- 17 5月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
Last round hopefully of cpu_core_id changes hopefully fow now: - Always initialize cpu_core_id for all CPUs, even when no dual core setup is detected. This prevents funny /proc/cpuinfo output - Do the same with phys_proc_id[] even when no HyperThreading - dito. - Use the CPU APIC-ID from CPUID 1 instead of the linux virtual CPU number to identify the core for AMD dual core setups. Patch for i386/x86-64. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 5月, 2005 1 次提交
-
-
由 maximilian attems 提交于
Fix cyrix section references: convert __initdata to __devinitdata. Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 00000379 R_386_32 .init.data Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 00000399 R_386_32 .init.data Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 000003b3 R_386_32 .init.data Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 000003b9 R_386_32 .init.data Error: ./arch/i386/kernel/cpu/mtrr/cyrix.o .text refers to 000003bf R_386_32 .init.data Signed-of-by: Nmaximilian attems <janitor@sternwelten.at> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 3 次提交
-
-
由 Adrian Bunk 提交于
Another large rollup of various patches from Adrian which make things static where they were needlessly exported. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zwane Mwaikambo 提交于
http://bugme.osdl.org/show_bug.cgi?id=4426 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP stepping : 0 cpu MHz : 2204.807 <snipped> cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow bogomips : 4358.14 We're marking bit 0 of extended function 0x80000001 cpuid as PNI support on AMD processors, when it actually denotes x87 FPU present. Patch for i386 and x86_64 below. Signed-off-by: NZwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Lee Revell 提交于
Enable write combining for server works LE rev > 6 per http://www.ussg.iu.edu/hypermail/linux/kernel/0104.3/1007.htmlSigned-Off-By: NLee Revell <rlrevell@joe-job.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 4月, 2005 1 次提交
-
-
由 James Bottomley 提交于
The patch to arch/i386/kernel/cpu/amd.c relies on the variable cpu_core_id which is defined in i386/kernel/smpboot.c. This means it is only present if CONFIG_X86_SMP is defined, not CONFIG_SMP (alternative SMP harnesses won't have it, which is why it breaks voyager). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 7 次提交
-
-
由 Siddha, Suresh B 提交于
- broken sibling_map setup in x86_64 - grouping all the core and HT related cpuinfo fields. We are reasonably sure that adding new cpuinfo fields after "siblings" field, will not cause any app failure. Thats because today's /proc/cpuinfo format is completely different on x86, x86_64 and we haven't heard of any x86 app breakage because of this issue. Grouping these fields will result in more or less common format on all architectures (ia64, x86 and x86_64) and will cause less confusion. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Clean up the code greatly. Now uses the infrastructure from the Intel dual core patch Should fix a final bug noticed by Tyan of not detecting the nodes correctly in some corner cases. Patch for x86-64 and i386 Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Appended patch adds the support for Intel dual-core detection and displaying the core related information in /proc/cpuinfo. It adds two new fields "core id" and "cpu cores" to x86 /proc/cpuinfo and the "core id" field for x86_64("cpu cores" field is already present in x86_64). Number of processor cores in a die is detected using cpuid(4) and this is documented in IA-32 Intel Architecture Software Developer's Manual (vol 2a) (http://developer.intel.com/design/pentium4/manuals/index_new.htm#sdm_vol2a) This patch also adds cpu_core_map similar to cpu_sibling_map. Slightly hacked by AK. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Siddha, Suresh B 提交于
We need to use the size_and_mask in set_mtrr_var_ranges(which is called while programming MTRR's for AP's Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It doesn't make sense to only do this only for AMD K8. This would support future CPUs with extended address spaces properly. For i386 and x86-64 Cc: <davej@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Only display physical id/siblings when there are siblings or dual core. In 2.6.11 I accidentially broke it and it was always displaying these fields But for compatibility to all these /proc parsers around it is better to do it in the old way again. Noticed by Suresh Siddha Cc: <Suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-