- 25 2月, 2014 19 次提交
-
-
由 Daniel Borkmann 提交于
Drivers are allowed to set NETIF_F_SCTP_CSUM if they have hardware crc32c checksumming support for the SCTP protocol. Currently, NETIF_F_SCTP_CSUM flag is available in igb, ixgbe, i40e/i40evf drivers and for vlan devices. If we don't have NETIF_F_SCTP_CSUM then crc32c is done through CPU instructions, invoked from crypto layer, or if not available as slow-path fallback in software. Currently, loopback device propagates checksum offloading feature flags in dev->features, but is missing SCTP checksum offloading. Therefore, account for NETIF_F_SCTP_CSUM as well. Before patch: ./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 4194304 4194304 4096 10.00 4683.50 After patch: ./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 4194304 4194304 4096 10.00 15348.26 Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The documentation misses a few of the supported flags. Fix this. Also respect the dependency to CONFIG_XFRM for the IPSEC flag. Cc: Fan Du <fan.du@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The 'out' label is just a relict from previous times as pgctrl_write() had multiple error paths. Get rid of it and simply return right away on errors. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
If a privileged user writes an empty string to /proc/net/pktgen/pgctrl the code for stripping the (then non-existent) '\n' actually writes the zero byte at index -1 of data[]. The then still uninitialized array will very likely fail the command matching tests and the pr_warning() at the end will therefore leak stack bytes to the kernel log. Fix those issues by simply ensuring we're passed a non-empty string as the user API apparently expects a trailing '\n' for all commands. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Shahed Shaikh says: ==================== qlcnic: Re-factoring and enhancements This patch series includes following changes - * Re-factored firmware minidump template header handling * Support to make 8 vNIC mode application to work with 16 vNIC mode * Enhance error message logging when adapter is in failed state and when adapter lock access fails. * Allow vlan0 traffic * update MAINTAINERS Please apply this series to net-next. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Keep myself as only maintainer for qlcnic driver and update group email alias to Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harish Patil 提交于
Signed-off-by: NHarish Patil <harish.patil@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Adapter allows vlan0 traffic in case of SR-IOV after setting QLC_SRIOV_ALLOW_VLAN0 bit even though we do not add vlan0 filters. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Qlogic application interface in the driver which has larger than 8 vNIC configuration support has been updated to handle the following cases: o Only 8 or lower total vNICs were enabled within the vNIC 0-7 range o vNICs were enabled in the vNIC 0-15 range such that enabled vNICs were not contiguous and only 8 or lower number of total VNICs were enabled o Disconnect in the vNIC mapping between application and driver when the enabled VNICs were dis contiguous Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Amir Vadai says: ==================== net/mlx4: Mellanox driver update 01-01-2014 This small patchset has a fix to a bogus usage of netif_get_num_default_rss_queues() in mlx4_en driver. Changes from V1: - Removed affinity_hint patch, to make it a generic instead of mlx specific Changes from V0: - Instead of reverting the netif_get_num_default_rss_queues() in mlx4_en, fixing it to limit the actual number of receive queues instead of limiting the number of IRQ's. Patchset was applied and tested against commit: cb6e926e "ipv6:fix checkpatch errors with assignment in if condition" ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Shamay 提交于
This fix a performance bug introduced by commit 90b1ebe7 "mlx4: set maximal number of default RSS queues", which limits the numbers of IRQs opened by core module. The limit should be on the number of queues in the indirection table - rx_rings, and not on the number of IRQ's. Also, limiting on mlx4_core initialization instead of in mlx4_en, prevented using "ethtool -L" to utilize all the CPU's, when performance mode is prefered, since limiting this number to 8 reduces overall packet rate by 15%-50% in multiple TCP streams applications. For example, after running ethtool -L <ethx> rx 16 Packet rate Before the fix 897799 After the fix 1142070 Results were obtained using netperf: S=200 ; ( for i in $(seq 1 $S) ; do ( \ netperf -H 11.7.13.55 -t TCP_RR -l 30 &) ; \ wait ; done | grep "1 1" | awk '{SUM+=$6} END {print SUM}' ) CC: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Shamay 提交于
mlx4_en_add() is too long. Moving set number of RX rings to a utiltity function to improve readability and modulization of the code. Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The bond_xxx_info_query() was already in RTNL, so no need to use bond lock to protect the bond slave list, so remove it. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The bond_info_show_master already in RCU read-side critical section, and the we access curr_active_slave without the curr_slave_lock, we could not sure whether the curr_active_slave will be changed during the processing, so use RCU to protected the pointer. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The __netpoll_setup() will check the slave's flag and ndo_poll_controller just like the slave_dev_support_netpoll() does, and slave_dev_support_netpoll() was not used by any place, so remove it. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next由 David S. Miller 提交于
Steffen Klassert says: ==================== 1) Introduce skb_to_sgvec_nomark function to add further data to the sg list without calling sg_unmark_end first. Needed to add extended sequence number informations. From Fan Du. 2) Add IPsec extended sequence numbers support to the Authentication Header protocol for ipv4 and ipv6. From Fan Du. 3) Make the IPsec flowcache namespace aware, from Fan Du. 4) Avoid creating temporary SA for every packet when no key manager is registered. From Horia Geanta. 5) Support filtering of SA dumps to show only the SAs that match a given filter. From Nicolas Dichtel. 6) Remove caching of xfrm_policy_sk_bundles. The cached socket policy bundles are never used, instead we create a new cache entry whenever xfrm_lookup() is called on a socket policy. Most protocols cache the used routes to the socket, so this caching is not needed. 7) Fix a forgotten SADB_X_EXT_FILTER length check in pfkey, from Nicolas Dichtel. 8) Cleanup error handling of xfrm_state_clone. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 2月, 2014 15 次提交
-
-
由 David S. Miller 提交于
Aaron Brown says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e and (mostly to) i40evf. Mitch provides most the work for this series. For the vf driver he requests a reset on a tx hang, removes vlan filtes on close since we already remove the MAC filters, fixes some crashes, gets rid of PCI DAC as it does not mean much on virtualized PCIe parts, skips assigning the device name that just gets renamed anyway, stores the descriptor ring size in a manner that allows the use of common tx and rx code with the PF driver and makes a handful of cosmetic fixes. For i40e he removes a delay left over from debugging and changes a do/while loop to a for loop to avoid hitting another delay each time. Catherine fixes inconsistent MSI and MSI-X messages and bumps the driver version. v2: Removed unnecessary periods and redundant OOM message. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
Update the driver versions. Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
Fix inconsistent use of MSIX and MSI-X in messages. Change-ID: Iae9ffb42819677c34544719044ed77632e06147d Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
Change the do/while to a for loop, so we don't hit the delay each time, even when the register is ready for action. Don't bother to set or clear the QENA_STAT bit as it is read-only. Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
Ain't nothing gonna break my stride, nobody's gonna slow me down, oh no. I got to keep on moving. This was originally put in for debugging just-in-case purposes and never removed. Change-ID: Ic12c2e179c3923f54e6ba0a9e4ab05d25c3bab29 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch A Williams 提交于
Remove a bogus space. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
A bunch of changes merit a new version number, and since these were made in the new year, update the copyright date. Change-ID: Ic3f282bf0c20679b9fb06860211afa7c78055bc2 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
Keep the descriptor ring size in the actual ring structs instead of in the adapter struct. This enables us to use common tx and rx code with the i40e PF driver. Also update copyrights. Change-ID: I2861e599b2b4c76441c062ea14400f4750f54d0e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
We don't need to set an interface name here; the net core will do that, and then it will get renamed by udev anyway. Change-ID: I839a17837d19bedd1f490bff32ac5b85b4bfd97f Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
This comment is simply not true. Change-ID: If006b02b60984601a24257a951ae873dff568008 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
Make sure errors are reported at the correct log level, quit printing the function name every time, and make the messages more consistent in format. v2: Removed unnecessary periods and redundant OOM message. Change-ID: I50e443467519ad3850def131d84626c50612c611 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
PCI DAC doesn't really mean much on a virtualized PCI Express part, so get rid of that check and just always set the HIGHDMA flag in the net device. Change-ID: I2040272be0e7934323f470c2bc73fbdd4f93e2b6 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
Depending upon the state of the driver, there are several potential pitfalls on remove. Kill the watchdog task so rmmod doesn't hang. Check the adapter->msix_entries field, not the num_msix_vectors field, which is never cleared. Change-ID: I0546048477f09fc19e481bd37efa30daae4faa88 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
We remove all the MAC filters, so remove the VLAN filters, too. Change-ID: I4f7559acdf005dc3f359bf6460ce32d183c8878b Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
If the kernel watchdog bites us, ask the PF to reset us and attempt to reinit the driver. Change-ID: Ic97665aeeed71ce712b9c4f057e78ff8372522b9 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2014 5 次提交
-
-
由 Steffen Klassert 提交于
The error pointer passed to xfrm_state_clone() is unchecked, so remove it and indicate an error by returning a null pointer. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Nicolas Dichtel 提交于
This patch fixes commit d3623099 ("ipsec: add support of limited SA dump"). sadb_ext_min_len array should be updated with the new type (SADB_X_EXT_FILTER). Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next由 David S. Miller 提交于
John W. Linville says: ==================== Please pull this batch of wireless updates intended for the 3.15 stream! For the mac80211 bits, Johannes says: "We have some cleanups and minor fixes as well as userspace API improvements from a lot of people, extended VHT support for radiotap from Emmanuel, CSA improvements from Andrei, Luca and Michal. I've also included my work on hwsim to make dynamic registration of radios possible." Along with that, we get the usual round of updates to ath9k, brcmfmac, mwifiex, wcn36xx, and the ti drivers -- nothing particularly noteworthy, mostly just random updates and refactoring. Also included is a pull of the wireless tree, intended to resolve some potential merge issues. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
由 Veaceslav Falico 提交于
bond->curr_active_slave can be changed between its deferences, even to NULL, and thus we might panic. We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv()) so fix this by rcu_dereferencing() it and using the saved. Reported-by: NDing Tianhong <dingtianhong@huawei.com> Fixes: aeea64ac ("bonding: don't trust arp requests unless active slave really works") CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Acked-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 2月, 2014 1 次提交
-
-
由 Haiyang Zhang 提交于
It auto negotiates the highest NetVSP version supported by both guest and host. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-