The CFA world has some additional rules and drive modes we need to support for
newer expansion cards and on embedded boxes
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Hi,

Reading the Intel VSC and AHCI it seems like writing 0x302 is incorrect.
The only valid values are 4, 1 and 0.  Writing 4 disables the
PHY.
Signed-off-by: NMartin Hicks <mort@bork.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

pdc_adma was overlooked and broken by the irq-pio patch:
Only HSM_ST_LAST interrupts should be delivered to this LLDD.

Adding ATA_FLAG_PIO_POLLING to pdc_adma fixes the problem (temporarily),
before we convert the irq handler of pdc_adma to handle all interrupts.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Also, moved ATA_MAX_SECTORS and ATA_MAX_SECTORS_LBA48 from
linux/libata.h to linux/ata.h, now that they truly reflect the standard
(well... mostly; note TODO comment).

This changes the performance profile (and potential bug profile)
for a bunch of drivers, so be wary.

Replace pci_module_init() with pci_register_driver().
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NTejun Heo <htejun@gmail.com>

Kill unused probe_ent/ap->hard_port_no and probe_ent->legacy_mode.
Signed-off-by: NTejun Heo <htejun@gmail.com>

Replace ap->hard_port_no with ap->port_no.
Signed-off-by: NTejun Heo <htejun@gmail.com>

Use dummy port for stolen legacy ports.  This makes ap->port_no always
equal ap->hard_port_no.
Signed-off-by: NTejun Heo <htejun@gmail.com>

Implement dummy port which can be requested by setting appropriate bit
in probe_ent->dummy_port_mask.  The dummy port is used as placeholder
for stolen legacy port.  This allows libata to guarantee that
index_of(ap) == ap->port_no == actual_device_port_no, and thus to
remove error-prone ap->hard_port_no.

As it's used only when one port of a legacy controller is reserved by
some other entity (e.g. IDE), the focus is on keeping the added *code*
complexity at minimum, so dummy port allocates all libata core
resources and acts as a normal port.  It just has all dummy port_ops.

This patch only implements dummy port.  The following patch will make
libata use it for stolen legacy ports.
Signed-off-by: NTejun Heo <htejun@gmail.com>

Kill host_set->next
Fix simplex support
Allow per platform setting of IDE legacy bases

Some of this can be tidied further later on, in particular all the
legacy port gunge belongs as a PCI quirk/PCI header decode to understand
the special legacy IDE rules in the PCI spec.

Longer term Jeff also wants to move the request_irq/free_irq out of core
which will make this even cleaner.

tj: folded in three followup patches - ata_piix-fix, broken-arch-fix
and fix-new-legacy-handling, and separated per-dev xfermask into
separate patch preceding this one.  Folded in fixes are...

* ata_piix-fix: fix build failure due to host_set->next removal
* broken-arch-fix: add missing include/asm-*/libata-portmap.h
* fix-new-legacy-handling:
	* In ata_pci_init_legacy_port(), probe_num was incorrectly
          incremented during initialization of the secondary port and
          probe_ent->n_ports was incorrectly fixed to 1.

	* Both legacy ports ended up having the same hard_port_no.

	* When printing port information, both legacy ports printed
	  the first irq.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTejun Heo <htejun@gmail.com>

Implement per-dev xfermask.  libata used to determine xfermask
per-port - the fastest mode of the slowest device on the port.  This
patch enables per-dev xfermask.

Original patch is from Alan Cox <alan@redhat.com>.  The following
changes are made by me.

* simplex warning message is added
* remove disabled device handling code which is never invoked
  (originally for choosing port-wide lowest PIO mode)

Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>

Eliminate redundant loop variable 'count'
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NTejun Heo <htejun@gmail.com>

s/ata_host_add/ata_port_add/
s/ata_host_init/ata_port_init/

libata naming got stuck in the middle of a Great Renaming:

	ata_host -> ata_port
	ata_host_set -> ata_host

To eliminate confusion, let's just give up for now, and simply ensure
that things are internally consistent.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NTejun Heo <htejun@gmail.com>

Update ata_host_init() such that it only initializes SCSI host related
stuff and doesn't call into ata_port_init(), and rename it to
ata_port_init_shost().
Signed-off-by: NTejun Heo <htejun@gmail.com>

SCSI EH locks door if sdev->locked is set.  Sometimes door lock
command fails continuously (e.g. when medium is not present) and as
libata uses EH to acquire sense data, this easily creates a loop where
a failed lock door invokes EH and EH issues lock door on completion.

This patch clears sdev->locked on door lock failure to break this
loop.  This problem has been spotted and diagnosed by Unicorn Chang
<uchang@tw.ibm.com>.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix a sata debug print statement that still uses an old variable name.
Signed-off-by: NKeith Owens <kaos@ocs.com.au>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Initial IRQ mask clearing is done by libata-core by freezing all ports
prior to requesting IRQ.  Remove redundant IRQ clearing from
init_controller().
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The following patch enhances libata to allow SAS device drivers
to utilize libata to talk to SATA devices. It introduces some
new APIs which allow libata to be used without allocating a
virtual scsi host.

New APIs:

ata_sas_port_alloc - Allocate an ata_port
ata_sas_port_init - Initialize an ata_port (probe device, etc)
ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc
ata_sas_slave_configure - configure scsi device
ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand

These new APIs can be used either directly by a SAS LLDD or could be used
by the SAS transport class.

Possible usage for a SAS LLDD would be:

scsi_scan_host
	target_alloc
		ata_sas_port_alloc
	slave_alloc
		ata_sas_port_init
	slave_configure
		ata_sas_slave_configure

Commands received by the LLDD for SATA devices would call ata_sas_queuecmd.

Device teardown would occur with:

slave_destroy
	port_disable
target_destroy
	ata_sas_port_destroy
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Move ata_probe_ent_alloc to libata-core. It will also be used by
future SAS/SATA integration patches.
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Separate out the ata_port initialization from ata_host_init
so that it can be used in future SAS patches.
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add ata_host_set_init in preparation for SAS attached SATA.
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: ati_remote - use msec instead of jiffies
  Input: ati_remote - add missing input_sync()
  Input: ati_remote - relax permissions sysfs module parameters
  Input: ati_remote - make filter time a module parameter
  Input: atkbd - restore repeat rate when resuming
  Input: trackpoint - activate protocol when resuming
  Input: logips2pp - fix button mapping for MX300
  Input: keyboard - change to use kzalloc
  Input: serio/gameport - check whether driver core calls succeeded
  Input: spaceball - make 4000FLX Lefty work
  Input: keyboard - simplify emulate_raw() implementation
  Input: keyboard - remove static variable and clean up initialization
  Input: hiddev - use standard list implementation
  Input: add missing handler->start() call
  Input: HID - fix potential out-of-bound array access
  Input: fix list iteration in input_release_device()
  Input: iforce - add Trust Force Feedback Race Master support
  Input: iforce - check array bounds before accessing elements
  Input: libps2 - warn instead of oopsing when passed bad arguments
  Input: fm801-gp - fix use after free
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] Don't reject O_RDWR at opening PCM OSS with read/write-only device
  [ALSA] snd-emu10k1: Implement support for Audigy 2 ZS [SB0353]
  [ALSA] add MAINTAINERS entry for snd-aoa
  [ALSA] aoa: platform function gpio: ignore errors from functions that don't exist
  [ALSA] make snd-powermac load even when it can't bind the device
  [ALSA] aoa: fix toonie codec
  [ALSA] aoa: feature gpio layer: fix IRQ access
  [ALSA] Conversions from kmalloc+memset to k(z|c)alloc
  [ALSA] snd-emu10k1: Fixes ALSA bug#2190

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [LAPB]: Fix windowsize check
  [TCP]: Fixes IW > 2 cases when TCP is application limited
  [PKT_SCHED] RED: Fix overflow in calculation of queue average
  [LLX]: SOCK_DGRAM interface fixes
  [PKT_SCHED]: Return ENOENT if qdisc module is unavailable
  [BRIDGE]: netlink status fix

While busy-waiting for completion, check the hardware after scheduling;
don't schedule and then immediately check the _timeout_.  If the yield()
took a long time (as it does on my OLPC prototype board when it's busy),
we'd report a timeout even though the hardware was now ready.

This fixes it, and also switches the yield() for a cond_resched() because
we don't actually want to be _that_ nice about it.  I see nice
tightly-packed SMBus transactions now, rather than waiting for milliseconds
between successive phases.

Actually, we shouldn't be busy-waiting here at all.  We should be using
interrupts.  That's an exercise for another day though.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Christer Weinigel <wingel@nano-system.com>
Cc: <Jordan.Crouse@amd.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I saw an oops down this path when trying to create a new file on a UDF
filesystem which was internally marked as readonly, but mounted rw:

udf_create
        udf_new_inode
                new_inode
                        alloc_inode
                        	udf_alloc_inode
                udf_new_block
                        returns EIO due to readonlyness
                iput (on error)
                        udf_put_inode
                                udf_discard_prealloc
                                        udf_next_aext
                                                udf_current_aext
                                                        udf_get_fileshortad
                                                                OOPS

the udf_discard_prealloc() path was examining uninitialized fields of the
udf inode.

udf_discard_prealloc() already has this code to short-circuit the discard
path if no extents are preallocated:

        if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ||
                inode->i_size == UDF_I_LENEXTENTS(inode))
        {
                return;
        }

so if we initialize UDF_I_LENEXTENTS(inode) = 0 earlier in udf_new_inode,
we won't try to free the (not) preallocated blocks, since this will match
the i_size = 0 set when the inode was initialized.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent fixups in futex.c need to be applied to futex_compat.c too.  Fixes
a hang reported by Olaf.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Olaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A patch in -mm kernel correct the parsing of "address resources" of pnpacpi.
Before we assumed it was memory only, but it could be also IO.

But this change show an hidden bug : some resources could be producer type
that are not handled by pnp layer.  So we should ignore the producer
resources.

This patch fixes bug 6292 (http://bugzilla.kernel.org/show_bug.cgi?id=6292).
Some devices like PNP0A03 have 0xd00-0xffff and 0x0-0xcf7 as IO producer
resources.

Before correcting "address resources" parsing, it was seen as memory and was
harmless, because nobody tried to reserve this memory range as it should be
IO.

With the correction it become IO resources, and make failed all others device
that want to register IO in this range and use pnp layer (like a ISA sound
card).

The solution is to ignore producer resources
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: NUwe Bugla <uwe.bugla@gmx.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: "Brown, Len" <len.brown@intel.com>
Acked-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

reiserfs_write_full_page does zero bytes in the file past eof, but it may
call get_block on those buffers as well.  On machines where the page size
is larger than the blocksize, this can result in mmaped files incorrectly
growing up to a block boundary during writepage.

The fix is to avoid calling get_block for any blocks that are entirely past
eof
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The correct lock ordering is inode lock -> BKL
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>