Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether
compatible ports, so recognize and expose them.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Acked-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This oops was recently reported to me:

invalid opcode: 0000 [#1] SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device
CPU 1
Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]

Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]
Pid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21
-[797251Z]-
RIP: 0010:[<ffffffffa058b270>]  [<ffffffffa058b270>] 0xffffffffa058b270
RSP: 0018:ffff880002083e48  EFLAGS: 00010246
RAX: ffff880002083e90 RBX: ffff88007ccd4000 RCX: 0000000000000000
RDX: 0000000000000100 RSI: dead000000200200 RDI: ffff8800007b8700
RBP: ffff880002083ed0 R08: ffff88000208db40 R09: 0000022d191d27c8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800007b9bc8
R13: ffff880002083e90 R14: ffff8800007b8700 R15: ffffffffa058b270
FS:  00007fbb3bcf7700(0000) GS:ffff880002080000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001664a98 CR3: 0000000060395000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process pidof (pid: 23900, threadinfo ffff8800007e8000, task ffff8800091c0040)
Stack:
 ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820
<0> ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000
<0> ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d
Call Trace:
 <IRQ>
 [<ffffffff81079f77>] ? run_timer_softirq+0x197/0x340
 [<ffffffff8109e010>] ? tick_sched_timer+0x0/0xc0
 [<ffffffff8102a00d>] ? lapic_next_event+0x1d/0x30
 [<ffffffff8106f737>] __do_softirq+0xb7/0x1e0
 [<ffffffff81092cc0>] ? hrtimer_interrupt+0x140/0x250
 [<ffffffff81185f90>] ? filldir+0x0/0xe0
 [<ffffffff8100c2cc>] call_softirq+0x1c/0x30
 [<ffffffff8100df05>] do_softirq+0x65/0xa0
 [<ffffffff8106f525>] irq_exit+0x85/0x90
 [<ffffffff814e3340>] smp_apic_timer_interrupt+0x70/0x9b
 [<ffffffff8100bc93>] apic_timer_interrupt+0x13/0x20
 <EOI>
 [<ffffffff81211ba5>] ? selinux_file_permission+0x45/0x150
 [<ffffffff81262a75>] ? _atomic_dec_and_lock+0x55/0x80
 [<ffffffff812050c6>] security_file_permission+0x16/0x20
 [<ffffffff811861c1>] vfs_readdir+0x71/0xe0
 [<ffffffff81186399>] sys_getdents+0x89/0xf0
 [<ffffffff8100b172>] system_call_fastpath+0x16/0x1b

It occured during some stress testing, in which the reporter was repeatedly
removing and modprobing the bnx2 module while doing various other random
operations on the bnx2 registered net device.  Noting that this error occured on
a serdes based device, we noted that there were a few ethtool operations (most
notably self_test and set_phys_id) that have execution paths that lead into
bnx2_setup_serdes_phy.  This function is notable because it executes a mod_timer
call, which starts the bp->timer running.  Currently bnx2 is setup to assume
that this timer only nees to be stopped when bnx2_close or bnx2_suspend is
called.  Since the above ethtool operations are not gated on the net device
having been opened however, that assumption is incorrect, and can lead to the
timer still running after the module has been removed, leading to the oops above
(as well as other simmilar oopses).

Fix the problem by ensuring that the timer is stopped when pci_device_unregister
is called.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NHushan Jia <hjia@redhat.com>
CC: Michael Chan <mchan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 88e6085 has a few differences from the other devices in the port
control registers, causing unknown multicast/broadcast packets to get
dropped when using the standard port setup.

At the same time update kconfig to clarify that the mv88e6085 is now
supported.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resubmit interrupt URB if device is open.  Use a flag set in
usbnet_open() to determine this state.  Also kill and free
interrupt URB in usbnet_disconnect().

[Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git]
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPsec extended sequence numbers can be used only with the new
anti-replay window implementation. So check if the new implementation
is used if an esn state is inserted and return an error if it is not.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we use IPsec extended sequence numbers, we may overwrite
the last scatterlist of the associated data by the scatterlist
for the skb. This patch fixes this by placing the scatterlist
for the skb right behind the last scatterlist of the associated
data. esp4 does it already like that.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On replay initialization, we compute the size of the replay
buffer to see if the replay window fits into the buffer.
This computation lacks a mutliplication by 8 because we need
the size in bit, not in byte. So we might return an error
even though the replay window would fit into the buffer.
This patch fixes this issue.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 62fa8a84 (net: Implement read-only protection and COW'ing
of metrics.) the kernel throws an oops.

[  101.620985] BUG: unable to handle kernel NULL pointer dereference at
           (null)
[  101.621050] IP: [<          (null)>]           (null)
[  101.621084] PGD 6e53c067 PUD 3dd6a067 PMD 0
[  101.621122] Oops: 0010 [#1] SMP
[  101.621153] last sysfs file: /sys/devices/virtual/ppp/ppp/uevent
[  101.621192] CPU 2
[  101.621206] Modules linked in: l2tp_ppp pppox ppp_generic slhc
l2tp_netlink l2tp_core deflate zlib_deflate twofish_x86_64
twofish_common des_generic cbc ecb sha1_generic hmac af_key
iptable_filter snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device loop
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_pcm snd_timer snd i2c_i801 iTCO_wdt psmouse soundcore snd_page_alloc
evdev uhci_hcd ehci_hcd thermal
[  101.621552]
[  101.621567] Pid: 5129, comm: openl2tpd Not tainted 2.6.39-rc4-Quad #3
Gigabyte Technology Co., Ltd. G33-DS3R/G33-DS3R
[  101.621637] RIP: 0010:[<0000000000000000>]  [<          (null)>]   (null)
[  101.621684] RSP: 0018:ffff88003ddeba60  EFLAGS: 00010202
[  101.621716] RAX: ffff88003ddb5600 RBX: ffff88003ddb5600 RCX:
0000000000000020
[  101.621758] RDX: ffffffff81a69a00 RSI: ffffffff81b7ee61 RDI:
ffff88003ddb5600
[  101.621800] RBP: ffff8800537cd900 R08: 0000000000000000 R09:
ffff88003ddb5600
[  101.621840] R10: 0000000000000005 R11: 0000000000014b38 R12:
ffff88003ddb5600
[  101.621881] R13: ffffffff81b7e480 R14: ffffffff81b7e8b8 R15:
ffff88003ddebad8
[  101.621924] FS:  00007f06e4182700(0000) GS:ffff88007fd00000(0000)
knlGS:0000000000000000
[  101.621971] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  101.622005] CR2: 0000000000000000 CR3: 0000000045274000 CR4:
00000000000006e0
[  101.622046] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[  101.622087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[  101.622129] Process openl2tpd (pid: 5129, threadinfo
ffff88003ddea000, task ffff88003de9a280)
[  101.622177] Stack:
[  101.622191]  ffffffff81447efa ffff88007d3ded80 ffff88003de9a280
ffff88007d3ded80
[  101.622245]  0000000000000001 ffff88003ddebbb8 ffffffff8148d5a7
0000000000000212
[  101.622299]  ffff88003dcea000 ffff88003dcea188 ffffffff00000001
ffffffff81b7e480
[  101.622353] Call Trace:
[  101.622374]  [<ffffffff81447efa>] ? ipv4_blackhole_route+0x1ba/0x210
[  101.622415]  [<ffffffff8148d5a7>] ? xfrm_lookup+0x417/0x510
[  101.622450]  [<ffffffff8127672a>] ? extract_buf+0x9a/0x140
[  101.622485]  [<ffffffff8144c6a0>] ? __ip_flush_pending_frames+0x70/0x70
[  101.622526]  [<ffffffff8146fbbf>] ? udp_sendmsg+0x62f/0x810
[  101.622562]  [<ffffffff813f98a6>] ? sock_sendmsg+0x116/0x130
[  101.622599]  [<ffffffff8109df58>] ? find_get_page+0x18/0x90
[  101.622633]  [<ffffffff8109fd6a>] ? filemap_fault+0x12a/0x4b0
[  101.622668]  [<ffffffff813fb5c4>] ? move_addr_to_kernel+0x64/0x90
[  101.622706]  [<ffffffff81405d5a>] ? verify_iovec+0x7a/0xf0
[  101.622739]  [<ffffffff813fc772>] ? sys_sendmsg+0x292/0x420
[  101.622774]  [<ffffffff810b994a>] ? handle_pte_fault+0x8a/0x7c0
[  101.622810]  [<ffffffff810b76fe>] ? __pte_alloc+0xae/0x130
[  101.622844]  [<ffffffff810ba2f8>] ? handle_mm_fault+0x138/0x380
[  101.622880]  [<ffffffff81024af9>] ? do_page_fault+0x189/0x410
[  101.622915]  [<ffffffff813fbe03>] ? sys_getsockname+0xf3/0x110
[  101.622952]  [<ffffffff81450c4d>] ? ip_setsockopt+0x4d/0xa0
[  101.622986]  [<ffffffff813f9932>] ? sockfd_lookup_light+0x22/0x90
[  101.623024]  [<ffffffff814b61fb>] ? system_call_fastpath+0x16/0x1b
[  101.623060] Code:  Bad RIP value.
[  101.623090] RIP  [<          (null)>]           (null)
[  101.623125]  RSP <ffff88003ddeba60>
[  101.623146] CR2: 0000000000000000
[  101.650871] ---[ end trace ca3856a7d8e8dad4 ]---
[  101.651011] __sk_free: optmem leakage (160 bytes) detected.

The oops happens in dst_metrics_write_ptr()
include/net/dst.h:124: return dst->ops->cow_metrics(dst, p);

dst->ops->cow_metrics is NULL and causes the oops.

Provide cow_metrics() methods, like we did in commit 214f45c9
(net: provide default_advmss() methods to blackhole dst_ops)
Signed-off-by: NHeld Bernhard <berny156@gmx.de>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The default maximum transmit length for NCM USB frames should be so
that a short packet happens at the end if the device supports a length
greater than the defined maximum. This is achieved by adding 4 bytes
to the maximum length so that the existing logic can fit a short
packet there.
Signed-off-by: NHans Petter Selasky <hselasky@c2i.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware is cached during the first successfull call to open() and
released once the network device is unregistered. The driver uses the
cached firmware between open() and unregister_netdev().

So far the firmware is optional : a failure to load the firmware does
not prevent open() to success. It is thus necessary to 1) unregister
all 816x / 810[23] devices and 2) force a driver probe to issue a new
firmware load.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Fixed-by: NCiprian Docan <docan@eden.rutgers.edu>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>

Fixed packets parameters for FW in UDP checksum offload flow.

Do not dereference TCP headers on non TCP frames.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A deadlock was reported to me recently that occured when netconsole was being
used in a virtual guest.  If the virtio_net driver was removed while netconsole
was setup to use an interface that was driven by that driver, the guest
deadlocked.  No backtrace was provided because netconsole was the only console
configured, but it became clear pretty quickly what the problem was.  In
netconsole_netdev_event, if we get an unregister event, we call
__netpoll_cleanup with the target_list_lock held and irqs disabled.
__netpoll_cleanup can, if pending netpoll packets are waiting call
cancel_delayed_work_sync, which is a sleeping path.  the might_sleep call in
that path gets triggered, causing a console warning to be issued.  The
netconsole write handler of course tries to take the target_list_lock again,
which we already hold, causing deadlock.

The fix is pretty striaghtforward.  Simply drop the target_list_lock and
re-enable irqs prior to calling __netpoll_cleanup, the re-acquire the lock, and
restart the loop.  Confirmed by myself to fix the problem reported.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 1e253c3b.

It breaks 802.3ad bonding inside of a bridge.

The commit was meant to support transport bridging, and specifically
virtual machines bridged to an ethernet interface connected to a
switch port wiht 802.1x enabled.

But this isn't the way to do it, it breaks too many other things.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mechanism used to initiate work events from the interrupt
handler has a classic read/modify/write race between the interrupt
handler that sets the condition, and the worker task that reads and
clears the condition. Close these races by using atomic
bit fields.

Cc: stable@kernel.org
Cc: Jie Yang <jie.yang@atheros.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 609ff3bb ("be2net: add code to display temperature of ASIC")
adds support to display temperature of ASIC but there is missing
increment of work_counter in be_worker. Because of this 1) the
function be_cmd_get_die_temperature is called every 1 second instead
of every 32 seconds 2) be_cmd_get_die_temperature is called, although
it is not supported.  This patch fixes this bug.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The changes introduced with git-commit a02e4b7d ("ipv6: Demark default
hoplimit as zero.") missed to remove the hoplimit initialization. As a
result, ipv6_get_mtu interprets the return value of dst_metric_raw
(-1) as 255 and answers ping6 with this hoplimit.  This patche removes
the line such that ping6 is answered with the hoplimit value
configured via sysctl.
Signed-off-by: NThomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mac-fec.c was setting individual UDP address registers instead of multicast
group address registers when joining a multicast group.
This prevented from correctly receiving UDP multicast packets.
According to datasheet, replaced hash_table_high and hash_table_low
with grp_hash_table_high and grp_hash_table_low respectively.
Also renamed hash_table_* with grp_hash_table_* in struct fec declaration
for 8xx: these registers are used only for multicast there.

Tested on a MPC5121 based board.
Build tested also against mpc866_ads_defconfig.
Signed-off-by: NAndrea Galbusera <gizero@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At this point, skb->data points to skb_transport_header.
So, headroom check is wrong.

For some case:bridge(UFO is on) + eth device(UFO is off),
there is no enough headroom for IPv6 frag head.
But headroom check is always false.

This will bring about data be moved to there prior to skb->head,
when adding IPv6 frag header to skb.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since

commit a120e912
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Feb 19 15:47:33 2010 -0800

    iwlwifi: sanity check before counting number of tfds can be free

we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.

On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link, making bisection of other problems impossible.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Since

commit a120e912
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Feb 19 15:47:33 2010 -0800

    iwlwifi: sanity check before counting number of tfds can be free

we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.

On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link.

Cc: stable@kernel.org # 2.6.32+
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The locking with SMPS requests means that the
debugs file should lock the mgd mutex, not the
iflist mutex. Calls to __ieee80211_request_smps()
need to hold that mutex, so add an assertion.

This has always been wrong, but for some reason
never been noticed, probably because the locking
error only happens while unassociated.

Cc: stable@kernel.org [2.6.34+]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

v2: added space after 'if' according code style.

We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.

Thanks to Dave Jones pointing at this issue in net/can/bcm.c
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The slave member of struct aggregator does not necessarily point
to a slave which is part of the aggregator. It points to the
slave structure containing the aggregator structure, while
completely different slaves (or no slaves at all) may be part of
the aggregator.

The agg_device_up() function wrongly uses agg->slave to find the state
of the aggregator.  Use agg->lag_ports->slave instead. The bug has
been introduced by commit 4cd6fe1c
("bonding: fix link down handling in 802.3ad mode").
Signed-off-by: NJiri Bohac <jbohac@suse.cz>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are currently continuing if ehea_restart_qps() fails, when we
do a memory DLPAR (remove or add more memory to the system).

This patch just let the NAPI disabled if the ehea_restart_qps()
fails.
Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch 'ath9k_hw: fix stopping rx DMA during resets' added code to detect
a condition where rx DMA was stopped, but the MAC failed to enter the idle
state. This condition requires a hardware reset, however the return value
of ath_stoprecv was 'true' in that case, which allowed it to skip the reset
when issuing a fast channel change.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Reported-by: NPaul Stewart <pstew@google.com>
Cc: stable@kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

A restoreable saving of sets requires that list:set type of sets
come last and the code part which should have taken into account
the ordering was broken. The patch fixes the listing order.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

When retrasmitting one frame, only SAR bits in control field should
be kept.
Signed-off-by: NRuiyi Zhang <Ruiyi.zhang@atheros.com>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

shutdown should wait for SCO link to be properly disconnected before
detroying the socket, otherwise an application using the socket may
assume link is properly disconnected before it really happens which
can be a problem when e.g synchronizing profile switch.
Signed-off-by: NLuiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

In the teardown path the reset command is sent to the controller,
this event causes the command timer to be reactivated.

So the timer is removed in two situations, when the adapter isn't
marked as UP and when we know that some command has been sent.
Reported-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

hci_io_capa_reply_evt() holds reference for hciconnection. It's useless since
hci_io_capa_request_evt()/hci_simple_pair_complete_evt() already protects the
connection. In addition it leaves connection open after failed SSP pairing.
Signed-off-by: NVille Tervo <ville.tervo@nokia.com>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

For some reason, sending QoS configuration causes transmission to stop
after a single frame on HT channels when not associated. Removing the
extra QoS configuration has no effect on station mode, and fixes
injection mode.
Signed-off-by: NDaniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>

Several tests in the ipv6 routing code check IFF_LOOPBACK, and
allowing stacking such as VLAN'ing on top of loopback results in a
netdevice which reports IFF_LOOPBACK but really isn't the loopback
device.

Instead of spamming the ipv6 routing code with even more special tests,
simply disallow VLAN over loopback.

The result of this patch is:

# modprobe 8021q
# vconfig add lo 43
ERROR: trying to add VLAN #43 to IF -:lo:-  error: Operation not supported
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes port identification on optic devices when there's no link on the port.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Per Hayes's request.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Scot Doyle demonstrated ip_options_compile() could be called with an skb
without an attached route, using a setup involving a bridge, netfilter,
and forged IP packets.

Let's make ip_options_compile() and ip_options_rcv_srr() a bit more
robust, instead of changing bridge/netfilter code.

With help from Hiroaki SHIMODA.
Reported-by: NScot Doyle <lkml@scotdoyle.com>
Tested-by: NScot Doyle <lkml@scotdoyle.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>