The adapter queue is divided up equally to all the arrays to prevent
command starvation to any individual array. On the other hand,
physical targets are only granted a queue depth of one each. The code
prior to this patch used to deal with the incremental discovery of
targets, but the driver knows how many arrays are present prior to the
scan so this knowledge is used to generate a better estimate for the
queue depth.

Remove the capability of 'physical=0' from preventing access to the
class of adapters that have the RAID/SCSI mode of operation since none
of the physicals on the SCSI channel are candidates ever for an array.

As always, the user can override this default queue depth policy by
making the appropriate adjustments utilizing sysfs.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

In experiments in the lab we managed to trigger an Adapter firmware
panic (BlinkLED) coincidentally while several pass-through ioctl
command from the management software were outstanding on a bug only
present on a class of RAID Adapters that require a hardware reset
rather than a commanded reset. The net result was an attempt to time
out the management software command as if it came from the SCSI layer
resulting in an OS panic.

Adapters that use commanded reset, management commands are returned
failed by the Adapter correctly. The adapter firmware panic that
resulted in this condition was also resolved, and there were no
adapters in the field with this specific firmware bug so we do not
expect any field reports. This is a rare or unlikely corner condition,
and no reports have ever been forwarded from the field.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The 'entry' automatic variable was defined at the top and within a
block that uses it, removed the definition from the block that uses
it. Some cosmetic changes were made while in the same file. This patch
should be inert.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Big endian systems issues discovered in the aacraid driver. Somewhat
reverses a patch from November 7th of last year that removed swap
operations because they formerly were being assigned to an u8 array
when they should have been assigned to an le32 array.

This patch is largely inert for any little endian processor
architecture. It resolves a bug in delivering the BlinkLED AIF event
to registered applications when the adapter or associated hardware was
reset due to ill health. A rare corner case occurrence, also largely
unnoticed by any as it was a new (untested!) feature.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The parameter 'info' is reused, renamed the second to sinfo to
represent supplemental adapter info, to suppress compile warning
message.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Report the RAID level string for the SCSI device representing the
array. Report is in /sys/class/scsi_device/#:#:#:#/device/level.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

aacraid.cache parameter, Disable Queue Flush commands:
        bit 0 - Disable FUA in WRITE SCSI commands
        bit 1 - Disable SYNCHRONIZE_CACHE SCSI command
        bit 2 - Disable only if Battery not protecting adapter supplied Cache

e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE
commands if the adapter has reported that it's cache is battery backed
up.

This parameter permits experimentation with tradeoffs between
performance and caching policy.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This conversion makes full use of the is_visible() callback on attribute
groups.  Now, each device appears only with its capability flags in the
transport class directory.  Previously each device appeared with the
capability of the host, so this is a functionality improvement.
Converting to attribute groups allows us to sweep away most of the home
grown #defines that were effectively doing the same thing.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

While trying to convert the SPI transport class to attribute groups, I
discovered that we don't actually have any transport configure points
for either the target or the host.  This patch adds these missing
transport class triggers.  The host one is simply done after the add,
the target one tries to be more clever and add it after devices may have
been placed on the target (so the device configure will have set up the
target parameters).
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This patch relaxes the default SCSI DMA alignment from 512 bytes to 4
bytes.  I remember from previous discussions that usb and firewire have
sector size alignment requirements, so I upped their alignments in the
respective slave allocs.

The reason for doing this is so that we don't get such a huge amount of
copy overhead in bio_copy_user() for udev.  (basically all inquiries it
issues can now be directly mapped).
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Looks like that host_cmd_pool_mutex are necessary here.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Based on an original patch from: David Martin <tasio@tasio.net>

When trying to get the drive status via ioctl CDROM_DRIVE_STATUS, with
no disk it gives CDS_TRAY_OPEN even if the tray is closed.

ioctl works as expected with ide-cd driver.

Gentoo bug report: http://bugs.gentoo.org/show_bug.cgi?id=196879

Cc: Maarten Bressers <mbres@gentoo.org>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This is bad for two reasons:

     1. If they're returned to outside applications, no-one knows what
        they mean.
     2. Eventually they'll clash with the ever expanding standard error
        codes.

The problem error code in question is ETASK.  I've replaced this by
ECOMM (communications error on send) a network error code that seems to
most closely relay what ETASK meant.
Acked-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Currently in BSG, errors returned in req->errors aren't passed back to
the calling programme (either via SG_IO or via read/write).  Fix this,
while preserving the SCSI convention of returning status in
req->errors.

Now update libsas to return errors correctly instead of to ignore
them.
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

All SMP tasks sent through bsg generate messages like:

sas: smp_execute_task: task to dev 500605b000001450 response: 0x0 status 0x81

Three times (because the task gets retried).  Firstly, don't retry
either overrun or underrun (the data buffer isn't going to change size)
and secondly, just report the underrun but don't set an error for it.
This is necessary so bsg can report back the residual.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This adds support for host side SMP processing, via a separate
SMP interpreter file.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

megaraid_remove_one() can become __devexit.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: N"Patro, Sumant" <Sumant.Patro@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

SR_REQ is defined 0x20, but bitanding has no effect because '!' has a higher
priority than '&'
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Update version.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If we negotiate for X r2ts we have to use only X r2ts. We cannot
round up (we could send less though). It is ok to fail if it
is not something the driver can handle, so this patch just does
that.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)
Signed-off-by: Nvignesh babu <vignesh.babu@wipro.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

iscsi_data_rsp needs to hold the sesison lock when it calls
iscsi_update_cmdsn.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The previous patches converted iscsi_tcp to support sg chaining.
This patch sets the proper flags and sets sg_table size to
4096. This allows fs io to be capped at max_sectors, but passthrough
IO to be limited by some other part of the kernel.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Older tools will not be setting the tmf time outs since they
did not exists, so set them to a safe default.

And export abort and lu reset timeout values in sysfs.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

A target should never send us a itt that does not match a running
task. If it does we do not really know what is coming down after the header,
unless we evaluate the hdr and do some guessing sometimes. However,
even if we know what is coming we probably do not have buffers for it or we
cannot respond (if it is a r2t for example), so just drop the session.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

iscsi_r2t_rsp checks the incoming R2T for sanity, and if it
thinks it's fishy, it will drop it silently. In this case, we
leaked an r2t_info object. If we do this often enough, we run
into a BUG_ON some time later.

Removed r2t wrappers and update patch by Mike Christie
Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Convert xmit to iscsi chunks.

from michaelc@cs.wisc.edu:

Bug fixes, more digest integration, sg chaining conversion and other
sg wrapper changes, coding style sync up, and removal of io fields,
like pdu_sent, that are not needed.
Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The driver does not need the host lock in queuecommand so drop it.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If the current ctask is failed early, we legt the conn->ctask pointer
pointing to a invalid task. When the xmit thread would send data for
it, we would then oops.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If the target requests a logout, then we do not want
to fail commands to scsi-ml right away. This patch just
fails in pending commands for a requeue immediately, and then lets
iscsid handle running commands like normal recovery.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Use open-iscsi.org instead of linux-iscsi.sf.net, which hasn't been
updated for ages.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

During root boot and shutdown the target could send us nops.
At this time iscsid cannot be running, so the target will drop
the session and the boot or shutdown will hang.

To handle this and allow us to better control when to check the network
this patch moves the nop handling to the kernel.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

We were using the device delete sysfs file to remove each device
then logout. Now in 2.6.21 this will not work because
the sysfs delete file returns immediately and does not wait for
the device removal to complete. This causes a hang if a cache sync
is needed during shutdown. Before .21, that approach had other
problems, so this patch fixes the shutdown code so that we remove the target
and unbind the session before logging out and shut down the session
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

I thought we may not need the eh mutex during host reset, but that is wrong
with the new shutdown code. When start_session_recovery sets the state to
terminate then drops the session lock. The scsi eh thread could then grab the
session lock see that we are terminating and then return failed to scsi-ml.
scsi-ml's eh then owns the command and will do whatever it wants
with it. But then the iscsi eh thread could grab the session lock
and want to complete the scsi commands that we in the LLD, but
it no longer owns them and kaboom.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

There is just too much going on through the common workq and
something like a scsi device removal through sysfs affects
how long it will take to recover the transport, mark it as
failed, or shut it down gracefully.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

There is not need to block the session during logout. Since
we are going to fail the commands that were blocked just fail them
immediately instead.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

iscsi_pool_init simplified

iscsi_pool_init currently has a lot of duplicate kfree() calls it does
when some allocation fails. This patch simplifies the code a little by
using iscsi_pool_free to tear down the pool in case of an error.

iscsi_pool_init also returns a copy of the item array to the caller.
Not all callers use this array, so we make it optional.

Instead of allocating a second array and return that, allocate just one
array, of twice the size.

Update users of iscsi_pool_{init,free}

This patch drops the (now useless) second argument to
iscsi_pool_free, and updates all callers.

It also removes the ctask->r2ts array, which was never
used anyway. Since the items argument to iscsi_pool_init
is now optional, we can pass NULL instead.
Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  - The default initialization of hdr_max is the minimum -
    sizeof(struct iscsi_cmd) - Once this patch goes into iser the default
    initialization at libiscsi can be removed.
  - This is not yet full support for AHSs at iser end. But it should be easy.
    Just allocate more space at iser_desc right after iscsi_hdr. Than
    at transmission time use ctask->hdr_len to retrieve the total
    size of all iscsi pdu headers. See previous patch at iscsi_tcp.[ch]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  at libiscsi generic code
  - currently code assumes a storage space of pdu header is allocated
    at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add
    a hdr_max field pertaining to that storage, and an hdr_len that
    accumulates the current use of the pdu-header.

  - Add an iscsi_next_hdr() inline which returns the next free space
    to write new Header at. Also iscsi_next_hdr() is used to retrieve
    the address at which to write the header-digest.

  - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr()
    for address of the new header, than calls iscsi_add_hdr(length) with
    the size of the new header. iscsi_add_hdr() will check if space is
    available and update to the new size. length must be padded according
    to standard.

  - Add 2 padding inline helpers thanks to Olaf. Current patch does not
    use them but Following patches will.
    Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had
    PAD_WORD_LEN that was never used anywhere.

  - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now  it is
    possible that it will fail.

  - I was tired of yet again writing a "this is a digest" comment next to
    sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need
    any comments. Changed all places that used sizeof(__u32) or "4" in
    connection to a digest.

  iscsi_tcp specific code
  - At struct iscsi_tcp_cmd_task allocate maximum space allowed in
    standard for all headers following the iscsi_cmd header. and mark
    it so in iscsi_tcp_session_create()
  - At iscsi_send_cmd_hdr() retrieve the correct headers size and
    write header digest at iscsi_next_hdr().
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  - Check to see that OVERFLOW is not negative indicating
    a bug.
  - Unify handling of UNDERFLOW and OVERFLOW to the same
    code.
  - Also handle BIDI_OVERFLOW.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>