Avoid the following INFO from lock debugging:

[  369.126112] =================================
[  369.132063] [ INFO: inconsistent lock state ]
[  369.136457] 2.6.28-maemo1 #1
[  369.139387] ---------------------------------
[  369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
[  369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  369.154890]  (&cdev->lock){+-..}, at: [<bf1979f0>] composite_disconnect+0x1c/0]
[  369.163404] {hardirq-on-W} state was registered at:
[  369.168348]   [<c00788a8>] __lock_acquire+0x5d0/0x7d8
[  369.173506]   [<c0078b14>] lock_acquire+0x64/0x78
[  369.178266]   [<c0263a34>] _spin_lock+0x4c/0x80
[  369.182905]   [<bf19597c>] usb_function_deactivate+0x20/0x70 [g_nokia]
[  369.189527]   [<bf1a0a88>] 0xbf1a0a88
[  369.193281]   [<bf19f450>] 0xbf19f450
[  369.197004]   [<bf19fa3c>] 0xbf19fa3c
[  369.200758]   [<bf1a03a0>] 0xbf1a03a0
[  369.204481]   [<bf19f254>] 0xbf19f254
[  369.208204]   [<bf1a0158>] 0xbf1a0158
[  369.211927]   [<bf1a130c>] 0xbf1a130c
[  369.215650]   [<c01c21f0>] usb_gadget_register_driver+0x12c/0x28c
[  369.221846]   [<bf1a06bc>] 0xbf1a06bc
[  369.225569]   [<bf1a06e8>] 0xbf1a06e8
[  369.229322]   [<c002c2dc>] __exception_text_end+0x64/0x19c
[  369.234877]   [<c0081628>] sys_init_module+0x9c/0x194
[  369.240004]   [<c002c8e0>] ret_fast_syscall+0x0/0x2c
[  369.245039]   [<ffffffff>] 0xffffffff
[  369.248793] irq event stamp: 218356
[  369.252302] hardirqs last  enabled at (218355): [<c003a77c>] omap3_enter_idle+8
[  369.260420] hardirqs last disabled at (218356): [<c0264774>] __irq_svc+0x34/0x0
[  369.267927] softirqs last  enabled at (218348): [<c00585a4>] __do_softirq+0x134
[  369.275892] softirqs last disabled at (218335): [<c005899c>] irq_exit+0x60/0xb0
[  369.283308]
[  369.283308] other info that might help us debug this:
[  369.289930] no locks held by swapper/0.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

To permit a userspace application to associate with WUSB devices
using numeric association, control transfers to unauthenticated WUSB
devices must be allowed.

This requires that wusbcore correctly sets the device state to
UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be
performed to UNAUTHENTICATED devices.
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them
from loading. Needs to be applied after Alan Stern's usb-storage
subdriver separation patchset. Also added missing MODULE_DESCRIPTION and
MODULE_AUTHOR entries.
Signed-off-by: NMaciej Grela <maciej.grela@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1217) converts usb-storage's onetouch subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1216) converts usb-storage's karma subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1215) converts usb-storage's alauda subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1214) converts usb-storage's jumpshot subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1213) converts usb-storage's datafab subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1212) converts usb-storage's freecom subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1211) converts usb-storage's shuttle_usbat subdriver
into a separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1210) converts usb-storage's cypress_atacb subdriver
into a separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1209) converts usb-storage's sddr55 subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1208) converts usb-storage's isd200 subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1207) converts usb-storage's sddr09 subdriver into a
separate module.

An unexpected complication arises because of DPCM devices, in which
one LUN uses the sddr09 transport and one uses the standard CB
transport.  Since these devices can be used even when
USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h
require special treatment.  If SDDR09 isn't configured then the
entries remain in unusual_devs.h; if it is then the entries are
present in unusual_sddr09.h instead.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1206) is the first step in converting usb-storage's
subdrivers into separate modules.  It makes the following large-scale
changes:

	Remove a bunch of unnecessary #ifdef's from usb_usual.h.
	Not truly necessary, but it does clean things up.

	Move the USB device-ID table (which is duplicated between
	libusual and usb-storage) into its own source file,
	usual-tables.c, and arrange for this to be linked with
	either libusual or usb-storage according to whether
	USB_LIBUSUAL is configured.

	Add to usual-tables.c a new usb_usual_ignore_device()
	function to detect whether a particular device needs to be
	managed by a subdriver and not by the standard handlers
	in usb-storage.

	Export a whole bunch of functions in usb-storage, renaming
	some of them because their names don't already begin with
	"usb_stor_".  These functions will be needed by the new
	subdriver modules.

	Split usb-storage's probe routine into two functions.
	The subdrivers will call the probe1 routine, then fill in
	their transport and protocol settings, and then call the
	probe2 routine.

	Take the default cases and error checking out of
	get_transport() and get_protocol(), which run during
	probe1, and instead put a check for invalid transport
	or protocol values into the probe2 function.

	Add a new probe routine to be used for standard devices,
	i.e., those that don't need a subdriver.  This new routine
	checks whether the device should be ignored (because it
	should be handled by ub or by a subdriver), and if not,
	calls the probe1 and probe2 functions.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With "nousb" cmdline booting, built-in serial drivers (ie. airecable)
will trigger kernel oops.

Indeed, if nousb, usb_serial_init will failed, and the usb serial bus type
will not be registerd, then usb_serial_register call driver_register
which try to register the driver to a not registered bus.

Here add usb_disabled() check in usb_serial_register to fix it.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix ehci printk formats:

drivers/usb/host/ehci-q.c:351: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
drivers/usb/host/ehci-q.c:351: warning: format '%d' expects type 'int', but argument 5 has type 'size_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The base versions handle constant folding now.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver originally written by Qualcomm, but rewritten by me due to the
totally different coding style.  Cleaned up the probe logic to make a
bit more sense, this is one wierd device.  They could have prevented all
of this by just writing sane firmware for the modem.

Cc: Tamm Liu <tamml@qualcomm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to figure out what userspace programs are expecting from this
driver, so log them so we can try to get it right.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is for the Symbol 6608 barcode scanner in a fake "HID" mode.

Thanks to Dalibor Grgec for working with me to get this to start to work
properly.

Cc: Dalibor Grgec <dalibor.grgec@zemris.fer.hr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, the driver only supports PCI and PPC_OF but there are
boards like ARM RealView where this is a platform device. The patch adds
the necessary functions and registration to the isp1760-if.c file and
modifies the corresponding Makefile and Kconfig to be able to use this
driver even if PCI and PPC_OF are not enabled.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch changes the prototype of the isp1760_register() function to use
predefined types like phys_addr_t and resource_size_t rather than u64
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1204) adds a software retry mechanism to ehci-hcd.  It
gets invoked when the driver encounters transaction errors on an
asynchronous endpoint.  On many systems, hardware deficiencies cause
such errors to occur if one device is unplugged while the host is
communicating with another device.  With the patch, the failed
transactions are retried and generally succeed the second or third
time through.

This is based on code originally written by Koichiro Saito.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested by: Koichiro Saito <Saito.Koichiro@adniss.jp>
CC: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

commit 64a87b24: [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
changed the scsi_eh_prep_cmnd logic by making it clear
the ->cmnd buffer. But the sat to cypress atacb translation supposed
the ->cmnd buffer wasn't modified.

This patch makes it set the ->cmnd buffer after scsi_eh_prep_cmnd call.
The problem and a fix was reported by Matthieu CASTET <castet.matthieu@free.fr>

It also removes all the hackery fiddling of scsi_cmnd and scsi_eh_save by
requesting from scsi_eh_prep_cmnd to prepare a read into ->sense_buffer,
which is much more suitable a buffer for HW transfers, then after the command
execution the regs read is copied into regs buffer before actual preparation
of sense_buffer.

Also fix an alien comment character to my utf-8 editor.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Cc: stable <stable@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Dharm <mdharm-kernel@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1205) moves timer_action() from ehci.h to ehci-hcd.c and
makes it out-of-line.  Over the years it has grown too big to be inline
any more.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove old comments about USB_EHCI_HCD.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A USB-serial converter device is plugged into a system, and a process
opens it's device node.  If the device is physically removed whilst the
process still has its device node open, then other processes can
sucessfully open the now non-existent device's node.  I would expect
that open() on a device that has been physically removed should return
ENODEV.

This is manifesting itself with getty on my system.  I do the following:
1.  set up inittab to spawn getty on ttyUSB0, eg:
    T1:23:respawn:/sbin/getty -L ttyUSB0 115200 vt100
2.  Plug in USB-serial converter cable
3.  Wait for a login prompt on a terminal program attached to the serial
    cable
4.  Login
5.  Pull the USB-serial converter cable from the box
6.  getty doesn't realise that ttyUSB0 no longer exists as /dev/ttyUSB0
    can still be opened.
7.  Re-insert the USB-serial converter cable
8.  You should no longer get a login prompt over the serial cable, as
    the the USB-serial cable now shows up as /dev/ttyUSB1, and getty is
    trying to talk to /dev/ttyUSB0.

The attached patch will cause open("/dev/ttyUSB0", O_RDONLY) to return
ENODEV after the USB-serial converter has been pulled.  The patch was
created against 2.6.28.1.  I can supply it against something else if
needs be.  It is fairly simple, so should be OK.

I am using a pl2303 device, although I don't think that makes any
difference.


From: James Woodcock <James.Woodcock@ACULAB.COM>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes the fallback to the generic method. It is cleaner to
explicitely request it. Introducing this was my mistake. This will
be solved by an explicit test and the driver being allowed to request
what it needs to be done upon resumption.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

338b67b0 removed the info macro and
replaced its uses with dev_info.  This patch does so for
usb-skeleton.c, which was missed.
Signed-off-by: NMatt Kraai <kraai@ftbfs.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make lines about usb_storage depending on SCSI visible when configuring the
kernel in a 80x25 console
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This lets userspace determine what the state of the RTS line is, which
is what is needed to properly handle data flow for this device (it
raises RTS when there is data to be sent from it.)

Cc: Kees Stoop <kees.stoop@opticon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch allows data to be sent to the scanner.

Cc: Kees Stoop <kees.stoop@opticon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

NOP transceiver is used by all the usb transceiver which are mostly
autonomous and doesn't require any programming or which are built
into the usb ip itself.NOP transceiver only allocates the memory
for struct xceiv and calls otg_set_transceiver() so function call
to otg_get_transceiver() will return a valid transceiver.

NOP transceiver device should be registered by calling
usb_nop_xceiv_register() from platform files.
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove some pointless messages from the FTDI serial driver;
I found these filling up syslog on one system.  Also remove
a pointless "break" after a "return" in the same area.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

According to kerneljanitors todo list all printk calls (beginning
a new line) should have an according KERN_* constant.
Those are the missing peaces here for the usb subsystem.
Signed-off-by: NFrank Seidel <frank@f-seidel.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes use of the generic method if a serial driver provides
no implementation. This simplifies implementing suspend/resume support
in serial drivers.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This exports a symbol for usb_serial_generic_resume, so that modules can
use it.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes an unnecessary check for autoresume from the generic
resume method. The check has been obsoleted by the now delayed
increase of the usage counter which makes the error this check prevented
impossible. This change allows drivers which only use the bulk read URB
the use of the generic method even if they support autosuspend.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB: serial: introduce a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension

This patch introduces a flag into the usb serial layer to tell drivers
that their URBs are killed due to suspension. That is necessary to let
drivers know whether they should report an error back.
Signed-off-by: NOliver Neukum <oneukum@suse.de>

Hi Greg,

this is for 2.6.30. Patches to use this in drivers are under development.

	Regards
		Oliver