- 14 6月, 2006 3 次提交
-
-
由 Bob Moore 提交于
Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Implemented the use of a cache object for all internal namespace nodes. Since there are about 1000 static nodes in a typical system, this will decrease memory use for cache implementations that minimize per-allocation overhead (such as a slab allocator.) Removed the reference count mechanism for internal namespace nodes, since it was deemed unnecessary. This reduces the size of each namespace node by about 5%-10% on all platforms. Nodes are now 20 bytes for the 32-bit case, and 32 bytes for the 64-bit case. Optimized several internal data structures to reduce object size on 64-bit platforms by packing data within the 64-bit alignment. This includes the frequently used ACPI_OPERAND_OBJECT, of which there can be ~1000 static instances corresponding to the namespace objects. Added two new strings for the predefined _OSI method: "Windows 2001.1 SP1" and "Windows 2006". Split the allocation tracking mechanism out to a separate file, from utalloc.c to uttrack.c. This mechanism appears to be only useful for application-level code. Kernels may wish to not include uttrack.c in distributions. Removed all remnants of the obsolete ACPI_REPORT_* macros and the associated code. (These macros have been replaced by the ACPI_ERROR and ACPI_WARNING macros.) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 02 4月, 2006 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 01 4月, 2006 3 次提交
-
-
由 Len Brown 提交于
acpi_os_get_thread_id() is used only for debugging code that is not enabled on Linux, so stub it out. Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Tagged all external interfaces to the subsystem with the new ACPI_EXPORT_SYMBOL macro. This macro can be defined as necessary to assist kernel integration. For Linux, the macro resolves to the EXPORT_SYMBOL macro. The default definition is NULL. Added the ACPI_THREAD_ID type for the return value from acpi_os_get_thread_id(). This allows the host to define this as necessary to simplify kernel integration. The default definition is ACPI_NATIVE_UINT. Valery Podrezov fixed two interpreter problems related to error processing, the deletion of objects, and placing invalid pointers onto the internal operator result stack. http://bugzilla.kernel.org/show_bug.cgi?id=6028 http://bugzilla.kernel.org/show_bug.cgi?id=6151 Increased the reference count threshold where a warning is emitted for large reference counts in order to eliminate unnecessary warnings on systems with large namespaces (especially 64-bit.) Increased the value from 0x400 to 0x800. Due to universal disagreement as to the meaning of the 'c' in the calloc() function, the ACPI_MEM_CALLOCATE macro has been renamed to ACPI_ALLOCATE_ZEROED so that the purpose of the interface is 'clear'. ACPI_MEM_ALLOCATE and ACPI_MEM_FREE are renamed to ACPI_ALLOCATE and ACPI_FREE. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Implemented a change to the IndexField support to match the behavior of the Microsoft AML interpreter. The value written to the Index register is now a byte offset, no longer an index based upon the width of the Data register. This should fix IndexField problems seen on some machines where the Data register is not exactly one byte wide. The ACPI specification will be clarified on this point. Fixed a problem where several resource descriptor types could overrun the internal descriptor buffer due to size miscalculation: VendorShort, VendorLong, and Interrupt. This was noticed on IA64 machines, but could affect all platforms. Fixed a problem where individual resource descriptors were misaligned within the internal buffer, causing alignment faults on IA64 platforms. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 31 3月, 2006 7 次提交
-
-
由 Bob Moore 提交于
Removed a couple of extraneous ACPI_ERROR messages that appeared during normal execution. These became apparent after the conversion from ACPI_DEBUG_PRINT. Fixed a problem where the CreateField operator could hang if the BitIndex or NumBits parameter referred to a named object. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5359 Fixed a problem where a DeRefOf operation on a buffer object incorrectly failed with an exception. This also fixes a couple of related RefOf and DeRefOf issues. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5360 http://bugzilla.kernel.org/show_bug.cgi?id=5387 http://bugzilla.kernel.org/show_bug.cgi?id=5392 Fixed a problem where the AE_BUFFER_LIMIT exception was returned instead of AE_STRING_LIMIT on an out-of-bounds Index() operation. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5480 Implemented a memory cleanup at the end of the execution of each iteration of an AML While() loop, preventing the accumulation of outstanding objects. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5427 Eliminated a chunk of duplicate code in the object resolution code. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5336 Fixed several warnings during the 64-bit code generation. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Kyle McMartin 提交于
On Thu, Mar 30, 2006 at 08:31:02AM -0500, Dmitry Torokhov wrote: > Don't do that, its double free. input_unregister_device() normally > causes release() to be called and free the device. input_free_device > is only to be called when input_register_device has not been called or > failed. > > Plus you might want to unregister device after closing serio port, > otherwise your interrupt routine might be referencing already freed > memory. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Convert HIL drivers to use input_allocate_device() - avoids crashes. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Kill various warnings when built using ioremap. Remove stifb_{read,write} functions, which are now obsolete (and stack abusers!) Disable stifb mmap() functionality on a 64-bit kernel, it will crash the machine. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Addresses in F-space must be accessed uncached on most parisc machines. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Thibaut VARENE 提交于
pdc_stable.c is explicitly licensed under GPL version 2. Signed-off-by: NThibaut VARENE <varenet@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 30 3月, 2006 26 次提交
-
-
由 Hal Rosenstock 提交于
Add RMPP support for additional management classes that support it. Also, validate RMPP is consistent with management class specified. Signed-off-by: NHal Rosenstock <halr@voltaire.com> Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
Received responses are currently matched against sent requests based on TID only. According to the spec, responses should match based on the combination of TID, management class, and requester LID/GID. Without the additional qualification, an agent that is responding to two requests, both of which have the same TID, can match RMPP ACKs with the incorrect transaction. This problem can occur on the SM node when responding to SA queries. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Mark Lord 提交于
(1) A DMA transfer size of 0x10000 was not being written as 0x0000 in the PRDs. Fixed. (1) The DEV_IRQ interrupt cause bit happens spuriously during EDMA operation, and was not being ignored by the driver. This led to various "drive busy" errors being reported, with associated unpredictable behaviour. Fixed. (2) If a SATA or PCI interrupt was received with no outstanding command, the interrupt handler still attempted to invoke ata_qc_complete(), triggering assert()/BUG_ON() behaviour elsewhere in libata. Fixed. The driver still has issues with confusion after error-recovery, but should now be reliable in the absence of drive errors. I will be looking more into the error-handling bugs next. Signed-Off-By: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Albert Lee 提交于
ata_dev_init_params() fixes: - Get the "heads" and "sectors" parameters from caller instead of implicitly from dev->id[]. - Return AC_ERR_INVALID instead of 0 if an invalid parameter is found Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Last of the set, just clean up some oddments. Assuming the whole set is now ok then the remaining differences are the setup of PIO_0 at reset and the ->data_xfer method. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
I think this is still needed with the new probe code (which btw seems to be missing docs in upstream ?). Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Some hardware doesn't want the usual mode setup logic running. This allows the hardware driver to replace it for special cases in the least invasive way possible. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
This is the minimal patch set to enable the current code to be used with a controller following SFF (ie any PATA and early SATA controllers) safely without crashes if there is no BMDMA area or if BMDMA is not assigned by the BIOS for some reason. Simplex status is recorded but not acted upon in this change, this isn't a problem with the current drivers as none of them are for simplex hardware. A following diff will deal with that. The flags in the probe structure remain ->host_set_flags although Jeff asked me to rename them, simply because the rename would break the usual Linux rules that old code should break when there are changes. not compile and run and then blow up/eat your computer/etc. Renaming this later is a trivial exercise once a better name is chosen. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Lennert Buytenhek 提交于
gcc4 doesn't like us declaring a static function inside another function. We can do away with this construct altogether and use BUILD_BUG_ON() instead (idea from Andi Kleen.) Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Added code to check for invalid MAC address from eeprom or user input. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
The comments concerning how the pcnet32 ethernet device driver selects the MAC addr to use are incorrect. A recent patch (in the last 3 months) changed how the code worked, but did not change the comments. Side comment: the new behaviour is good; I've got a pcnet32 card which powers up with garbage in the CSR's, and a good MAC addr in the PROM. Signed-off-by: NLinas Vepstas <linas@linas.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Arthur Othieno 提交于
Don't bother testing for CONFIG_NET_CBUS ("NEC PC-9800 C-bus cards"); it went out with the rest of PC98 subarch. Signed-off-by: NArthur Othieno <apgo@patchbomb.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Brown 提交于
The natsemi chip can have a larger EEPROM attached than it itself uses for configuration. This patch adds support for user space access to such an EEPROM. Signed-off-by: NMark Brown <broonie@sirena.org.uk> Cc: Tim Hockin <thockin@hockin.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jens Osterkamp 提交于
This enables TX checksum offloading for the spidernet driver by default. Signed-off-by: NJens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
Fix section mismatches in acenic driver: WARNING: drivers/net/acenic.o - Section mismatch: reference to .init.data:tigon2FwText from .text between 'acenic_probe_one' (at offset 0x2409) and 'ace_interrupt' WARNING: drivers/net/acenic.o - Section mismatch: reference to .init.data:tigon2FwRodata from .text between 'acenic_probe_one' (at offset 0x2422) and 'ace_interrupt' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jens Osterkamp 提交于
This patch reduces the message level of the RX ram full messages from err to debug to prevent spamming the console leaving it in the logfiles though. From: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Roger Luethi 提交于
Problems with link state detection have been reported several times in the past months. Denis Vlasenko did all the work tracking it down. Jeff Garzik suggested the proper place for the fix. When using the mii library, the driver needs to check mii->force_media and set dev->state accordingly. Signed-off-by: NRoger Luethi <rl@hellgate.ch> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Komuro 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Kill trailing whitespace. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Initializing the b44 MAC & PCI functional blocks in the controller must occur inside init_one(). This will allow access to the MAC registers. The controller was being powered up in b44_open() which would not allow access to the registers before ifconfig was up. Philip Kohlbecher found this bug. Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
-
由 Roland Dreier 提交于
Quite a few cleanup functions in mthca were marked as __devexit. However, they could also be called from error paths during initialization, so they cannot be marked that way. Just delete all of the incorrect annotations. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
ipoib_hard_header() needs to handle the case that daddr is NULL. This can happen when packets are injected via a raw socket, and IPoIB shouldn't oops in this case. Reported by Anton Blanchard <anton@samba.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
The previous patch for Tavor broke MemFree logic. The driver should perform limit check only for Tavor. For MemFree, the check is incorrect, since ds (WQE stride) is always a power-of-2 (although the max_desc_size may not be). In Tavor, however, WQE stride and desc_size are the same, and are not necessarily power-of-2. The check was really for the WQE stride (and it Tavor, we use max_desc_size for the stride). Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The recently merged patch to create a fake scatterlist for non-SG SCSI commands had a bug: the driver ended up doing dma_unmap_sg() on a scatterlist scmnd->request_buffer rather than the fake scatter list it created. Fix this so that the driver unmaps the same thing it maps. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-