- 16 2月, 2011 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits) dmaengine: add slave-dma maintainer dma: ipu_idmac: do not lose valid received data in the irq handler dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg() dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop() dmaengine: imx-sdma: return sdmac->status in sdma_tx_status() dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg() dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg() dmaengine i.MX dma: initialize dma capabilities outside channel loop dmaengine i.MX DMA: do not initialize chan_id field dmaengine i.MX dma: check sg entries for valid addresses and lengths dmaengine i.MX dma: set maximum segment size for our device dmaengine i.MX SDMA: reserve channel 0 by not registering it dmaengine i.MX SDMA: initialize dma capabilities outside channel loop dmaengine i.MX SDMA: do not initialize chan_id field dmaengine i.MX sdma: check sg entries for valid addresses and lengths dmaengine i.MX sdma: set maximum segment size for our device DMA: PL08x: fix channel pausing to timeout rather than lockup DMA: PL08x: fix infinite wait when terminating transfers dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie() dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0 ...
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: nfsd: break lease on unlink due to rename nfsd4: acquire only one lease per file nfsd4: modify fi_delegations under recall_lock nfsd4: remove unused deleg dprintk's. nfsd4: split lease setting into separate function nfsd4: fix leak on allocation error nfsd4: add helper function for lease setup nfsd4: split up nfsd_break_deleg_cb NFSD: memory corruption due to writing beyond the stat array NFSD: use nfserr for status after decode_cb_op_status nfsd: don't leak dentry count on mnt_want_write failure
-
由 Linus Torvalds 提交于
Merge branches 'core-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "lockdep, timer: Fix del_timer_sync() annotation" * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timer debug: Hide kernel addresses via %pK in /proc/timer_list
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix text_poke_smp_batch() deadlock perf tools: Fix thread_map event synthesizing in top and record watchdog, nmi: Lower the severity of error messages ARM: oprofile: Fix backtraces in timer mode oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, dmi, debug: Log board name (when present) in dmesg/oops output x86, ioapic: Don't warn about non-existing IOAPICs if we have none x86: Fix mwait_usable section mismatch x86: Readd missing irq_to_desc() in fixup_irq() x86: Fix section mismatch in LAPIC initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: matrix_keypad - increase the limit of rows and columns Input: wacom - fix error path in wacom_probe() Input: ads7846 - check proper condition when freeing gpio Revert "Input: do not pass injected events back to the originating handler" Input: sysrq - rework re-inject logic Input: serio - clear pending rescans after sysfs driver rebind Input: rotary_encoder - use proper irqflags Input: wacom_w8001 - report resolution to userland
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: get rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu() drop out of RCU in return_reval split do_revalidate() into RCU and non-RCU cases in do_lookup() split RCU and non-RCU cases of need_revalidate nothing in do_follow_link() is going to see RCU
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check return value of alloc_extent_map() Btrfs - Fix memory leak in btrfs_init_new_device() btrfs: prevent heap corruption in btrfs_ioctl_space_info() Btrfs: Fix balance panic Btrfs: don't release pages when we can't clear the uptodate bits Btrfs: fix page->private races
-
- 15 2月, 2011 18 次提交
-
-
由 Martin Schwidefsky 提交于
task_show_regs used to be a debugging aid in the early bringup days of Linux on s390. /proc/<pid>/status is a world readable file, it is not a good idea to show the registers of a process. The only correct fix is to remove task_show_regs. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
can't happen anymore and didn't work right anyway Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... thus killing the need to handle drop-from-RCU in d_revalidate() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
fixing oopsen in lookup_one_len() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
and use unlikely() instead of gotos, for fsck sake... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Naga Chumbalkar 提交于
The "Type 2" SMBIOS record that contains Board Name is not strictly required and may be absent in the SMBIOS on some platforms. ( Please note that Type 2 is not listed in Table 3 in Sec 6.2 ("Required Structures and Data") of the SMBIOS v2.7 Specification. ) Use the Manufacturer Name (aka System Vendor) name. Print Board Name only when it is present. Before the fix: (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6 After the fix: (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6 Signed-off-by: NNaga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: <stable@kernel.org> # .3x - good for debugging, please apply as far back as it applies cleanly LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul Bolle 提交于
mp_find_ioapic() prints errors like: ERROR: Unable to locate IOAPIC for GSI 13 if it can't find the IOAPIC that manages that specific GSI. I see errors like that at every boot of a laptop that apparently doesn't have any IOAPICs. But if there are no IOAPICs it doesn't seem to be an error that none can be found. A solution that gets rid of this message is to directly return if nr_ioapics (still) is zero. (But keep returning -1 in that case, so nothing breaks from this change.) The call chain that generates this error is: pnpacpi_allocated_resource() case ACPI_RESOURCE_TYPE_IRQ: pnpacpi_parse_allocated_irqresource() acpi_get_override_irq() mp_find_ioapic() Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
-
由 Linus Torvalds 提交于
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR ARM: 6658/1: collie: do actually pass locomo_info to locomo driver ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL ARM: 6654/1: perf/oprofile: fix off-by-one in stack check ARM: fixup SMP alternatives in modules ARM: make SWP emulation explicit on !CPU_USE_DOMAINS ARM: Avoid building unsafe kernels on OMAP2 and MX3 ARM: pxa: Properly configure PWM period for palm27x ARM: pxa: only save/restore registers when pm functions are defined ARM: pxa/colibri: use correct SD detect pin ARM: pxa: fix mfpr_sync to read from valid offset
-
由 Tsutomu Itoh 提交于
I add the check on the return value of alloc_extent_map() to several places. In addition, alloc_extent_map() returns only the address or NULL. Therefore, check by IS_ERR() is unnecessary. So, I remove IS_ERR() checking. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Ilya Dryomov 提交于
Memory allocated by calling kstrdup() should be freed. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Rosenberg 提交于
Commit bf5fc093 refactored btrfs_ioctl_space_info() and introduced several security issues. space_args.space_slots is an unsigned 64-bit type controlled by a possibly unprivileged caller. The comparison as a signed int type allows providing values that are treated as negative and cause the subsequent allocation size calculation to wrap, or be truncated to 0. By providing a size that's truncated to 0, kmalloc() will return ZERO_SIZE_PTR. It's also possible to provide a value smaller than the slot count. The subsequent loop ignores the allocation size when copying data in, resulting in a heap overflow or write to ZERO_SIZE_PTR. The fix changes the slot count type and comparison typecast to u64, which prevents truncation or signedness errors, and also ensures that we don't copy more data than we've allocated in the subsequent loop. Note that zero-size allocations are no longer possible since there is already an explicit check for space_args.space_slots being 0 and truncation of this value is no longer an issue. Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NJosef Bacik <josef@redhat.com> Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Mark the cloned backref_node as checked in clone_backref_node() Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: Revert "dt: add documentation of ARM dt boot interface"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Fix minor compile warning RTC: Convert rtc drivers to use the alarm_irq_enable method RTC: Fix rtc driver ioctl specific shortcutting
-
由 Chris Mason 提交于
Btrfs tracks uptodate state in an rbtree as well as in the page bits. This is supposed to enable us to use block sizes other than the page size, but there are a few parts still missing before that completely works. But, our readpage routine trusts this additional range based tracking of uptodateness, much in the same way the buffer head up to date bits are trusted for the other filesystems. The problem is that sometimes we need to allocate memory in order to split records in the rbtree, even when we are just clearing bits. This can be difficult when our clearing function is called GFP_ATOMIC, which can happen in the releasepage path. So, what happens today looks like this: releasepage called with GFP_ATOMIC btrfs_releasepage calls clear_extent_bit clear_extent_bit fails to allocate ram, leaving the up to date bit set btrfs_releasepage returns success The end result is the page being gone, but btrfs thinking the range is up to date. Later on if someone tries to read that same page, the btrfs readpage code will return immediately thinking the page is already up to date. This commit fixes things to fail the releasepage when we can't clear the extent state bits. It covers both data pages and metadata tree blocks. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
There is a race where btrfs_releasepage can drop the page->private contents just as alloc_extent_buffer is setting up pages for metadata. Because of how the Btrfs page flags work, this results in us skipping the crc on the page during IO. This patch sovles the race by waiting until after the extent buffer is inserted into the radix tree before it sets page private. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 14 2月, 2011 14 次提交
-
-
由 J. Bruce Fields 提交于
4795bb37 "nfsd: break lease on unlink, link, and rename", only broke the lease on the file that was being renamed, and didn't handle the case where the target path refers to an already-existing file that will be unlinked by a rename--in that case the target file should have any leases broken as well. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Instead of acquiring one lease each time another client opens a file, nfsd can acquire just one lease to represent all of them, and reference count it to determine when to release it. This fixes a regression introduced by c45821d2 "locks: eliminate fl_mylease callback": after that patch, only the struct file * is used to determine who owns a given lease. But since we recently converted the server to share a single struct file per open, if we acquire multiple leases on the same file from nfsd, it then becomes impossible on unlocking a lease to determine which of those leases (all of whom share the same struct file *) we meant to remove. Thanks to Takashi Iwai <tiwai@suse.de> for catching a bug in a previous version of this patch. Tested-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Modify fi_delegations only under the recall_lock, allowing us to use that list on lease breaks. Also some trivial cleanup to simplify later changes. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
These aren't all that useful, and get in the way of the next steps. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Splitting some code into a separate function which we'll be adding some more to. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Also share some common exit code. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
We'll be adding some more code here soon. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Konstantin Khorenko 提交于
If nfsd fails to find an exported via NFS file in the readahead cache, it should increment corresponding nfsdstats counter (ra_depth[10]), but due to a bug it may instead write to ra_depth[11], corrupting the following field. In a kernel with NFSDv4 compiled in the corruption takes the form of an increment of a counter of the number of NFSv4 operation 0's received; since there is no operation 0, this is harmless. In a kernel with NFSDv4 disabled it corrupts whatever happens to be in the memory beyond nfsdstats. Signed-off-by: NKonstantin Khorenko <khorenko@openvz.org> Cc: stable@kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Benny Halevy 提交于
Bugs introduced in 85a56480 "NFSD: Update XDR decoders in NFSv4 callback client" Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The exit cleanup isn't quite right here. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Grant Likely 提交于
This reverts commit 9830fcd6. The ARM dt support has not been merged yet; this documentation update was premature. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Borislav Petkov 提交于
We use it in non __cpuinit code now too so drop marker. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20110211171754.GA21047@aftab> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Dan Williams 提交于
Slave-dma has become the predominant usage model for dmaengine and needs special attention. Memory-to-memory dma usage cases will continue to be maintained by Dan. Cc: Alan Cox <alan@linux.intel.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-