Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 10 4月, 2008 1 次提交
    • F
      [Syncookies]: Add support for TCP options via timestamps. · 4dfc2817
      由 Florian Westphal 提交于 
      Allow the use of SACK and window scaling when syncookies are used
and the client supports tcp timestamps. Options are encoded into
the timestamp sent in the syn-ack and restored from the timestamp
echo when the ack is received.

Based on earlier work by Glenn Griffin.
This patch avoids increasing the size of structs by encoding TCP
options into the least significant bits of the timestamp and
by not using any 'timestamp offset'.

The downside is that the timestamp sent in the packet after the synack
will increase by several seconds.

changes since v1:
 don't duplicate timestamp echo decoding function, put it into ipv4/syncookie.c
 and have ipv6/syncookies.c use it.
 Feedback from Glenn Griffin: fix line indented with spaces, kill redundant if ()
Reviewed-by: NHagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4dfc2817
  3. 08 4月, 2008 1 次提交
    • I
      [TCP]: tcp_simple_retransmit can cause S+L · 882bebaa
      由 Ilpo Järvinen 提交于 
      This fixes Bugzilla #10384

tcp_simple_retransmit does L increment without any checking
whatsoever for overflowing S+L when Reno is in use.

The simplest scenario I can currently think of is rather
complex in practice (there might be some more straightforward
cases though). Ie., if mss is reduced during mtu probing, it
may end up marking everything lost and if some duplicate ACKs
arrived prior to that sacked_out will be non-zero as well,
leading to S+L > packets_out, tcp_clean_rtx_queue on the next
cumulative ACK or tcp_fastretrans_alert on the next duplicate
ACK will fix the S counter.

More straightforward (but questionable) solution would be to
just call tcp_reset_reno_sack() in tcp_simple_retransmit but
it would negatively impact the probe's retransmission, ie.,
the retransmissions would not occur if some duplicate ACKs
had arrived.

So I had to add reno sacked_out reseting to CA_Loss state
when the first cumulative ACK arrives (this stale sacked_out
might actually be the explanation for the reports of left_out
overflows in kernel prior to 2.6.23 and S+L overflow reports
of 2.6.24). However, this alone won't be enough to fix kernel
before 2.6.24 because it is building on top of the commit
1b6d427b ([TCP]: Reduce sacked_out with reno when purging
write_queue) to keep the sacked_out from overflowing.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      882bebaa
  5. 21 3月, 2008 2 次提交
    • P
      [NET]: Add per-connection option to set max TSO frame size · 82cc1a7a
      由 Peter P Waskiewicz Jr 提交于 
      Update: My mailer ate one of Jarek's feedback mails...  Fixed the
parameter in netif_set_gso_max_size() to be u32, not u16.  Fixed the
whitespace issue due to a patch import botch.  Changed the types from
u32 to unsigned int to be more consistent with other variables in the
area.  Also brought the patch up to the latest net-2.6.26 tree.

Update: Made gso_max_size container 32 bits, not 16.  Moved the
location of gso_max_size within netdev to be less hotpath.  Made more
consistent names between the sock and netdev layers, and added a
define for the max GSO size.

Update: Respun for net-2.6.26 tree.

Update: changed max_gso_frame_size and sk_gso_max_size from signed to
unsigned - thanks Stephen!

This patch adds the ability for device drivers to control the size of
the TSO frames being sent to them, per TCP connection.  By setting the
netdevice's gso_max_size value, the socket layer will set the GSO
frame size based on that value.  This will propogate into the TCP
layer, and send TSO's of that size to the hardware.

This can be desirable to help tune the bursty nature of TSO on a
per-adapter basis, where one may have 1 GbE and 10 GbE devices
coexisting in a system, one running multiqueue and the other not, etc.

This can also be desirable for devices that cannot support full 64 KB
TSO's, but still want to benefit from some level of segmentation
offloading.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      82cc1a7a
    • P
      [TCP]: Fix shrinking windows with window scaling · 607bfbf2
      由 Patrick McHardy 提交于 
      When selecting a new window, tcp_select_window() tries not to shrink
the offered window by using the maximum of the remaining offered window
size and the newly calculated window size. The newly calculated window
size is always a multiple of the window scaling factor, the remaining
window size however might not be since it depends on rcv_wup/rcv_nxt.
This means we're effectively shrinking the window when scaling it down.


The dump below shows the problem (scaling factor 2^7):

- Window size of 557 (71296) is advertised, up to 3111907257:

IP 172.2.2.3.33000 > 172.2.2.2.33000: . ack 3111835961 win 557 <...>

- New window size of 514 (65792) is advertised, up to 3111907217, 40 bytes
  below the last end:

IP 172.2.2.3.33000 > 172.2.2.2.33000: . 3113575668:3113577116(1448) ack 3111841425 win 514 <...>

The number 40 results from downscaling the remaining window:

3111907257 - 3111841425 = 65832
65832 / 2^7 = 514
65832 % 2^7 = 40

If the sender uses up the entire window before it is shrunk, this can have
chaotic effects on the connection. When sending ACKs, tcp_acceptable_seq()
will notice that the window has been shrunk since tcp_wnd_end() is before
tp->snd_nxt, which makes it choose tcp_wnd_end() as sequence number.
This will fail the receivers checks in tcp_sequence() however since it
is before it's tp->rcv_wup, making it respond with a dupack.

If both sides are in this condition, this leads to a constant flood of
ACKs until the connection times out.

Make sure the window is never shrunk by aligning the remaining window to
the window scaling factor.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      607bfbf2
  7. 12 3月, 2008 1 次提交
  9. 04 3月, 2008 1 次提交
  11. 01 2月, 2008 1 次提交
  13. 29 1月, 2008 21 次提交
  15. 05 12月, 2007 1 次提交
  17. 23 11月, 2007 2 次提交
  19. 20 11月, 2007 1 次提交
  21. 12 10月, 2007 1 次提交
  23. 11 10月, 2007 7 次提交