When we attempt the reset the GPU, look at the status registers
to determine what blocks need to be reset.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the code to better match the recommended
programming sequence for soft reset.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used by all asic families from r600+.
Flag for the vbios and later instances of the driver
that the GPU is hung.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes GPU hang during DMA ring IB test.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59672Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes a hard lock in the gpu reset code after the
rework for DMA support (0ecebb9e
"drm/radeon: switch to a finer grained reset for evergreen")
due to not bailing before the MC shutdown if the relevant engines
are idle.

Discussion:
http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.htmlReported-by: NEldad Zack <eldad@fogrefinery.com>
Tested-by: NEldad Zack <eldad@fogrefinery.com>
Acked-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No change in functionality as we currently set all the reset
flags.
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This try to reset the dma engine when performing gpu reset. Hopefully
bringing back the gpu dma engine in sane state.

v2: agd5f: fix dma reset on cayman/TN, add support for SI
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To help debug dma related lockup.

v2: agd5f: update SI as well
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Async DMA has a special packet for contiguous pt updates
which saves overhead.

v2: leave the CP method enabled for now as doing the updates
in the DMA rings is not working properly yet.

v3: update for 2 level pts

v4: rebase

v5: drop pte/pde packet.  doesn't seem to work on NI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are 2 async DMA engines on cayman, one at 0xd000 and
one at 0xd800.  The programming interface is the same as
evergreen however there are some changes to the commands
for using vmids.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Redirect invalid memory accesses to the default page
instead of locking up the memory controller. Also
enable the invalid memory access interrupts and
start spamming system log with it.

v2 (agd5f): fix up against 2 level PT changes
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.
Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Handle requests that won't fit into a single packet.

v2: pe needs to increase as well.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise the next IB might start reading commands
with the page table still invalid.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to emit them at VM flush as we no longer use
variable sized page tables now that we support 2 level
page tables.  This matches the behavior of SI (which
does not support variable sized page tables).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Based on Dmitries work, but splitting the code into page
directory and page table handling makes it far more
readable and (hopefully) more reliable.

Allocations of page tables are made from the SA on demand,
that should still work fine since all page tables are of
the same size.

Also using the fact that allocations from the SA are mostly
continuously (except for end of buffer wraps and under very
high memory pressure) to group updates send to the chipset
specific code into larger chunks.

v3: mostly a rewrite of Dmitries previous patch.
v4: fix some typos and coding style
Signed-off-by: NDmitry Cherkasov <Dmitrii.Cherkasov@amd.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The actual set up and assignment of VM page tables
is done on the fly in radeon_gart.c.

v2: update vm size comments
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Pass the vm and ring index rather than an IB.  This allows
us to use the vm_flush interface for non-IB cases in the
future.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

PDE/PTE update code uses CP ring for memory writes.
All page table entries are preallocated for now in alloc_pt().

It is made as whole because it's hard to divide it to several patches
that compile and doesn't break anything being applied separately.

Tested on cayman card.

v2: rebased on top of "refactor set_page chipset interface v3",
    code cleanups

v3: switched offsets calc macros to inline funcs where possible,
    remove pd_addr from radeon_vm, switched RADEON_BLOCK_SIZE define,
    to 9 (and PTE_COUNT to 1 << BLOCK_SIZE)

v4 (ck): move "incr" documentation to previous patch, cleanup and
         document RADEON_VM_* constants, change commit message to
         our usual format, simplify patch allot by removing
         everything current not necessary, disable SI workaround.

v5: (agd5f): Fix typo in tables_size calculation in
             radeon_vm_alloc_pt().  Second line should have been
             '+=' rather than '='.

v6: fix npdes calculation. In scenario when pfns to be mapped overlap
two PDE spans:

   +-----------+-------------+
   | PDE span  | PDE span    |
   +-----------+----+--------+
          |         |
          +---------+
          | pfns    |
          +---------+

the following npdes calculation gives incorrect result:

npdes = (nptes >> RADEON_VM_BLOCK_SIZE) + 1;

For the case above picture it should give npdes = 2, but gives one.

This patch corrects it by rounding last pfn up to 512 border,
first - down to 512 border and then subtracting and dividing by 512.

v7: Make npde calculation clearer, fix ndw calculation.

v8: (agd5f): reserve enough for 2 full VM PTs, add some
             additional comments.

v9: fix typo in npde calculation
Signed-off-by: NDmitry Cherkasov <Dmitrii.Cherkasov@amd.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup the interface in preparation for hierarchical page tables.

v2: add incr parameter to set_page for simple scattered PTs uptates
    added PDE-specific flags to r600_flags and radeon_drm.h
    removed superfluous value masking with 0xffffffff

v3: removed superfluous bo_va->valid checking
    changed R600_PTE_VALID to R600_ENTRY_VALID to handle PDE too

v4 (ck): fix indention style, rework and fix typos in commit message,
         add documentation for incr parameter, also use incr
         parameter for system pages

v5 (agd5f): use upper_32_bits() and minor white space fixes
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDmitry Cherkassov <Dmitrii.Cherkasov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Let's allow GCC to optimize better.

This exposed some five unused functions, but this patch doesn't remove them.
Signed-off-by: NLauri Kasanen <cand@gmx.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently doing the update with the CP.

v2: Rebased on Jeromes bugfix. Make validity comparison
    more human readable.
Signed-off-by: NChristian König <deathsimple@vodafone.de>

Makes it easier to move it into the rings.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Move binding onto the ring, simplifying handling a bit.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Move flushing the VMs as function into the rings.
First step to make VM operations async.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

It actually isn't very useful.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Store a reference to the VM into the IB structure, that
makes calculating the IBs address a bit less complicated.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Handle the 16 bank case.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Print various CP register that have valuable informations regarding
GPU lockup.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Before emitting any indirect buffer, emit the offset of the next
valid ring content if any. This allow code that want to resume
ring to resume ring right after ib that caused GPU lockup.

v2: use scratch registers instead of storing it into memory
v3: skip over the surface sync for ni and si as well
v4: use SET_CONFIG_REG instead of PACKET0
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Making it easier to control when it is executed.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Just restore the page table instead. Addressing three
problem with this change:

1. Calling vm_manager_suspend in the suspend path is
   problematic cause it wants to wait for the VM use
   to end, which in case of a lockup never happens.

2. In case of a locked up memory controller
   unbinding the VM seems to make it even more
   unstable, creating an unrecoverable lockup
   in the end.

3. If we want to backup/restore the leftover ring
   content we must not unbind VMs in between.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Just reinitialize the shader content on resume instead.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The IB pool is in gart memory, so it is completely
superfluous to unpin / repin it on suspend / resume.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

It's not critical, but the current code isn't
100% correct.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

For a normal suspend/resume we allready wait for
the rings to be empty, and for a suspend/reasume
in case of a lockup we REALLY don't want to wait
for anything.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

It is completely unnecessary to create fences
before they are emitted, so remove it and a bunch
of checks if fences are emitted or not.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

After recent changes HDMI code is ready to be enabled on DCE5. This
patch just changes conditions to execute already present code on DCE5.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NChristian König <christian.koenig@amd.com>
Tested-by: NAndre Heider <a.heider@gmail.com>
Tested-by: NZoltán Böszörményi <zboszor@pr.hu>
Signed-off-by: NDave Airlie <airlied@redhat.com>