Use PM_FREEZE, PM_THAW and PM_RESTORE power events for
suspend/resume/checkpoint functionality, instead of PM_SUSPEND
and PM_RESUME. Use of these pm events fixes the Xen Guest hangup
when taking checkpoints. When a suspend event is cancelled
(while taking checkpoints once/continuously), we use PM_THAW
instead of PM_RESUME. PM_RESTORE is used when suspend is not
cancelled. See Documentation/power/devices.txt and linux/pm.h
for more info about freeze, thaw and restore. The sequence of
pm events in a suspend-resume scenario is shown below.

        dpm_suspend_start(PMSG_FREEZE);

                dpm_suspend_noirq(PMSG_FREEZE);

                       sysdev_suspend(PMSG_FREEZE);
                       cancelled = suspend_hypercall()
                       sysdev_resume();

               dpm_resume_noirq(cancelled ? PMSG_THAW : PMSG_RESTORE);

       dpm_resume_end(cancelled ? PMSG_THAW : PMSG_RESTORE);
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NShriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Make xenbus frontend device subscribe to PM events
to receive suspend/resume/freeze/thaw/restore
notifications.
Signed-off-by: NKenji Wakamiya <wkenji@jp.fujitsu.com>
Signed-off-by: NKazuhiro Suzuki <kaz@jp.fujitsu.com>
Signed-off-by: NShriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
[shriram--minor mods and improved commit message]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The function name does not distinguish it from xen_allocate_pirq_msi
(which operates on domU and pvhvm domains rather than dom0).

Hoist domain 0 specific functionality up into the only caller leaving
functionality common to all guest types in xen_bind_pirq_msi_to_irq.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Makes the tail end of this function look even more like
xen_bind_pirq_msi_to_irq.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't think this was a deliberate ommision.

Makes the tail end of this function look even more like
xen_bind_pirq_msi_to_irq.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Calling PHYSDEVOP_map_pirq earlier simplifies error handling and
starts to make the tail end of this function look like
xen_bind_pirq_msi_to_irq.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Split the binding aspect of xen_allocate_pirq_msi out into a new
xen_bind_pirq_to_irq function.

In xen_hvm_setup_msi_irq when allocating a pirq write the MSI message
to signal the PIRQ as soon as the pirq is obtained. There is no way to
free the pirq back so if the subsequent binding to an IRQ fails we
want to ensure that we will reuse the PIRQ next time rather than leak
it.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The find_unbound_pirq is called only from xen_allocate_pirq_msi and
only if alloc_pirq is true. The only caller which does this is
xen_hvm_setup_msi_irqs. The use of this function is gated, in
pci_xen_hvm_init, on XENFEAT_hvm_pirqs.

The PHYSDEVOP_get_free_pirq interfaces was added to the hypervisor in
22410:be96f6058c05 while XENFEAT_hvm_pirqs was added a couple of
minutes prior in 22409:6663214f06ac. Therefore we do not need to
concern ourselves with hypervisors which support XENFEAT_hvm_pirqs but
not PHYSDEVOP_get_free_pirq.

This eliminates the fallback path in find_unbound_pirq which walks to
pirq_to_irq array looking for a free pirq. Unlike the
PHYSDEVOP_get_free_pirq interface this fallback only looks up a free
pirq but does not reserve it. Removing this fallback will simplify
locking in the future.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

consistent with other similar functions.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

All callers pass this flag so it is pointless.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We only did this for PV guests that are xen_initial_domain() but
there is not reason not to do this for other cases. The other
case is only exercised when you pass in a PCI device to a PV guest
_and_ the device in question.
Reviewed-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Mark the IRQF_NO_SUSPEND interrupts IRQF_FORCE_RESUME and remove the extra
walk through the interrupt descriptors.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

drivers/xen/events.c: In function 'ack_pirq':
drivers/xen/events.c:568: error: implicit declaration of function 'irq_move_irq'
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Convert Xen to the new irq_chip functions. Brings us closer to enable
CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

irq_chip.end got obsolete with the removal of __do_IRQ()
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

c514d00c8057 "xen: events: add xen_allocate_irq_{dynamic, gsi} and
xen_free_irq" correctly avoids reallocating legacy IRQs (which are
managed by the arch core) but erroneously did not prevent them being
freed.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There are three cases which we need to care about, PV guest, PV domain
0 and HVM guest.

The PV guest case is simple since it has no access to ACPI or real
APICs and therefore has no GSIs therefore we simply dynamically
allocate all IRQs. The potentially interesting case here is PIRQ type
event channels associated with passed through PCI devices. However
even in this case the guest has no direct interaction with the
physical GSI since that happens in the PCI backend.

The PV domain 0 and HVM guest cases are actually the same. In domain 0
case the kernel sees the host ACPI and GSIs (although it only sees the
APIC indirectly via the hypervisor) and in the HVM guest case it sees
the virtualised ACPI and emulated APICs. In these cases we start
allocating dynamic IRQs at nr_irqs_gsi so that they cannot clash with
any GSI.

Currently xen_allocate_irq_dynamic starts at nr_irqs and works
backwards looking for a free IRQ in order to (try and) avoid clashing
with GSIs used in domain 0 and in HVM guests. This change avoids that
although we retain the behaviour of allowing dynamic IRQs to encroach
on the GSI range if no suitable IRQs are available since a future IRQ
clash is deemed preferable to failure right now.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

This is neater than open-coded calls to irq_alloc_desc_at and
irq_free_desc.

No intended behavioural change.

Note that we previously were not checking the return value of
irq_alloc_desc_at which would be failing for GSI<NR_IRQS_LEGACY
because the core architecture code has already allocated those for
us. Hence the additional check against NR_IRQS_LEGACY in
xen_allocate_irq_gsi.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

The only caller is xen_allocate_pirq_msi which is also under this
ifdef so this fixes:
    drivers/xen/events.c:377: warning: 'find_unbound_pirq' defined but not used
when CONFIG_PCI_MSI=n
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

With this patch, we diligently set regions that will be used by the
balloon driver to be INVALID_P2M_ENTRY and under the ownership
of the balloon driver. We are OK using the __set_phys_to_machine
as we do not expect to be allocating any P2M middle or entries pages.
The set_phys_to_machine has the side-effect of potentially allocating
new pages and we do not want that at this stage.

We can do this because xen_build_mfn_list_list will have already
allocated all such pages up to xen_max_p2m_pfn.

We also move the check for auto translated physmap down the
stack so it is present in __set_phys_to_machine.

[v2: Rebased with mmu->p2m code split]
Reviewed-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

It is now identical to xen_suspend, the differences are encapsulated
in the suspend_info struct.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

xen_pre_device_suspend is unused on ia64.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Will add extra fields in subsequent patches.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The PV xenbus control/shutdown node is written by the toolstack as a
request to the guest to perform a particular action (shutdown, reboot,
suspend etc). The guest is expected to acknowledge that it will
complete a request by clearing the control node.

Previously it would acknowledge any request, even if it did not know
what to do with it. Specifically in the case where CONFIG_PM_SLEEP is
not enabled the kernel would acknowledge a suspend request even though
it was not actually going to do anything.

Instead make the kernel only acknowledge requests if it is actually
going to do something with it. This will improve the toolstack's
ability to diagnose and deal with failures.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Now that xenstore_ready is used correctly for PV on HVM guests too, we
don't need to delay the initialization of xen_setup_shutdown_event
anymore.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>

Otherwise we fail to properly suspend/resume all of the emulated devices.

Something between 2.6.38-rc2 and rc3 appears to have exposed this
issue, but it's always been wrong not to do this.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>

This variable starts out pointing at init_evtchn_mask which is marked
__initdata but is set to point to a non-init data region in xen_init_IRQ
which is itself an __init function so this is safe.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Tested-and-acked-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

drivers/xen/platform-pci.c:127: error: implicit declaration of function
          'pci_request_region'
drivers/xen/platform-pci.c:165: error: implicit declaration of function
          'pci_release_region'
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

platform-pci is rather generic for a modular distro style kernel.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This is the correct interface to use and something has broken the use
of the previous incorrect interface (which fails because the request
conflicts with the resources assigned for the PCI device itself
instead of nesting like the PCI interfaces do).
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@kernel.org # 2.6.37 only

When adding a page to m2p_override we change the p2m of the page so we
need to also clear the old pte of the kernel linear mapping because it
doesn't correspond anymore.

When we remove the page from m2p_override we restore the original p2m of
the page and we also restore the old pte of the kernel linear mapping.

Before changing the p2m mappings in m2p_add_override and
m2p_remove_override, check that the page passed as argument is valid and
return an error if it is not.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Use gnttab_map_refs and gnttab_unmap_refs to map and unmap the grant
ref, so that we can have a corresponding struct page.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>