update lprops and set free space for thei LEB. Currently UBIFS does this only if mounted R/W. But for R/O mount we have to do the same, because otherwise we will have incorrect FS free space reported to user-space. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
We observe space corrupted accounting when re-mounting. So add some debbugging checks to catch problems like this. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
When freeing the c->idx_lebs list, we have to release the LEBs as well, because we might be called from mount to read-only mode code. Otherwise the LEBs stay taken forever, which may cause problems when we re-mount back ro RW mode. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
This patch simplifies lock_[23]_inodes functions. We do not have to care about locking order, because UBIFS does this for @i_mutex and this is enough. Thanks to Al Viro for suggesting this. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 20 1月, 2009 2 次提交
-
-
由 Artem Bityutskiy 提交于
Just add more commentaries. Also some commentary fixes for lprops flags. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS wrongly tells UBI that all data is short term. Use proper hints instead. Thanks to Xiaochuan-Xu for noticing this. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 18 1月, 2009 2 次提交
-
-
由 Artem Bityutskiy 提交于
Mark super, file, and inode operation structcutes with 'const'. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
VFS calls '->sync_fs()' twice - first time with @wait = 0, second time with @wait = 1. As a result, we may commit and synchronize write-buffers twice. Avoid doing this by returning immediatelly if @wait = 0. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 07 1月, 2009 1 次提交
-
-
由 Artem Bityutskiy 提交于
WB_SYNC_HOLD is going to be zapped so we should not use it. Use %WB_SYNC_NONE instead. Here is what akpm said: "I think I'll just switch that to WB_SYNC_NONE. The `wait==0' mode is just an advisory thing to help the fs shove lots of data into the queues. If some gets missed then it'll be picked up on the second ->sync_fs call, with wait==1." Thanks to Randy Dunlap for catching this. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2009 1 次提交
-
-
由 Frederik Schwarzer 提交于
- (better, more, bigger ...) then -> (...) than Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 1月, 2009 1 次提交
-
-
由 Nick Piggin 提交于
With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: NNick Piggin <npiggin@suse.de> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 12月, 2008 15 次提交
-
-
由 Artem Bityutskiy 提交于
Print node sizes and maximum node sizes. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
We cannot use ubifs_err() macro with DBGKEY() and DBGKEY1(), because this is racy and holding dbg_lock is needed. Use dbg_err() instead, which does have the lock held. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
It is fine if there is not free space - we should still allow mounting this FS. This patch relaxes the free space requirements and adds info dumps. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS does not disable compression if ui->flags is non-zero, e.g. if the file has "sync" flag. This is because of the typo which is fixed by this patch. The patch also adds a couple of useful debugging prints. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
These are mostly long lines and wrong indentation warning fixes. But also there are two volatile variables and checkpatch.pl complains about them: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt + volatile int gc_seq; WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt + volatile int gced_lnum; Well, we anyway use smp_wmb() for c->gc_seq and c->gced_lnum, so these 'volatile' modifiers can be just dropped. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
fs/ubifs/compress.c:111:8: warning: incorrect type in argument 5 (different signedness) fs/ubifs/compress.c:111:8: expected unsigned int *dlen fs/ubifs/compress.c:111:8: got int *out_len fs/ubifs/compress.c:175:10: warning: incorrect type in argument 5 (different signedness) fs/ubifs/compress.c:175:10: expected unsigned int *dlen fs/ubifs/compress.c:175:10: got int *out_len Fix this by adding a cast to (unsigned int *). We guarantee that our lengths are small and no overflow is possible. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
The 'make_free_space()' function was too complex and this patch simplifies it. It also fixes a bug - the freespace test failed straight away on UBI volumes with 512 bytes LEB size. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Do not force UBIFS return 0 used space when it is empty. It leads to a situation when creating any file immediately produces tens of used blocks, which looks very weird. It is better to be honest and say that some blocks are used even if the FS is empty. And ext2 does the same. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS stores uncommitted index size in c->budg_uncommitted_idx, and this affect budgeting calculations. When mounting and replaying, this variable is not updated, so we may end up with "over-budgeting". This patch fixes the issue. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS commits on unmount to make the next mount faster. Currently, it commits only if there is more than LEB size bytes in the journal. This is not very good, because journal size may be large (512KiB). And there may be few deletions in the journal which do not take much journal space, but which do introduce a lot of TNC changes and make mount slow. Thus, jurt remove this condition and always commit. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBI now has (fake for now, though) synchronization call - use it. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Always run commit in sync_fs, because even if the journal seems to be almost empty, there may be a deletion which removes a large file, which affects the index greatly. And because we want better free space predictions after 'sync_fs()', we have to commit. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Argh. The ->sync_fs call is called _before_ all inodes are flushed. This means we first sync write buffers and commit, then all inodes are synced, and we end up with unflushed write buffers! Fix this by forcing synching all indoes from 'ubifs_sync_fs()'. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
The c->min_idx_lebs constant depends on c->old_idx_sz, which is read from the master node. This means that we have to initialize c->min_idx_lebs only after we have read the master node. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 23 12月, 2008 7 次提交
-
-
由 Artem Bityutskiy 提交于
Do not calculate min_idx_lebs, because it is available in c->min_idx_lebs Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
When we commit, but before we try to write anything to the flash media, @c->min_idx_size is inaccurate, because we do not re-calculate it after the commit. Do not forget to do this. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Instead of using do_div(), use better primitives from linux/math64.h. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Take into account that 2 eraseblocks are never available because they are reserved for the index. This gives more realistic count of FS blocks. To avoid future confusions like this, introduce a constant. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Dump available space calculated by budgeting subsystem. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
debugfs tnc dumping was broken because of an obvious typo. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-