Fix the following build errors reported by Yinghai Lu:

| In file included from arch/x86/mach-generic/summit.c:16:
| tip/linux-2.6/arch/x86/include/asm/summit/apic.h:
| In function 'cpu_mask_to_apicid_and':
| tip/linux-2.6/arch/x86/include/asm/summit/apic.h:179:
| error: 'GFP_ATOMIC' undeclared (first use in this function)
Reported-by: NYinghai Lu <Yinghai.Lu@Sun.COM>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce future system panics due to cpumask operations using NR_CPUS

Insure that code does not look at bits >= nr_cpu_ids as when cpumasks are
allocated based on nr_cpu_ids, these extra bits will not be defined.

Also some other minor updates:

   * change in to use cpu accessor function set_cpu_present() instead of
     directly accessing cpu_present_map w/cpu_clear() [arch/x86/kernel/reboot.c]

   * use cpumask_of() instead of &cpumask_of_cpu() [arch/x86/kernel/reboot.c]

   * optimize some cpu_mask_to_apicid_and functions.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix potential APIC crash

In determining the destination apicid, there are usually three cpumasks
that are considered: the incoming cpumask arg, cfg->domain and the
cpu_online_mask.  Since we are just introducing the cpu_mask_to_apicid_and
function, make sure it includes the cpu_online_mask in it's evaluation.
[Added with this patch.]

There are two io_apic.c functions that did not previously use the
cpu_online_mask:  setup_IO_APIC_irq and msi_compose_msg.  Both of these
simply used cpu_mask_to_apicid(cfg->domain & TARGET_CPUS), and all but
one arch (NUMAQ[*]) returns only online cpus in the TARGET_CPUS mask,
so the behavior is identical for all cases.

[*: NUMAQ bug?]

Note that alloc_cpumask_var is only used for the 32-bit cases where
it's highly likely that the cpumask set size will be small and therefore
CPUMASK_OFFSTACK=n.  But if that's not the case, failing the allocate
will cause the same return value as the default.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use updated APIs

Various API updates for x86:add-cpu_mask_to_apicid_and

(Note: separate because previous patch has been "backported" to 2.6.27.)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: new API

Add a helper function that takes two cpumask's, and's them and then
returns the apicid of the result.  This removes a need in io_apic.c
that uses a temporary cpumask to hold (mask & cfg->domain).
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Impact: cleanup, change parameter passing

  * Change genapic interfaces to accept cpumask_t pointers where possible.

  * Modify external callers to use cpumask_t pointers in function calls.

  * Create new send_IPI_mask_allbutself which is the same as the
    send_IPI_mask functions but removes smp_processor_id() from list.
    This removes another common need for a temporary cpumask_t variable.

  * Functions that used a temp cpumask_t variable for:

	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	if (!cpus_empty(allbutme))
		...

    become:

	if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
		...

  * Other minor code optimizations (like using cpus_clear instead of
    CPU_MASK_NONE, etc.)

Applies to linux-2.6.tip/master.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

We can autodetect those system that need cluster apic, and update genapic
accordingly.

We can also remove wakeup.h for e7000, because it's default one is now
the same as overall default mach_wakecpu.h
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix secondary-CPU wakeup/init path with numaq and es7000

While looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI:

|#ifdef WAKE_SECONDARY_VIA_NMI
|/*
| * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
| * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
| * won't ... remember to clear down the APIC, etc later.
| */
|static int __devinit
|wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
|{
|        unsigned long send_status, accept_status = 0;
|        int maxlvt;
|...
|        if (APIC_INTEGRATED(apic_version[phys_apicid])) {
|                maxlvt = lapic_get_maxlvt();

I noticed that there is no warning about undefined phys_apicid...

because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_INIT can not be
defined at the same time. So NUMAQ is using wrong wakeup_secondary_cpu.

WAKE_SECONDARY_VIA_NMI, WAKE_SECONDARY_VIA_INIT and
WAKE_SECONDARY_VIA_MIP are variants of a weird and fragile
preprocessor-driven "HAL" mechanisms to specify the kind of secondary-CPU
wakeup strategy a given x86 kernel will use.

The vast majority of systems want to use INIT for secondary wakeup - NUMAQ
uses an NMI, (old-style-) ES7000 uses 'MIP' (a firmware driven in-memory
flag to let secondaries continue).

So convert these mechanisms to x86_quirks and add a
->wakeup_secondary_cpu() method to specify the rare exception
to the sane default.

Extend genapic accordingly as well, for 32-bit.

While looking further, I noticed that functions in wakecup.h for numaq
and es7000 are different to the default in mach_wakecpu.h - but smpboot.c
will only use default mach_wakecpu.h with smphook.h.

So we need to add mach_wakecpu.h for mach_generic, to properly support
numaq and es7000, and vectorize the following SMP init methods:

	int trampoline_phys_low;
	int trampoline_phys_high;
	void (*wait_for_init_deassert)(atomic_t *deassert);
	void (*smp_callin_clear_local_apic)(void);
	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*inquire_remote_apic)(int apicid);
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

so we can merge io_apic_32.c and io_apic_64.c

v2: Use cpu_online_map as target cpus for bigsmp, just like 64-bit is doing.

Also remove some unused TARGET_CPUS macro.

v3: need to check if desc is null in smp_irq_move_cleanup

also migration needs to reset vector too, so copy __target_IO_APIC_irq
from 64bit.

(the duplication will go away once the two files are unified.)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

Use alternatives to select the workaround for the 11AP Pentium erratum
for the affected steppings on the fly rather than build time.  Remove the
X86_GOOD_APIC configuration option and replace all the calls to
apic_write_around() with plain apic_write(), protecting accesses to the
ESR as appropriate due to the 3AP Pentium erratum.  Remove
apic_read_around() and all its invocations altogether as not needed.
Remove apic_write_atomic() and all its implementing backends.  The use of
ASM_OUTPUT2() is not strictly needed for input constraints, but I have
used it for readability's sake.

I had the feeling no one else was brave enough to do it, so I went ahead
and here it is.  Verified by checking the generated assembly and tested
with both a 32-bit and a 64-bit configuration, also with the 11AP
"feature" forced on and verified with gdb on /proc/kcore to work as
expected (as an 11AP machines are quite hard to get hands on these days).
Some script complained about the use of "volatile", but apic_write() needs
it for the same reason and is effectively a replacement for writel(), so I
have disregarded it.

I am not sure what the policy wrt defconfig files is, they are generated
and there is risk of a conflict resulting from an unrelated change, so I
have left changes to them out.  The option will get removed from them at
the next run.

Some testing with machines other than mine will be needed to avoid some
stupid mistake, but despite its volume, the change is not really that
intrusive, so I am fairly confident that because it works for me, it will
everywhere.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

also remove GET_APIC_ID when read_apic_id is used.

need to apply after
	[PATCH] x86: mach_apicdef.h need to include before smp.h
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce a function to read the local APIC_ID.

This change is in preparation for additional changes to
the APICID functions that will come in a later patch.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This mapping already exists in x86_64, just provide it for
i386
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Bring the mpspec variants into sync to prepare merging and
paravirt support.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

o Commit 1833d6bc broke the build if
  compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n

arch/i386/kernel/built-in.o(.init.text+0x4fa9): In function `acpi_parse_madt':
: undefined reference to `acpi_madt_oem_check'
arch/i386/kernel/built-in.o(.init.text+0x7406): In function `smp_read_mpc':
: undefined reference to `mps_oem_check'
arch/i386/kernel/built-in.o(.init.text+0x8990): In function
`connect_bsp_APIC':
: undefined reference to `enable_apic_mode'
make: *** [.tmp_vmlinux1] Error 1

o Fix the build issue. Provided the definitions of missing functions.

o Don't have ES7000 machine. Only compile tested.

Cc: Len Brown <lenb@kernel.org>
Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

o Modpost generates warnings for i386 if compiled with CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.text:find_unisys_acpi_oem_table from .text between 'acpi_madt_oem_check' (at offset 0xc0101eda) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:acpi_get_table_header_early from .text between 'acpi_madt_oem_check' (at offset 0xc0101ef0) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'acpi_madt_oem_check' (at offset 0xc0101f2e) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:setup_unisys from .text between 'acpi_madt_oem_check' (at offset 0xc0101f37) and 'enable_apic_mode'WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'mps_oem_check' (at offset 0xc0101ec7) and 'acpi_madt_oem_check'
WARNING: vmlinux - Section mismatch: reference to .init.text:es7000_sw_apic from .text between 'enable_apic_mode' (at offset 0xc0101f48) and 'check_apicid_present'

o Some functions which are inline (acpi_madt_oem_check) are not inlined by
  compiler as these functions are accessed using function pointer. These
  functions are put in .text section and they in-turn access __init type
  functions hence modpost generates warnings.

o Do not iniline acpi_madt_oem_check, instead make it __init.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Default to physical mode on hotplug CPU kernels.  Furher simplify and clean up
the APIC initialization code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

There are some machines around (large xSeries or Unisys ES7000) that
need physical IO-APIC destination mode to access all of their IO
devices. This currently doesn't work in UP kernels as used in
distribution installers.

This patch allows to compile even UP kernels as GENERICARCH which
allows to use physical or clustered APIC mode.
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch is per Andi's request to remove NO_IOAPIC_CHECK from genapic and
use heuristics to prevent unique I/O APIC ID check for systems that don't
need it.  The patch disables unique I/O APIC ID check for Xeon-based and
other platforms that don't use serial APIC bus for interrupt delivery.
Andi stated that AMD systems don't need unique IO_APIC_IDs either.
Signed-off-by: NNatalie Protasevich <Natalie.Protasevich@unisys.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!