- 31 10月, 2011 1 次提交
-
-
由 Vinod Koul 提交于
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves spi, serial drivers to use new enum Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Acked-by: NMika Westerberg <mika.westerberg@iki.fi>
-
- 29 10月, 2011 2 次提交
-
-
由 Tomoya MORINAGA 提交于
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Tomoya MORINAGA 提交于
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 05 10月, 2011 5 次提交
-
-
由 Tomoya MORINAGA 提交于
We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Tomoya MORINAGA 提交于
Add recovery processing in case FIFO overrun error occurs with DMA transfer mode. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Tomoya MORINAGA 提交于
We found Rx data sometimes drops.(with non-DMA transfer mode) The cause is read complete condition is not true. This patch fixes the issue. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Tomoya MORINAGA 提交于
During processing 1 command/data series, SSN should keep LOW. However, currently, SSN becomes HIGH. This patch fixes the issue. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Tomoya MORINAGA 提交于
Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 17 6月, 2011 1 次提交
-
-
由 Tomoya MORINAGA 提交于
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 09 6月, 2011 2 次提交
-
-
由 Tomoya MORINAGA 提交于
This patch enables this SPI driver works with DMA mode. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Tomoya MORINAGA 提交于
Support ML7213 device of OKI SEMICONDUCTOR. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is compatible for Intel EG20T PCH. v4: - Delete unrelated whitespace - Prevent device driver from accessing platform data - Add __devinit and __devexit - Save pdev->dev to pd_dev->dev.parent - Have own suspend/resume processing in platform_driver. - Care returned value in pch_spi_init - Change unregister order Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 06 6月, 2011 1 次提交
-
-
由 Grant Likely 提交于
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 01 1月, 2011 1 次提交
-
-
由 Justin P. Mattock 提交于
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 24 12月, 2010 1 次提交
-
-
由 Tomoya MORINAGA 提交于
It seems spi_topcliff_pch of linux-2.6.37-rc6 degraded by previous patch. In fact, data transfer fails on evaluation board testing. I found like the following register miss-setting line. Using this patch, I have confirmed data transfer can work well. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 14 10月, 2010 1 次提交
-
-
由 Grant Likely 提交于
This patch fixes the following build error introduced by commit 65308c46, "spi/topcliff: cleanup for style and conciseness". drivers/spi/spi_topcliff_pch.c: In function 'pch_spi_process_messages': drivers/spi/spi_topcliff_pch.c:752: warning: 'data' is used uninitialized in +this function Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 13 10月, 2010 1 次提交
-
-
由 Grant Likely 提交于
This patch makes multiple cleanups to the new topcliff pch spi driver including, but not limited to, - removing superfluous brackets around variables - open coding functions that are only used once - removing unnecessary line breaks - removing unused functions - simplifying the interrupt enable/disable code - remove unnecessary (void *) casts. - remove b_mem_fail from pch_spi_set_tx to code it more cleanly - shorten dev_dbg() messages for conciseness and readability More cleanups are still needed in this driver. In particular, - the driver filename should be changed to spi_topcliff_pch.c - many of the dev_dbg() lines should be trimmed (particularly the ones on unconditional code paths). - I suspect that the locking model not correct. I'd like to know what drivers' critical regions are, and how they are protected. - get_resources and release_resources probably should be open coded in .probe and .release respectively. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 09 10月, 2010 1 次提交
-
-
由 Masayuki Ohtake 提交于
Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. This patch adds a driver for the SPI bus integrated into the Topcliff device. Signed-off-by: NMasayuki Ohtake <masa-korg@dsn.okisemi.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-