au8522_dig.o and au8522_decoder.o function independentantly
of each other, each for a different hardware function using
a different software subsystem api, each with its own set
of subsystem module dependencies.

Since these drivers do not depend on each other, and it is
in fact possible to build hardware designs using one function
and not the other, lets split this module into two, allowing
system integrators to enable the hardware without dragging in
undesired dependencies.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We don't use this any more after 3be5bb71 "[media] mxl111sf: fix error
on stream stop in mxl111sf_ep6_streaming_ctrl()" and it makes GCC
complain.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Seems like tuners used for frontend0 are not behind demodulator
I2C-gate thus gate control is not needed. Disable it for sure as
it can cause problems some situations.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add and rename "Afatech AF9035 reference design" as a first
device in the list since it sounds logical to keep reference
design IDs on top of the list.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Change function to use same logic than existing functions.
Debugs log writings are done in error case, earlier it was
just returning error code.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[crope@iki.fi: applied manually since erroneous patch]
Signed-off-by: NPierangelo Terzulli <pierigno@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Minor functionality and style changes.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement the get_frontend function.
The code is derived from the old af9033 driver by Antti Palosaari.
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

AF9035 code needed for IT9135 chip support. Needs still small
changes for AF9033 and totally new tuner driver in order to
get that chip version working.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use usleep_range() instead of msleep() to improve power saving opportunities.
Signed-off-by: NMichael Buesch <m@bues.ch>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There was a bug I2C adapter writes and reads one byte too much.
As the most I2C clients has auto-increment register addressing
this leads next register from the target register overwritten by
garbage data.

As a change remove whole register address byte usage and write
data directly to the I2C bus without saying what are register
address bytes to firmware.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: Michael Buesch <m@bues.ch>
Cc: Hans-Frieder Vogt <hfvogt@gmx.net>
Cc: Gianluca Gennari <gennarone@gmail.com>
Tested-by: NMichael Buesch <m@bues.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Let's save a few lines of code using the module_usb_driver macro.
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add basic support for the tda18218 tuner and the AVerMedia A835 devices.
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

New USB id for the Avermedia A867 stick (Sky Digital Key with blue led).
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support of AVerMedia AVerTV HD Volar, with tuner MxL5007t.
Signed-off-by: NHans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add some generic Afatech USB PIDs used by "Cabstone" sticks and others.
Signed-off-by: NMichael Buesch <m@bues.ch>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds Fitipower fc0011 tuner support to the af9035 driver.
Signed-off-by: NMichael Buesch <m@bues.ch>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On a 32 bit system:

af9035.c: In function 'af9035_download_firmware':
af9035.c:446:3: warning: format '%lu' expects argument of type 'long unsigned
int', but argument 3 has type 'unsigned int' [-Wformat]

%zu avoids any warning on both 32 and 64 bit systems.
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds USB message read checksumming to protect against
device and bus errors.
It also adds a read length check to avoid returning garbage from
the buffer, if the device truncated the message.
Signed-off-by: NMichael Buesch <m@bues.ch>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Enable i2c read requests.

I2C read fix (necessary e.g. for mxl5007t tuner, because it
sends a 2 bytes for a read request, thus msg[0].len != msg[1].len).
Signed-off-by: NHans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Supports currently only 12 MHz Xtals. It is better to print log
and not to attach frontend in that case.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Returns values as 0.1 dB resolution as preferred nowadays.
Actual resolution is 1 dB.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Big thanks to Daniel Glöckner <daniel-gl@gmx.net> for
revealing firmware structure on Linux Media mailing
list.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* do not attach frontend when tuner is not supported
* fix unkown tuner ID log write format
* add prefix for dvb-usb log writings
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

AF9035 is integrated DVB USB interface and DVB-T demodulator.
Integrated demodulator is AF9033 and its driver is attached
runtime as a own module.

Driver currently supports only one device,
TerraTec Cinergy T Stick [0ccd:0093].

TerraTec Cinergy T Stick is based of Afatech AF9035 +
Infineon TUA 9001 silicon tuner.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

has_get_frontend() should return a boolean, not a pointer.
Signed-off-by: NHans Petter Selasky <hselasky@c2i.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On some systems the device does not respond or give obscure values after cold,
warm or firmware reboot.

This patch retries to get chip version and type 5 times. If it
fails it applies chip version 0x1 and type 0x9135.

This patch does not fix warm cycle problems from other operating
systems and indeed the reverse applies. Users should power off cold boot.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The commit e399ce77 has broken the DVB ABI for xine:

The problem is that xine is expecting every event after a successful
FE_SET_FRONTEND ioctl to have a non-zero frequency parameter, regardless
of whether the tuning process has LOCKed yet. What used to happen is
that the events inherited the initial tuning parameters from the
FE_SET_FRONTEND call. However, the fepriv->parameters_out struct is now
not initialised until the status contains the FE_HAS_LOCK bit.

You might argue that this behaviour is intentional, except that if an
application other than xine uses the DVB adapter and manages to set the
parameters_out.frequency field to something other than zero, then xine
no longer has any problems until either the adapter is replugged or the
kernel modules reloaded. This can only mean that the
fepriv->parameters_out struct still contains the (stale) tuning
information from the previous application.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Cc: stable@kernel.org # for kernel version 3.3
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: NDavid Howells <dhowells@redhat.com>

stb0899: fix the limits for signal strength values

stb0899_read_signal_strength() adds an offset to the result of the table lookup.
That offset must correspond to the lowest value in the lookup table, to make sure
the result doesn't get below 0, which would mean a "very high" value since the
parameter is unsigned.
'strength' and 'snr' need to be initialized to 0 to make sure they have a
defined result in case there is no "internal->lock".
Signed-off-by: NKlaus Schmidinger <Klaus.Schmidinger@tvdr.de>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove unnecessary register access in mxl111sf_ep6_streaming_ctrl()

This code breaks driver operation in kernel 3.3 and later, although
it works properly in 3.2  Disable register access to 0x12 for now.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove incorrect SEC_MINI_B settings-TODO complete this section.

Correct break and remove return -EINVAL within set tone. It appears
there is a bug that occasionally something other than ON/OFF is
sent stalling the driver. Just continue and write back registers.

Set register b2 in setup. This is the set voltage pin which
isn't used in lmedm04 driver but it is always set to 0x1.

Correct the if statements in set_tuner_rf.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some changes for previous patch I liked to do.
Just move tuner init and sleep to own functions from the demod
init and sleep functions.  Functionality remains still almost the same.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The i2c failures were caused by enabling both i2c gates
at the same time while putting the tuners asleep.

This patch removes the init() and sleep() callbacks from the tuner,
to prevent frontend.c from calling
  i2c_gate_ctrl
  tuner init / sleep
  i2c_gate_ctrl
without holding the lock.
tuner init() and sleep() are instead called in frontend init() and
sleep().
Signed-off-by: NGordon Hecker <ghecker@gmx.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reported by kmemleak.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

struct dvb_usb_device *d can never be NULL so don't waste time
checking for this.

Rationale: the urb's context is set when usb_fill_bulk_urb() is called
in dib0700_rc_setup(), and never changes after that. d is dereferenced
unconditionally in dib0700_rc_setup() so it can't be NULL or the
driver would crash right away.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The au8522 driver programs the tuner after programming the demodulator,
but the tuner should be programmed first. This patch fixes this behavior.

EDIT: Apparantly Devin created a similar patch some time ago, but hasn't
submitted it for merge.  I never saw his patch, but I thank him anyhow
for his efforts.  In addition, Devin pointed out a flaw in my patch:

This newly generated patch takes Devin's comments into account.

Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>