The code to store the "lost events" requires knowing the real end
of the page. Since the 'commit' includes the padding at the end of
a page a "real_end" variable was used to keep track of the end not
including the padding.

If events were lost, the reader can place the count of events in
the padded area if there is enough room.

The bug this patch fixes is that when we fill the page we do not
reset the real_end variable, and if the writer had wrapped a few
times, the real_end would be incorrect.

This patch simply resets the real_end if the page was filled.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Patch b7e2ecef (perf, trace: Optimize tracepoints by removing
IRQ-disable from perf/tracepoint interaction) made the
unfortunate mistake of assuming the world is x86 only, correct
this.

The problem was that perf_fetch_caller_regs() did
local_save_flags() into regs->flags, and I re-used that to
remove another local_save_flags(), forgetting !x86 doesn't have
regs->flags.

Do the reverse, remove the local_save_flags() from
perf_fetch_caller_regs() and let the ftrace site do the
local_save_flags() instead.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: acme@redhat.com
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1274778175.5882.623.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Avoid the swevent hash-table by using per-tracepoint
hlists.

Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Improves performance.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274259525.5605.10352.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NIngo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

ftrace_trace_stack() and frace_trace_userstacke() take a
struct ring_buffer argument, not struct trace_array. Commit
e77405ad("tracing: pass around ring buffer instead of tracer")
made this change.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BE77C14.5010806@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4894944	1018052	 861512	6774508	 675eec	vmlinux.id
4894871	1012292	 861512	6768675	 674823	vmlinux.flags

This gives us another 5K in savings.

The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.

Note: Although Mathieu gave his Acked-by, he would like it documented
 that the reads of flags are not protected by the mutex. The way the
 code works, these reads will not break anything, but will have a
 residual effect. Since this behavior is the same even before this
 patch, describing this situation is left to another patch, as this
 patch does not change the behavior, but just brought it to Mathieu's
 attention.

v2: Updated the event trace self test to for this change.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.

Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print
4894944	1018052	 861512	6774508	 675eec	vmlinux.id
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, every event has its own trace_event structure. This is
fine since the structure is needed anyway. But the print function
structure (trace_event_functions) is now separate. Since the output
of the trace event is done by the class (with the exception of events
defined by DEFINE_EVENT_PRINT), it makes sense to have the class
define the print functions that all events in the class can use.

This makes a bigger deal with the syscall events since all syscall events
use the same class. The savings here is another 30K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print

To accomplish this, and to let the class know what event is being
printed, the event structure is embedded in the ftrace_event_call
structure. This should not be an issues since the event structure
was created for each event anyway.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.

The event itself is now passed to the print function to let the print
function know what kind of event it should print.

This opens the door to consolidating the way several events print
their output.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint

This change slightly increases the size but is needed for the next change.

v3: Fix the branch tracer events to handle this change.

v2: Fix the new function graph tracer event calls to handle this change.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The raw_init function pointer in the event is used to initialize
various kinds of events. The type of initialization needed is usually
classed to the kind of event it is.

Two events with the same class will always have the same initialization
function, so it makes sense to move this to the class structure.

Perhaps even making a special system structure would work since
the initialization is the same for all events within a system.
But since there's no system structure (yet), this will just move it
to the class.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init

The text grew very slightly, but this is a constant growth that happened
with the changing of the C files that call the init code.
The bigger savings is the data which will be saved the more events share
a class.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.

After this change the size of the kernel dropped another 3K:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields

Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.

Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.

The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.

The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.

v2:  Fixed the syscall fields. The syscall metadata needs a list
     of fields for both enter and exit.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.

The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.

The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.

To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.

With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs

The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.

v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
    specific structure in trace_events.c.

v4: Fixed trace self tests to check probe because regfunc no longer
    exists.

v3: Updated to handle void *data in beginning of probe parameters.
    Also added the tracepoint: check_trace_callback_type_##call().

v2: Changed the callback probes to pass void * and typecast the
    value within the function.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch creates a ftrace_event_class struct that event structs point to.
This class struct will be made to hold information to modify the
events. Currently the class struct only holds the events system name.

This patch slightly increases the size, but this change lays the ground work
of other changes to make the footprint of tracepoints smaller.

With 82 standard tracepoints, and 618 system call tracepoints
(two tracepoints per syscall: enter and exit):

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class

This patch also cleans up some stale comments in ftrace.h.

v2: Fixed missing semi-colon in macro.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

struct rq isn't visible outside of sched.o so its near useless to
expose the pointer, also there are no users of it, so remove it.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272997616.1642.207.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The original code doesn't work because "call" is never NULL there.
Signed-off-by: NDan Carpenter <error27@gmail.com>
LKML-Reference: <20100320143911.GF5331@bicker>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

kernel/trace/trace_output.c:256:24: warning: Using plain integer as NULL pointer
Signed-off-by: NThiago Farina <tfransosi@gmail.com>
LKML-Reference: <1264349038-1766-3-git-send-email-tfransosi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Wrap open-coded WARN_ONCE functionality into the equivalent macro.
Signed-off-by: NBorislav Petkov <bp@alien8.de>
LKML-Reference: <20100502060354.GA5281@liondog.tnic>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The breakpoint generic layer assumes that archs always know in advance
the static number of address registers available to host breakpoints
through the HBP_NUM macro.

However this is not true for every archs. For example Arm needs to get
this information dynamically to handle the compatiblity between
different versions.

To solve this, this patch proposes to drop the static HBP_NUM macro
and let the arch provide the number of available slots through a
new hw_breakpoint_slots() function. For archs that have
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS selected, it will be called once
as the number of registers fits for instruction and data breakpoints
together.
For the others it will be called first to get the number of
instruction breakpoint registers and another time to get the
data breakpoint registers, the targeted type is given as a
parameter of hw_breakpoint_slots().
Reported-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>

When sleep_time is off the function profiler ignores the time that a task
is scheduled out. When the task is scheduled out a timestamp is taken.
When the task is scheduled back in, the timestamp is compared to the
current time and the saved calltimes are adjusted accordingly.

But when stopping the function profiler, the sched switch hook that
does this adjustment was stopped before shutting down the tracer.
This allowed some tasks to not get their timestamps set when they
scheduled out. When the function profiler started again, this would
skew the times of the scheduler functions.

This patch moves the stopping of the sched switch to after the function
profiler is stopped. It also ignores zero set calltimes, which may
happen on start up.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When combined with function graph tracing the ftrace function profiler
also prints the average run time of functions. While this gives us some
good information, it doesn't tell us anything about the variance of the
run times of the function. This change prints out the s^2 sample
standard deviation alongside the average.

This change adds one entry to the profile record structure. This
increases the memory footprint of the function profiler by 1/3 on a
32-bit system, and by 1/5 on a 64-bit system when function graphing is
enabled, though the memory is only allocated when the profiler is turned
on. During the profiling, one extra line of code adds the squared
calltime to the new record entry, so this should not adversly affect
performance.

Note that the square of the sample standard deviation is printed because
there is no sqrt implementation for unsigned long long in the kernel.
Signed-off-by: NChase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1272304925-2436-1-git-send-email-chase.douglas@canonical.com>

[ fixed comment about ns^2 -> us^2 conversion ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the addition of the "missed events" flags that is stored in the
commit field of the ring buffer page, the ring_buffer_benchmark
was not updated to handle this. If events are missed, then the
missed events flag is set in the ring buffer page, the benchmark
will count that flag as part of the size of the page and will hit the BUG()
when it tries to read beyond the page.

The solution is simply to have the ring buffer benchmark mask off
the extra bits.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When performing a non-consuming read, a synchronize_sched() is
performed once for every cpu which is actively tracing.

This is very expensive, and can make it take several seconds to open
up the 'trace' file with lots of cpus.

Only one synchronize_sched() call is actually necessary.  What is
desired is for all cpus to see the disabling state change.  So we
transform the existing sequence:

	for_each_cpu() {
		ring_buffer_read_start();
	}

where each ring_buffer_start() call performs a synchronize_sched(),
into the following:

	for_each_cpu() {
		ring_buffer_read_prepare();
	}
	ring_buffer_read_prepare_sync();
	for_each_cpu() {
		ring_buffer_read_start();
	}

wherein only the single ring_buffer_read_prepare_sync() call needs to
do the synchronize_sched().

The first phase, via ring_buffer_read_prepare(), allocates the 'iter'
memory and increments ->record_disabled.

In the second phase, ring_buffer_read_prepare_sync() makes sure this
->record_disabled state is visible fully to all cpus.

And in the final third phase, the ring_buffer_read_start() calls reset
the 'iter' objects allocated in the first phase since we now know that
none of the cpus are adding trace entries any more.

This makes openning the 'trace' file nearly instantaneous on a
sparc64 Niagara2 box with 128 cpus tracing.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
LKML-Reference: <20100420.154711.11246950.davem@davemloft.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add function graph output to irqsoff tracer.

The graph output is enabled by setting new 'display-graph' trace option.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Let the function graph tracer have custom flags passed to its
output functions.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-3-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add ftrace events for graph tracer, so the graph output could be shared
with other tracers.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-2-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one
dump every cpu buffers when an oops or panic happens.

It's nice when you have few cpus but it may take ages if have many,
plus you miss the real origin of the problem in all the cpu traces.

Sometimes, all you need is to dump the cpu buffer that triggered the
opps, most of the time it is our main interest.

This patch modifies ftrace_dump_on_oops to handle this choice.

The ftrace_dump_on_oops kernel parameter, when it comes alone, has
the same behaviour than before. But ftrace_dump_on_oops=orig_cpu
will only dump the buffer of the cpu that oops'ed.

Similarly, sysctl kernel.ftrace_dump_on_oops=1 and
echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous
behaviour. But setting 2 jumps into cpu origin dump mode.

v2: Fix double setup
v3: Fix spelling issues reported by Randy Dunlap
v4: Also update __ftrace_dump in the selftests
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>

Support basic types of integer (u8, u16, u32, u64, s8, s16, s32, s64) in
kprobe tracer. With this patch, users can specify above basic types on
each arguments after ':'. If omitted, the argument type is set as
unsigned long (u32 or u64, arch-dependent).

 e.g.
  echo 'p account_system_time+0 hardirq_offset=%si:s32' > kprobe_events

  adds a probe recording hardirq_offset in signed-32bits value on the
  entry of account_system_time.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171708.3790.18599.stgit@localhost6.localdomain6>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Because a local variable is not initialized, I got these
when I did 'cat tracing/trace'. (not trace_pipe):

CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770221: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446612133255294080 EVENTS]
              ps-3099  [000]   560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770222: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770222: lock_release: ffffffff816cfb98 dcache_lock

See peek_next_entry(), it does not set *lost_events when we 'cat tracing/trace'
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4BB9A929.2000303@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace event buffer used by perf to record raw sample events
is typed as an array of char and may then not be aligned to 8
by alloc_percpu().

But we need it to be aligned to 8 in sparc64 because we cast
this buffer into a random structure type built by the TRACE_EVENT()
macro to store the traces. So if a random 64 bits field is accessed
inside, it may be not under an expected good alignment.

Use an array of long instead to force the appropriate alignment, and
perform a compile time check to ensure the size in byte of the buffer
is a multiple of sizeof(long) so that its actual size doesn't get
shrinked under us.

This fixes unaligned accesses reported while using perf lock
in sparc 64.
Suggested-by: NDavid Miller <davem@davemloft.net>
Suggested-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Steven Rostedt <rostedt@goodmis.org>

Currently, binary readers of the ring buffer only know where events were
lost, but not how many events were lost at that location.
This information is available, but it would require adding another
field to the sub buffer header to include it.

But when a event can not fit at the end of a sub buffer, it is written
to the next sub buffer. This means there is a good chance that the
buffer may have room to hold this counter. If it does, write
the counter at the end of the sub buffer and set another flag
in the data size field that states that this information exists.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now that the ring buffer can keep track of where events are lost.
Use this information to the output of trace_pipe:

       hackbench-3588  [001]  1326.701660: lock_acquire: ffffffff816591e0 read rcu_read_lock
       hackbench-3588  [001]  1326.701661: lock_acquire: ffff88003f4091f0 &(&dentry->d_lock)->rlock
       hackbench-3588  [001]  1326.701664: lock_release: ffff88003f4091f0 &(&dentry->d_lock)->rlock
CPU:1 [LOST 673 EVENTS]
       hackbench-3588  [001]  1326.702711: kmem_cache_free: call_site=ffffffff81102b85 ptr=ffff880026d96738
       hackbench-3588  [001]  1326.702712: lock_release: ffff88003e1480a8 &mm->mmap_sem
       hackbench-3588  [001]  1326.702713: lock_acquire: ffff88003e1480a8 &mm->mmap_sem

Even works with the function graph tracer:

 2) ! 170.098 us  |                                            }
 2)   4.036 us    |                                            rcu_irq_exit();
 2)   3.657 us    |                                            idle_cpu();
 2) ! 190.301 us  |                                          }
CPU:2 [LOST 2196 EVENTS]
 2)   0.853 us    |                            } /* cancel_dirty_page */
 2)               |                            remove_from_page_cache() {
 2)   1.578 us    |                              _raw_spin_lock_irq();
 2)               |                              __remove_from_page_cache() {

Note, it does not work with the iterator "trace" file, since it requires
the use of consuming the page from the ring buffer to determine how many
events were lost, which the iterator does not do.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, when the ring buffer drops events, it does not record
the fact that it did so. It does inform the writer that the event
was dropped by returning a NULL event, but it does not put in any
place holder where the event was dropped.

This is not a trivial thing to add because the ring buffer mostly
runs in overwrite (flight recorder) mode. That is, when the ring
buffer is full, new data will overwrite old data.

In a produce/consumer mode, where new data is simply dropped when
the ring buffer is full, it is trivial to add the placeholder
for dropped events. When there's more room to write new data, then
a special event can be added to notify the reader about the dropped
events.

But in overwrite mode, any new write can overwrite events. A place
holder can not be inserted into the ring buffer since there never
may be room. A reader could also come in at anytime and miss the
placeholder.

Luckily, the way the ring buffer works, the read side can find out
if events were lost or not, and how many events. Everytime a write
takes place, if it overwrites the header page (the next read) it
updates a "overrun" variable that keeps track of the number of
lost events. When a reader swaps out a page from the ring buffer,
it can record this number, perfom the swap, and then check to
see if the number changed, and take the diff if it has, which would be
the number of events dropped. This can be stored by the reader
and returned to callers of the reader.

Since the reader page swap will fail if the writer moved the head
page since the time the reader page set up the swap, this gives room
to record the overruns without worrying about races. If the reader
sets up the pages, records the overrun, than performs the swap,
if the swap succeeds, then the overrun variable has not been
updated since the setup before the swap.

For binary readers of the ring buffer, a flag is set in the header
of each sub page (sub buffer) of the ring buffer. This flag is embedded
in the size field of the data on the sub buffer, in the 31st bit (the size
can be 32 or 64 bits depending on the architecture), but only 27
bits needs to be used for the actual size (less actually).

We could add a new field in the sub buffer header to also record the
number of events dropped since the last read, but this will change the
format of the binary ring buffer a bit too much. Perhaps this change can
be made if the information on the number of events dropped is considered
important enough.

Note, the notification of dropped events is only used by consuming reads
or peeking at the ring buffer. Iterating over the ring buffer does not
keep this information because the necessary data is only available when
a page swap is made, and the iterator does not swap out pages.

Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

In some error handling cases the lock is not unlocked.  The return is
converted to a goto, to share the unlock at the end of the function.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E1;
identifier f;
@@

f (...) { <+...
* spin_lock_irq (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.1003291736440.21896@ask.diku.dk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

# echo 1 > events/enable
 # echo global > trace_clock

------------[ cut here ]------------
WARNING: at kernel/lockdep.c:3162 check_flags+0xb2/0x190()
...
---[ end trace 3f86734a89416623 ]---
possible reason: unannotated irqs-on.
...

There's no reason to use the raw_local_irq_save() in trace_clock_global.
The local_irq_save() version is fine, and does not cause the bug in lockdep.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BA97FA1.7030606@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The ring buffer uses 4 byte alignment while recording events into the
buffer, even on 64bit machines. This saves space when there are lots
of events being recorded at 4 byte boundaries.

The ring buffer has a zero copy method to write into the buffer, with
the reserving of space and then committing it. This may cause problems
when writing an 8 byte word into a 4 byte alignment (not 8). For x86 and
PPC this is not an issue, but on some architectures this would cause an
out-of-alignment exception.

This patch uses CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to determine
if it is OK to use 4 byte alignments on 64 bit machines. If it is not,
it forces the ring buffer event header to be 8 bytes and not 4,
and will align the length of the data to be 8 byte aligned.
This keeps the data payload at 8 byte alignments and will allow these
machines to run without issue.

The trick to this is that the header can be either 4 bytes or 8 bytes
depending on the length of the data payload. The 4 byte header
has a length field that supports up to 112 bytes. If the length of
the data is more than 112, the length field is set to zero, and the actual
length is stored in the next 4 bytes after the header.

When CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set, the code forces
zero in the 4 byte header forcing the length to be stored in the 4 byte
array, even with a small data load. It also forces the length of the
data load to be 8 byte aligned. The combination of these two guarantee
that the data is always at 8 byte alignment.
Tested-by: NFrederic Weisbecker <fweisbec@gmail.com>
           (on sparc64)
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

perf_arch_fetch_caller_regs() is exported for the overriden x86
version, but not for the generic weak version.

As a general rule, weak functions should not have their symbol
exported in the same file they are defined.

So let's export it on trace_event_perf.c as it is used by trace
events only.

This fixes:

	ERROR: ".perf_arch_fetch_caller_regs" [fs/xfs/xfs.ko] undefined!
	ERROR: ".perf_arch_fetch_caller_regs" [arch/powerpc/platforms/cell/spufs/spufs.ko] undefined!

-v2: And also only build it if trace events are enabled.
-v3: Fix changelog mistake
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268697902-9518-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>