During the recent conversion to kernfs, cftype's seq_file operations
are updated so that they are directly mapped to kernfs operations and
thus can fully access the associated kernfs and cgroup contexts;
however, write path hasn't seen similar updates and none of the
existing write operations has access to, for example, the associated
kernfs_open_file.

Let's introduce a new operation cftype->write() which maps directly to
the kernfs write operation and has access to all the arguments and
contexts.  This will replace ->write_string() and ->trigger() and ease
manipulation of kernfs active protection from cgroup file operations.

Two accessors - of_cft() and of_css() - are introduced to enable
accessing the associated cgroup context from cftype->write() which
only takes kernfs_open_file for the context information.  The
accessors for seq_file operations - seq_cft() and seq_css() - are
rewritten to wrap the of_ accessors.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Unlike the more usual refcnting, what css_tryget() provides is the
distinction between online and offline csses instead of protection
against upping a refcnt which already reached zero.  cgroup is
planning to provide actual tryget which fails if the refcnt already
reached zero.  Let's rename the existing trygets so that they clearly
indicate that they're onliness.

I thought about keeping the existing names as-are and introducing new
names for the planned actual tryget; however, given that each
controller participates in the synchronization of the online state, it
seems worthwhile to make it explicit that these functions are about
on/offline state.

Rename css_tryget() to css_tryget_online() and css_tryget_from_dir()
to css_tryget_online_from_dir().  This is pure rename.

v2: cgroup_freezer grew new usages of css_tryget().  Update
    accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>

release_path is now protected by release_agent_path_lock to allow
accessing it without grabbing cgroup_mutex; however,
cgroup_release_agent_show() was still grabbing cgroup_mutex.  Let's
convert it to release_agent_path_lock so that we don't have to worry
about this one for the planned locking updates.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

After waiting for a child to finish offline,
cgroup_subtree_control_write() jumps up to retry from after the input
parsing and active protection breaking.  This retry makes the
scheduled locking update - removal of cgroup_tree_mutex - more
difficult.  Let's simplify it by returning with restart_syscall() for
retries.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

I was confused that strsep() was equivalent to strtok_r() in skipping
over consecutive delimiters.  strsep() just splits at the first
occurrence of one of the delimiters which makes the parsing very
inflexible, which makes allowing multiple whitespace chars as
delimters kinda moot.  Let's just be consistently strict and require
list of tokens separated by spaces.  This is what
Documentation/cgroups/unified-hierarchy.txt describes too.

Also, parsing may access beyond the end of the string if the string
ends with spaces or is zero-length.  Make sure it skips zero-length
tokens.  Note that this also ensures that the parser doesn't puke on
multiple consecutive spaces.

v2: Add zero-length token skipping.

v3: Added missing space after "==".  Spotted by Li.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

c1a71504 ("cgroup: don't recycle cgroup id until all csses' have
been destroyed") made cgroup ID persist until a cgroup is released and
add cgroup->subsys[] clearing to css_release() so that css_from_id()
doesn't return a css which has already been released which happens
before cgroup release; however, the right change here was updating
offline_css() to clear cgroup->subsys[] which was done by e3297803
("cgroup: cgroup->subsys[] should be cleared after the css is
offlined") instead of clearing it from css_release().

We're now clearing cgroup->subsys[] twice.  This is okay for
traditional hierarchies as a css's lifetime is the same as its
cgroup's; however, this confuses unified hierarchy and turning on and
off a controller repeatedly using "cgroup.subtree_control" can lead to
an oops like the following which happens because cgroup->subsys[] is
incorrectly cleared asynchronously by css_release().

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000 08
 IP: [<ffffffff81130c11>] kill_css+0x21/0x1c0
 PGD 1170d067 PUD f0ab067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 2 PID: 459 Comm: bash Not tainted 3.15.0-rc2-work+ #5
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 task: ffff880009296710 ti: ffff88000e198000 task.ti: ffff88000e198000
 RIP: 0010:[<ffffffff81130c11>]  [<ffffffff81130c11>] kill_css+0x21/0x1c0
 RSP: 0018:ffff88000e199dc8  EFLAGS: 00010202
 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: ffffffff8238a968 RDI: ffff880009296f98
 RBP: ffff88000e199de0 R08: 0000000000000001 R09: 02b0000000000000
 R10: 0000000000000000 R11: ffff880009296fc0 R12: 0000000000000001
 R13: ffff88000db6fc58 R14: 0000000000000001 R15: ffff8800139dcc00
 FS:  00007ff9160c5740(0000) GS:ffff88001fb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 0000000013947000 CR4: 00000000000006e0
 Stack:
  ffff88000e199de0 ffffffff82389160 0000000000000001 ffff88000e199e80
  ffffffff8113537f 0000000000000007 ffff88000e74af00 ffff88000e199e48
  ffff880009296710 ffff88000db6fc00 ffffffff8239c100 0000000000000002
 Call Trace:
  [<ffffffff8113537f>] cgroup_subtree_control_write+0x85f/0xa00
  [<ffffffff8112fd18>] cgroup_file_write+0x38/0x1d0
  [<ffffffff8126fc97>] kernfs_fop_write+0xe7/0x170
  [<ffffffff811f2ae6>] vfs_write+0xb6/0x1c0
  [<ffffffff811f35ad>] SyS_write+0x4d/0xc0
  [<ffffffff81d0acd2>] system_call_fastpath+0x16/0x1b
 Code: 5c 41 5d 41 5e 41 5f 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb 48 83 ec 08 8b 05 37 ad 29 01 85 c0 0f 85 df 00 00 00 <48> 8b 43 08 48 8b 3b be 01 00 00 00 8b 48 5c d3 e6 e8 49 ff ff
 RIP  [<ffffffff81130c11>] kill_css+0x21/0x1c0
  RSP <ffff88000e199dc8>
 CR2: 0000000000000008
 ---[ end trace e7aae1f877c4e1b4 ]---

Remove the unnecessary cgroup->subsys[] clearing from css_release().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_idr_remove() can be invoked from bh leading to lockdep
detecting possible AA deadlock (IN_BH/ON_BH).  Make the lock bh-safe.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_subtree_control_write() waits for offline to complete
child-by-child before enabling a controller; however, it has a couple
bugs.

* It doesn't initialize the wait_queue_t.  This can lead to infinite
  hang on the following schedule() among other things.

* It forgets to pin the child before releasing cgroup_tree_mutex and
  performing schedule().  The child may already be gone by the time it
  wakes up and invokes finish_wait().  Pin the child being waited on.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Merge branch 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup into for-3.16

Pull to receive e37a06f1 ("cgroup: fix the retry path of
cgroup_mount()") to avoid unnecessary conflicts with planned
cgroup_tree_mutex removal and also to be able to remove the temp fix
added by 36c38fb7 ("blkcg: use trylock on blkcg_pol_mutex in
blkcg_reset_stats()") afterwards.
Signed-off-by: NTejun Heo <tj@kernel.org>

While updating cgroup_freezer locking, 68fafb77d827 ("cgroup_freezer:
replace freezer->lock with freezer_mutex") introduced a bug in
update_if_frozen() where it returns with rcu_read_lock() held.  Fix it
by adding rcu_read_unlock() before returning.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>

Pull to receive percpu_ref_tryget[_live]() changes.  Planned cgroup
changes will make use of them.
Signed-off-by: NTejun Heo <tj@kernel.org>

After 96d365e0 ("cgroup: make css_set_lock a rwsem and rename it
to css_set_rwsem"), css task iterators requires sleepable context as
it may block on css_set_rwsem.  I missed that cgroup_freezer was
iterating tasks under IRQ-safe spinlock freezer->lock.  This leads to
errors like the following on freezer state reads and transitions.

  BUG: sleeping function called from invalid context at /work
 /os/work/kernel/locking/rwsem.c:20
  in_atomic(): 0, irqs_disabled(): 0, pid: 462, name: bash
  5 locks held by bash/462:
   #0:  (sb_writers#7){.+.+.+}, at: [<ffffffff811f0843>] vfs_write+0x1a3/0x1c0
   #1:  (&of->mutex){+.+.+.}, at: [<ffffffff8126d78b>] kernfs_fop_write+0xbb/0x170
   #2:  (s_active#70){.+.+.+}, at: [<ffffffff8126d793>] kernfs_fop_write+0xc3/0x170
   #3:  (freezer_mutex){+.+...}, at: [<ffffffff81135981>] freezer_write+0x61/0x1e0
   #4:  (rcu_read_lock){......}, at: [<ffffffff81135973>] freezer_write+0x53/0x1e0
  Preemption disabled at:[<ffffffff81104404>] console_unlock+0x1e4/0x460

  CPU: 3 PID: 462 Comm: bash Not tainted 3.15.0-rc1-work+ #10
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
   ffff88000916a6d0 ffff88000e0a3da0 ffffffff81cf8c96 0000000000000000
   ffff88000e0a3dc8 ffffffff810cf4f2 ffffffff82388040 ffff880013aaf740
   0000000000000002 ffff88000e0a3de8 ffffffff81d05974 0000000000000246
  Call Trace:
   [<ffffffff81cf8c96>] dump_stack+0x4e/0x7a
   [<ffffffff810cf4f2>] __might_sleep+0x162/0x260
   [<ffffffff81d05974>] down_read+0x24/0x60
   [<ffffffff81133e87>] css_task_iter_start+0x27/0x70
   [<ffffffff8113584d>] freezer_apply_state+0x5d/0x130
   [<ffffffff81135a16>] freezer_write+0xf6/0x1e0
   [<ffffffff8112eb88>] cgroup_file_write+0xd8/0x230
   [<ffffffff8126d7b7>] kernfs_fop_write+0xe7/0x170
   [<ffffffff811f0756>] vfs_write+0xb6/0x1c0
   [<ffffffff811f121d>] SyS_write+0x4d/0xc0
   [<ffffffff81d08292>] system_call_fastpath+0x16/0x1b

freezer->lock used to be used in hot paths but that time is long gone
and there's no reason for the lock to be IRQ-safe spinlock or even
per-cgroup.  In fact, given the fact that a cgroup may contain large
number of tasks, it's not a good idea to iterate over them while
holding IRQ-safe spinlock.

Let's simplify locking by replacing per-cgroup freezer->lock with
global freezer_mutex.  This also makes the comments explaining the
intricacies of policy inheritance and the locking around it as the
states are protected by a common mutex.

The conversion is mostly straight-forward.  The followings are worth
mentioning.

* freezer_css_online() no longer needs double locking.

* freezer_attach() now performs propagation simply while holding
  freezer_mutex.  update_if_frozen() race no longer exists and the
  comment is removed.

* freezer_fork() now tests whether the task is in root cgroup using
  the new task_css_is_root() without doing rcu_read_lock/unlock().  If
  not, it grabs freezer_mutex and performs the operation.

* freezer_read() and freezer_change_state() grab freezer_mutex across
  the whole operation and pin the css while iterating so that each
  descendant processing happens in sleepable context.

Fixes: 96d365e0 ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem")
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Determining the css of a task usually requires RCU read lock as that's
the only thing which keeps the returned css accessible till its
reference is acquired; however, testing whether a task belongs to the
root can be performed without dereferencing the returned css by
comparing the returned pointer against the root one in init_css_set[]
which never changes.

Implement task_css_is_root() which can be invoked in any context.
This will be used by the scheduled cgroup_freezer change.

v2: cgroup no longer supports modular controllers.  No need to export
    init_css_set.  Pointed out by Li.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Implement percpu_ref_tryget() which fails if the refcnt already
reached zero.  Note that this is different from the recently renamed
percpu_ref_tryget_live() which fails if the refcnt has been killed and
is draining the remaining references.  percpu_ref_tryget() succeeds on
a killed refcnt as long as its current refcnt is above zero.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NKent Overstreet <kmo@daterainc.com>

percpu_ref_tryget() is different from the usual tryget semantics in
that it fails if the refcnt is in its dying stage even if the refcnt
hasn't reached zero yet.  We're about to introduce the more
conventional tryget and the current one has only one user.  Let's
rename it to percpu_ref_tryget_live() so that it explicitly signifies
the peculiarities of its semantics.

This is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NKent Overstreet <kmo@daterainc.com>

This cgroup flag has never been used.  Only CGRP_ROOT_SANE_BEHAVIOR is
used.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This patch also converts seq_printf to seq_puts

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Fix typo and variable name.

tj: Updated @cgrp argument description in cgroup_destroy_css_killed()

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NTejun Heo <tj@kernel.org>

During the recent conversion of cgroup to kernfs, cgroup_tree_mutex
which nests above both the kernfs s_active protection and cgroup_mutex
is added to synchronize cgroup file type operations as cgroup_mutex
needed to be grabbed from some file operations and thus can't be put
above s_active protection.

While this arrangement mostly worked for cgroup, this triggered the
following lockdep warning.

  ======================================================
  [ INFO: possible circular locking dependency detected ]
  3.15.0-rc3-next-20140430-sasha-00016-g4e281fa-dirty #429 Tainted: G        W
  -------------------------------------------------------
  trinity-c173/9024 is trying to acquire lock:
  (blkcg_pol_mutex){+.+.+.}, at: blkcg_reset_stats (include/linux/spinlock.h:328 block/blk-cgroup.c:455)

  but task is already holding lock:
  (s_active#89){++++.+}, at: kernfs_fop_write (fs/kernfs/file.c:283)

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (s_active#89){++++.+}:
  lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602)
  __kernfs_remove (arch/x86/include/asm/atomic.h:27 fs/kernfs/dir.c:352 fs/kernfs/dir.c:1024)
  kernfs_remove_by_name_ns (fs/kernfs/dir.c:1219)
  cgroup_addrm_files (include/linux/kernfs.h:427 kernel/cgroup.c:1074 kernel/cgroup.c:2899)
  cgroup_clear_dir (kernel/cgroup.c:1092 (discriminator 2))
  rebind_subsystems (kernel/cgroup.c:1144)
  cgroup_setup_root (kernel/cgroup.c:1568)
  cgroup_mount (kernel/cgroup.c:1716)
  mount_fs (fs/super.c:1094)
  vfs_kern_mount (fs/namespace.c:899)
  do_mount (fs/namespace.c:2238 fs/namespace.c:2561)
  SyS_mount (fs/namespace.c:2758 fs/namespace.c:2729)
  tracesys (arch/x86/kernel/entry_64.S:746)

  -> #1 (cgroup_tree_mutex){+.+.+.}:
  lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602)
  mutex_lock_nested (kernel/locking/mutex.c:486 kernel/locking/mutex.c:587)
  cgroup_add_cftypes (include/linux/list.h:76 kernel/cgroup.c:3040)
  blkcg_policy_register (block/blk-cgroup.c:1106)
  throtl_init (block/blk-throttle.c:1694)
  do_one_initcall (init/main.c:789)
  kernel_init_freeable (init/main.c:854 init/main.c:863 init/main.c:882 init/main.c:1003)
  kernel_init (init/main.c:935)
  ret_from_fork (arch/x86/kernel/entry_64.S:552)

  -> #0 (blkcg_pol_mutex){+.+.+.}:
  __lock_acquire (kernel/locking/lockdep.c:1840 kernel/locking/lockdep.c:1945 kernel/locking/lockdep.c:2131 kernel/locking/lockdep.c:3182)
  lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602)
  mutex_lock_nested (kernel/locking/mutex.c:486 kernel/locking/mutex.c:587)
  blkcg_reset_stats (include/linux/spinlock.h:328 block/blk-cgroup.c:455)
  cgroup_file_write (kernel/cgroup.c:2714)
  kernfs_fop_write (fs/kernfs/file.c:295)
  vfs_write (fs/read_write.c:532)
  SyS_write (fs/read_write.c:584 fs/read_write.c:576)
  tracesys (arch/x86/kernel/entry_64.S:746)

  other info that might help us debug this:

  Chain exists of:
  blkcg_pol_mutex --> cgroup_tree_mutex --> s_active#89

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(s_active#89);
				 lock(cgroup_tree_mutex);
				 lock(s_active#89);
    lock(blkcg_pol_mutex);

   *** DEADLOCK ***

  4 locks held by trinity-c173/9024:
  #0: (&f->f_pos_lock){+.+.+.}, at: __fdget_pos (fs/file.c:714)
  #1: (sb_writers#18){.+.+.+}, at: vfs_write (include/linux/fs.h:2255 fs/read_write.c:530)
  #2: (&of->mutex){+.+.+.}, at: kernfs_fop_write (fs/kernfs/file.c:283)
  #3: (s_active#89){++++.+}, at: kernfs_fop_write (fs/kernfs/file.c:283)

  stack backtrace:
  CPU: 3 PID: 9024 Comm: trinity-c173 Tainted: G        W     3.15.0-rc3-next-20140430-sasha-00016-g4e281fa-dirty #429
   ffffffff919687b0 ffff8805f6373bb8 ffffffff8e52cdbb 0000000000000002
   ffffffff919d8400 ffff8805f6373c08 ffffffff8e51fb88 0000000000000004
   ffff8805f6373c98 ffff8805f6373c08 ffff88061be70d98 ffff88061be70dd0
  Call Trace:
  dump_stack (lib/dump_stack.c:52)
  print_circular_bug (kernel/locking/lockdep.c:1216)
  __lock_acquire (kernel/locking/lockdep.c:1840 kernel/locking/lockdep.c:1945 kernel/locking/lockdep.c:2131 kernel/locking/lockdep.c:3182)
  lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602)
  mutex_lock_nested (kernel/locking/mutex.c:486 kernel/locking/mutex.c:587)
  blkcg_reset_stats (include/linux/spinlock.h:328 block/blk-cgroup.c:455)
  cgroup_file_write (kernel/cgroup.c:2714)
  kernfs_fop_write (fs/kernfs/file.c:295)
  vfs_write (fs/read_write.c:532)
  SyS_write (fs/read_write.c:584 fs/read_write.c:576)

This is a highly unlikely but valid circular dependency between "echo
1 > blkcg.reset_stats" and cfq module [un]loading.  cgroup is going
through further locking update which will remove this complication but
for now let's use trylock on blkcg_pol_mutex and retry the file
operation if the trylock fails.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
References: http://lkml.kernel.org/g/5363C04B.4010400@oracle.com

[PATCH v3 1/2] device_cgroup: check if exception removal is allowed

When the device cgroup hierarchy was introduced in
	bd2953eb - devcg: propagate local changes down the hierarchy

a specific case was overlooked. Consider the hierarchy bellow:

	A	default policy: ALLOW, exceptions will deny access
	 \
	  B	default policy: ALLOW, exceptions will deny access

There's no need to verify when an new exception is added to B because
in this case exceptions will deny access to further devices, which is
always fine. Hierarchy in device cgroup only makes sure B won't have
more access than A.

But when an exception is removed (by writing devices.allow), it isn't
checked if the user is in fact removing an inherited exception from A,
thus giving more access to B.

Example:

	# echo 'a' >A/devices.allow
	# echo 'c 1:3 rw' >A/devices.deny
	# echo $$ >A/B/tasks
	# echo >/dev/null
	-bash: /dev/null: Operation not permitted
	# echo 'c 1:3 w' >A/B/devices.allow
	# echo >/dev/null
	#

This shouldn't be allowed and this patch fixes it by making sure to never allow
exceptions in this case to be removed if the exception is partially or fully
present on the parent.

v3: missing '*' in function description
v2: improved log message and formatting fixes

Cc: cgroups@vger.kernel.org
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Moving more extensive explanations to the end of the comment.

Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Until now, cgroup->id has been used to identify all the associated
csses and css_from_id() takes cgroup ID and returns the matching css
by looking up the cgroup and then dereferencing the css associated
with it; however, now that the lifetimes of cgroup and css are
separate, this is incorrect and breaks on the unified hierarchy when a
controller is disabled and enabled back again before the previous
instance is released.

This patch adds css->id which is a subsystem-unique ID and converts
css_from_id() to look up by the new css->id instead.  memcg is the
only user of css_from_id() and also converted to use css->id instead.

For traditional hierarchies, this shouldn't make any functional
difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: NLi Zefan <lizefan@huawei.com>

init_css() takes the cgroup the new css belongs to as an argument and
initializes the new css's ->cgroup and ->parent pointers but doesn't
acquire the matching reference counts.  After the previous patch,
create_css() puts init_css() and reference acquisition right next to
each other.  Let's move reference acquistion into init_css() and
rename the function to init_and_link_css().  This makes sense and is
easier to follow.  This makes the root csses to hold a reference on
cgrp_dfl_root.cgrp, which is harmless.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, when create_css() fails in the middle, the half-initialized
css is freed by invoking cgroup_subsys->css_free() directly.  This
patch updates the function so that it invokes RCU free path instead.
As the RCU free path puts the parent css and owning cgroup, their
references are now acquired right after a new css is successfully
allocated.

This doesn't make any visible difference now but is to enable
implementing css->id and RCU protected lookup by such IDs.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, cgroup_root->cgroup_idr is protected by cgroup_mutex, which
ends up requiring cgroup_put() to be invoked under sleepable context.
This is okay for now but is an unusual requirement and we'll soon add
css->id which will have the same problem but won't be able to simply
grab cgroup_mutex as removal will have to happen from css_release()
which can't sleep.

Introduce cgroup_idr_lock and idr_alloc/replace/remove() wrappers
which protects the idr operations with the lock and use them for
cgroup_root->cgroup_idr.  cgroup_put() no longer needs to grab
cgroup_mutex and css_from_id() is updated to always require RCU read
lock instead of either RCU read lock or cgroup_mutex, which doesn't
affect the existing users.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, cgroup->id is allocated from 0, which is always assigned to
the root cgroup; unfortunately, memcg wants to use ID 0 to indicate
invalid IDs and ends up incrementing all IDs by one.

It's reasonable to reserve 0 for special purposes.  This patch updates
cgroup core so that ID 0 is not used and the root cgroups get ID 1.
The ID incrementing is removed form memcg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

There's no reason to use atomic bitops for cgroup_subsys_state->flags,
cgroup_root->flags and various subsys_masks.  This patch updates those
to use bitwise and/or operations instead and converts them form
unsigned long to unsigned int.

This makes the fields occupy (marginally) smaller space and makes it
clear that they don't require atomicity.

This patch doesn't cause any behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Use pr_fmt and remove embedded prefixes.
Realign modified multi-line statements to open parenthesis.
Convert embedded function name to "%s: ", __func__
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

As suggested by scripts/checkpatch.pl, substitude all pr_warning()
with pr_warn().

No functional change.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

6612f05b ("cgroup: unify pidlist and other file handling")
has removed the only user of cgroup_pidlist_seq_operations :
cgroup_pidlist_open().

This patch removes it.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

1d5be6b2 ("cgroup: move module ref handling into
rebind_subsystems()") makes parse_cgroupfs_options() no longer takes
refcounts on subsystems.

And unified hierachy makes parse_cgroupfs_options not need to call
with cgroup_mutex held to protect the cgroup_subsys[].

So this patch removes BUG_ON() and the comment.  As the comment
doesn't contain useful information afterwards, the whole comment is
removed.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Unified hierarchy will be the new version of cgroup interface.  This
patch adds Documentation/cgroups/unified-hierarchy.txt which describes
the design and rationales of unified hierarchy.

v2: Grammatical updates as per Randy Dunlap's review.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>

cgroup users often need a way to determine when a cgroup's
subhierarchy becomes empty so that it can be cleaned up.  cgroup
currently provides release_agent for it; unfortunately, this mechanism
is riddled with issues.

* It delivers events by forking and execing a userland binary
  specified as the release_agent.  This is a long deprecated method of
  notification delivery.  It's extremely heavy, slow and cumbersome to
  integrate with larger infrastructure.

* There is single monitoring point at the root.  There's no way to
  delegate management of a subtree.

* The event isn't recursive.  It triggers when a cgroup doesn't have
  any tasks or child cgroups.  Events for internal nodes trigger only
  after all children are removed.  This again makes it impossible to
  delegate management of a subtree.

* Events are filtered from the kernel side.  "notify_on_release" file
  is used to subscribe to or suppress release event.  This is
  unnecessarily complicated and probably done this way because event
  delivery itself was expensive.

This patch implements interface file "cgroup.populated" which can be
used to monitor whether the cgroup's subhierarchy has tasks in it or
not.  Its value is 0 if there is no task in the cgroup and its
descendants; otherwise, 1, and kernfs_notify() notificaiton is
triggers when the value changes, which can be monitored through poll
and [di]notify.

This is a lot ligther and simpler and trivially allows delegating
management of subhierarchy - subhierarchy monitoring can block further
propgation simply by putting itself or another process in the root of
the subhierarchy and monitor events that it's interested in from there
without interfering with monitoring higher in the tree.

v2: Patch description updated as per Serge.

v3: "cgroup.subtree_populated" renamed to "cgroup.populated".  The
    subtree_ prefix was a bit confusing because
    "cgroup.subtree_control" uses it to denote the tree rooted at the
    cgroup sans the cgroup itself while the populated state includes
    the cgroup itself.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Lennart Poettering <lennart@poettering.net>

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into for-3.16

Pull in driver-core-next to receive kernfs_notify() updates which will
be used by the planned "cgroup.populated" implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>

Support for uevent_helper, aka hotplug, is not required on many systems
these days but it can still be enabled via sysfs or sysctl.
Reported-by: NDarren Shepherd <darren.s.shepherd@gmail.com>
Signed-off-by: NMichael Marineau <mike@marineau.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs_notify() is used to indicate either new data is available or
the content of a file has changed.  It currently only triggers poll
which may not be the most convenient to monitor especially when there
are a lot to monitor.  Let's hook it up to fsnotify too so that the
events can be monitored via inotify too.

fsnotify_modify() requires file * but kernfs_notify() doesn't have any
specific file associated; however, we can walk all super_blocks
associated with a kernfs_root and as kernfs always associate one ino
with inode and one dentry with an inode, it's trivial to look up the
dentry associated with a given kernfs_node.  As any active monitor
would pin dentry, just looking up existing dentry is enough.  This
patch looks up the dentry associated with the specified kernfs_node
and generates events equivalent to fsnotify_modify().

Note that as fsnotify doesn't provide fsnotify_modify() equivalent
which can be called with dentry, kernfs_notify() directly calls
fsnotify_parent() and fsnotify().  It might be better to add a wrapper
in fsnotify.h instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, there's no way to find out which super_blocks are
associated with a given kernfs_root.  Let's implement it - the planned
inotify extension to kernfs_notify() needs it.

Make kernfs_super_info point back to the super_block and chain it at
kernfs_root->supers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup is switching away from multiple hierarchies and will use one
unified default hierarchy where controllers can be dynamically enabled
and disabled per subtree.  The default hierarchy will serve as the
unified hierarchy to which all controllers are attached and a css on
the default hierarchy would need to also serve the tasks of descendant
cgroups which don't have the controller enabled - ie. the tree may be
collapsed from leaf towards root when viewed from specific
controllers.  This has been implemented through effective css in the
previous patches.

This patch finally implements dynamic subtree controller
enable/disable on the default hierarchy via a new knob -
"cgroup.subtree_control" which controls which controllers are enabled
on the child cgroups.  Let's assume a hierarchy like the following.

  root - A - B - C
               \ D

root's "cgroup.subtree_control" determines which controllers are
enabled on A.  A's on B.  B's on C and D.  This coincides with the
fact that controllers on the immediate sub-level are used to
distribute the resources of the parent.  In fact, it's natural to
assume that resource control knobs of a child belong to its parent.
Enabling a controller in "cgroup.subtree_control" declares that
distribution of the respective resources of the cgroup will be
controlled.  Note that this means that controller enable states are
shared among siblings.

The default hierarchy has an extra restriction - only cgroups which
don't contain any task may have controllers enabled in
"cgroup.subtree_control".  Combined with the other properties of the
default hierarchy, this guarantees that, from the view point of
controllers, tasks are only on the leaf cgroups.  In other words, only
leaf csses may contain tasks.  This rules out situations where child
cgroups compete against internal tasks of the parent, which is a
competition between two different types of entities without any clear
way to determine resource distribution between the two.  Different
controllers handle it differently and all the implemented behaviors
are ambiguous, ad-hoc, cumbersome and/or just wrong.  Having this
structural constraints imposed from cgroup core removes the burden
from controller implementations and enables showing one consistent
behavior across all controllers.

When a controller is enabled or disabled, css associations for the
controller in the subtrees of each child should be updated.  After
enabling, the whole subtree of a child should point to the new css of
the child.  After disabling, the whole subtree of a child should point
to the cgroup's css.  This is implemented by first updating cgroup
states such that cgroup_e_css() result points to the appropriate css
and then invoking cgroup_update_dfl_csses() which migrates all tasks
in the affected subtrees to the self cgroup on the default hierarchy.

* When read, "cgroup.subtree_control" lists all the currently enabled
  controllers on the children of the cgroup.

* White-space separated list of controller names prefixed with either
  '+' or '-' can be written to "cgroup.subtree_control".  The ones
  prefixed with '+' are enabled on the controller and '-' disabled.

* A controller can be enabled iff the parent's
  "cgroup.subtree_control" enables it and disabled iff no child's
  "cgroup.subtree_control" has it enabled.

* If a cgroup has tasks, no controller can be enabled via
  "cgroup.subtree_control".  Likewise, if "cgroup.subtree_control" has
  some controllers enabled, tasks can't be migrated into the cgroup.

* All controllers which aren't bound on other hierarchies are
  automatically associated with the root cgroup of the default
  hierarchy.  All the controllers which are bound to the default
  hierarchy are listed in the read-only file "cgroup.controllers" in
  the root directory.

* "cgroup.controllers" in all non-root cgroups is read-only file whose
  content is equal to that of "cgroup.subtree_control" of the parent.
  This indicates which controllers can be used in the cgroup's
  "cgroup.subtree_control".

This is still experimental and there are some holes, one of which is
that ->can_attach() failure during cgroup_update_dfl_csses() may leave
the cgroups in an undefined state.  The issues will be addressed by
future patches.

v2: Non-root cgroups now also have "cgroup.controllers".
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Unified hierarchy implementation would require re-migrating tasks onto
the same cgroup on the default hierarchy to reflect updated effective
csses.  Update cgroup_migrate_prepare_dst() so that it accepts NULL as
the destination cgrp.  When NULL is specified, the destination is
considered to be the cgroup on the default hierarchy associated with
each css_set.

After this change, the identity check in cgroup_migrate_add_src()
isn't sufficient for noop detection as the associated csses may change
without any cgroup association changing.  The only way to tell whether
a migration is noop or not is testing whether the source and
destination csets are identical.  The noop check in
cgroup_migrate_add_src() is removed and cset identity test is added to
cgroup_migreate_prepare_dst().  If it's detected that source and
destination csets are identical, the cset is removed removed from
@preloaded_csets and all the migration nodes are cleared which makes
cgroup_migrate() ignore the cset.

Also, make the function append the destination css_sets to
@preloaded_list so that destination css_sets always come after source
css_sets.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>