- 02 2月, 2006 40 次提交
-
-
由 Christoph Lameter 提交于
Check for PageSwapCache after looking up and locking a swap page. The page migration code may change a swap pte to point to a different page under lock_page(). If that happens then the vm must retry the lookup operation in the swap space to find the correct page number. There are a couple of locations in the VM where a lock_page() is done on a swap page. In these locations we need to check afterwards if the page was migrated. If the page was migrated then the old page that was looked up before was freed and no longer has the PageSwapCache bit set. Signed-off-by: NHirokazu Takahashi <taka@valinux.co.jp> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
If large amounts of zone memory are used by empty slabs then zone_reclaim becomes uneffective. This patch shakes the slab a bit. The problem with this patch is that the slab reclaim is not containable to a zone. Thus slab reclaim may affect the whole system and be extremely slow. This also means that we cannot determine how many pages were freed in this zone. Thus we need to go off node for at least one allocation. The functionality is disabled by default. We could modify the shrinkers to take a zone parameter but that would be quite invasive. Better ideas are welcome. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
In some situations one may want zone_reclaim to behave differently. For example a process writing large amounts of memory will spew unto other nodes to cache the writes if many pages in a zone become dirty. This may impact the performance of processes running on other nodes. Allowing writes during reclaim puts a stop to that behavior and throttles the process by restricting the pages to the local zone. Similarly one may want to contain processes to local memory by enabling regular swap behavior during zone_reclaim. Off node memory allocation can then be controlled through memory policies and cpusets. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Currently the zone_reclaim code has a fixed window of 30 seconds of off node allocations should a local zone have no unused pagecache pages left. Reclaim will be attempted again after this timeout period to avoid repeated useless scans for memory. This is also useful to established sufficiently large off node allocation chunks to relieve the local node. It may be beneficial to adjust that time period for some special situations. For example if memory use was exceeding node capacity one may want to give up for longer periods of time. If memory spikes intermittendly then one may want to shorten the time period to reduce the number of off node allocations. This patch allows just that.... Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Instead of scanning all the pages in a zone, imitate real swap and scan only a portion of the pages and gradually scan more if we do not free up enough pages. This avoids a zone suddenly loosing all unused pagecache pages (we may after all access some of these again so they deserve another chance) but it still frees up large chunks of memory if a zone only contains unused pagecache pages. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
zone_reclaim should leave that to the real swapper. We are only interested in evicting unmapped pages. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
2.6.15's hugepage faulting introduced huge_pages_needed accounting into hugetlbfs: to count how many pages are already in cache, for spot check on how far a new mapping may be allowed to extend the file. But it's muddled: each hugepage found covers HPAGE_SIZE, not PAGE_SIZE. Once pages were already in cache, it would overshoot, wrap its hugepages count backwards, and so fail a harmless repeat mapping with -ENOMEM. Fixes the problem found by Don Dupuis. Signed-off-by: NHugh Dickins <hugh@veritas.com> Acked-By: NAdam Litke <agl@us.ibm.com> Acked-by: NWilliam Irwin <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin LaHaise 提交于
Improve the performance of slab_put_obj(). Without the cast, gcc considers ptrdiff_t a 64 bit signed integer and ends up emitting code to use a full signed 128 bit divide on EM64T, which is substantially slower than a 32 bit unsigned divide. I noticed this when looking at the profile of a case where the slab balance is just on edge and thrashes back and forth freeing a block. Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
- If we only reclaim nr_pages then its okay to stay on node. Switch from > to >= for the comparison. - vm_table[] entry for zone_reclaim_mode is a bit screwed up. - Add empty lines around shrink_zone to show that this is the central function to be called. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Make sc->may_writepage control the writeout behavior of shrink_list. Remove the laptop_mode trick from shrink_list and instead set may_writepage in try_to_free_pages properly. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
GFP_ZONETYPES calculate from GFP_ZONEMASK GFP_ZONETYPES's value is directly related to the value of GFP_ZONEMASK. It takes one of two forms depending whether the top bit of GFP_ZONEMASK is a 'loner'. Supply both forms, enabling the loner. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
GFP_ZONETYPES define using GFP_ZONEMASK and add commentry Add commentry explaining the optimisation that we can apply to GFP_ZONETYPES when the leftmost bit is a 'loaner', it can only be set in isolation. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Zone reclaim is usually only run on the local node. Headless nodes do not have any local processors. This patch checks for headless nodes and performs zone reclaim on them. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Ensure that the performance of off node pages stays the same as before. Off node pagefault tests showed an 18% drop in performance without this patch. - Increase the timeout to 30 seconds to reduce the overhead. - Move all code possible out of the off node hot path for zone reclaim (Sorry Andrew, the struct initialization had to be sacrificed). The read_page_state() bit us there. - Check first for the timeout before any other checks. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
OpenBSD doesn't see "." correctly in directories created by Linux. Copying files over several KB will buy you infinite loop in __getblk_slow(). Copying files smaller than 1 KB seems to be OK. Sometimes files will be filled with zeros. Sometimes incorrectly copied file will reappear after next file with truncated size. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
The flattened device tree is the only supported way of booting ARCH=powerpc kernels on non Open Firmware machines. The documentation for the flattened tree format and contents has been discussed on mailing lists and lately has been living in the dtc git tree. Really, it ought to go in the kernel's Documentation directory for maximum visibility. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
Prevent the kernel from setting the log level to 10 unconditionally during suspend/resume which was needed in the past for debugging, but generally is undesirable. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Jones 提交于
Whoops. kobject_register failed for hexium HV-PCI6/Orion (-13) [<c01d3eb6>] kobject_register+0x31/0x47 [<c023a996>] bus_add_driver+0x4a/0xfd [<c01de3c1>] __pci_register_driver+0x82/0xa4 [<d083400a>] hexium_init_module+0xa/0x47 [hexium_orion] [<c013bdae>] sys_init_module+0x167b/0x1822 [<c01633f7>] do_sync_read+0xb8/0xf3 [<c0133fa3>] autoremove_wake_function+0x0/0x2d [<c0145390>] audit_syscall_entry+0x118/0x13f [<c0106ae2>] do_syscall_trace+0x104/0x14a [<c0103d21>] syscall_call+0x7/0xb slashes in kobject names aren't allowed. Signed-off-by: NDave Jones <davej@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 V. Ananda Krishnan 提交于
Scott Kilau <Scott_Kilau@digi.com> Digi serial port console doesn't work when baud rates are set higher than 38400. So the lookup table and code in jsm_neo.c has been modified and tested. Please let me have the feed-back. Signed-off-by: NV.Ananda Krishnan <mansarov@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
Avoid lost tick compensation early in boot before the TSCs are synchronized. Currently timekeeping is enabled before the TSCs are synchronized, thus when the TSCs are synched (reset to zero), it appears that a number of lost ticks have occurred. This can cause premature expiry of timers and in extreme cases can cause the soft lockup detection to fire. This resolves issues reported by Andy Whitcroft as well as bug #5366 reported by Tim Mann. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Acked-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jack Steiner 提交于
Change sched_getaffinity() so that it returns a bitmap that indicates the legally schedulable cpus that a task is allowed to run on. Without this patch, if CONFIG_HOTPLUG_CPU is enabled, sched_getaffinity() unconditionally returns (at least on IA64) a mask with NR_CPUS bits set. This conveys no useful infornmation except for a kernel compile option. This fixes a breakage we obseved running recent kernels. We have MPI jobs that use sched_getaffinity() to determine where to place their threads. Placing them on non-existant cpus is problematic :-) Signed-off-by: NJack Steiner <steiner@sgi.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Nathan Lynch <ntl@pobox.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bryan O'Sullivan 提交于
This assembly version is measurably faster than the generic version in lib/iomap_copy.c. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bryan O'Sullivan 提交于
This arch-independent routine copies data to a memory-mapped I/O region, using 32-bit accesses. The naming is double-underscored to make it clear that it does not guarantee write ordering, nor does it perform a memory barrier afterwards; the kernel doc also explicitly states this. This style of access is required by some devices. This change also introduces include/linux/io.h, at Andrew's suggestion. It only has one occupant at the moment, but is a logical destination for oft-replicated contents of include/asm-*/{io,iomap}.h to migrate to. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bryan O'Sullivan 提交于
This can make the intent behind some arithmetic expressions clearer. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This function is neither used nor has any real contents. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
The expiry time for relative timers with SIGEV_NONE set was never updated to the correct value. Pointed out by George Anzinger. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
At some point we added credits to people who actively helped to bring k/hr-timers along. This was lost in the big code revamp. Add it back. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 George Anzinger 提交于
Clean up the interface to hrtimers by changing the init code to pass the mode as well as the clock. This allow the init code to select the correct base and eliminates extra timer re-init code in posix-timers. We also simplify the restart interface nanosleep use. Signed-off-by: NGeorge Anzinger <george@mvista.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 akpm@osdl.org 提交于
From: Steven Rostedtrostedt@goodmis.org <rostedt@goodmis.org> CPU0 expires a posix-timer and runs the callback function. The signal is queued. After releasing the posix-timer lock and before returning to hrtimer_run_queue CPU0 gets interrupted. CPU1 delivers the queued signal and rearms the timer. CPU0 comes back to hrtimer_run_queue and sets the timer state to expired. The next modification of the timer can result in an oops, because the state information is wrong. Keep track of state = RUNNING and check if the state has been in the return path of hrtimer_run_queue. In case the state has been changed, ignore a restart request and do not touch the state variable. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
This resolves bugzilla bug#5617. The oldvalue of the timer was read after the timer was cancelled, so the remaining time was always zero. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
Fixup the conversion of posix-timers to hrtimers. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
The itimer conversion removed the locking which protects the timer and variables in the shared signal structure. Steven Rostedt found the problem in the latest -rt patches. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
Make swsusp use bytes as the image size units, which is needed for future compatibility. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
CC arch/um/sys-i386/ldt.o arch/um/sys-i386/ldt.c:19:21: proc_mm.h: No such file or directory make[1]: *** [arch/um/sys-i386/ldt.o] Error 1 Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Remove event_data_size since it was pointed out in tpm_bios-indexing- fix.patch that is was ugly and it wasn't actually being used. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Fixing the sparse warnings on the acpi_os_map_memory calls pointed out by Randy. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Attempting to insert the tpm modules fails because the tpm_bios file is missing a license statement. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
It generates warnings: drivers/char/tpm/tpm_bios.c: In function `get_event_name': drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size and I'm not sure what the code is doing there, but it seems wrong. We're using the address of the buffer rather than the contents of it. The patch adds more nasty typecasting, but I think the whole arrangement could be done in a more typesafe manner. Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
These functions return ERR_PTR()s on error, not NULL. Spotted by Randy. Cc: Serge Hallyn <serue@us.ibm.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-