A bunch of places assumed pointers were 32-bits in size (bit checking and
debug output), but none of these affected runtime functionality.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the resource_size function instead of manually calculating the
resource size. This reduces the chance of introducing off-by-one errors.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Blackfin port doesn't support HAVE_CLK and the musb driver works fine
with support stubbed out, so take the existing Blackfin clk stubs and move
them to common musb code so we can drop the Kconfig dependency.
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When an endpoint is to be dropped from the hardware bandwidth schedule, we
want to clear its add flag.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When the host controller dies or is removed while a device is plugged in,
the USB core will attempt to deallocate the struct usb_device.  That will
call into xhci_free_dev().  This function used to attempt to submit a
disable slot command to the host controller and clean up the device
structures when that command returned.  Change xhci_free_dev() to skip the
command submission and just free the memory if the host controller died.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When the host controller dies (e.g. it is removed from a PCI card slot),
the xHCI driver cannot expect commands to complete.  The buggy code this
patch fixes would mark an URB as canceled and then expect the URB to be
completed when the stop endpoint command completed.  That would never
happen if the host controller was dead, so the USB core would just hang in
the disconnect code.

If the host controller died, and the driver asks to cancel an URB, free
any structures associated with that URB and immediately give it back.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If the host controller card is removed from the system, stop the timer
function to debug the xHCI rings.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current 10ms timeout is too short for some normal USBTMC device
operation, increase it to a value which was tested with previously
affected Tektronix oscilloscopes.
Signed-off-by: NGergely Imreh <imrehg@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPeter Magdina <peter@magdina.sk>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stanse found a memory leak in lcd_probe. Instead of returning without
releasing the memory, jump to the error label which frees it.

http://stanse.fi.muni.cz/Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Updated sierra driver version from 1.3.7 to 1.3.8 now that the autosuspend
capabilities were added to the driver.
Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1295) fixes a recently-added bug in the USB serial core.
If certain kinds of errors occur during probing, the core may call a
serial driver's release method without previously calling the attach
method.  This causes some drivers (io_ti in particular) to perform an
invalid memory access.

The patch adds a new flag to keep track of whether or not attach has
been called.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NJean-Denis Girard <jd.girard@sysnux.pf>
CC: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a regression introduced in
39892da4.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Acked-by: NOliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix regression introduced by commit
d4fc4a7b (tty: Fix the PL2303 private
methods for sysrq).
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Re-structure read processing.
 - Kill obsolete work queue and always push to tty in completion handler.
 - Use tty_insert_flip_string instead of per character push when
   possible.
 - Fix stalled-read regression in 2.6.31 by using urb status to
   determine when port is closed rather than port count.
 - Fix race with open/close by checking ASYNCB_INITIALIZED in
   unthrottle.
 - Kill private rx_flag and lock and use throttle flags in
   usb_serial_port instead.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove superfluous error checks in completion handler:

 - No need to check private data and urb pointers as we check urb-status
   before dereferencing priv (which is not freed until urb has been killed
   on close).
 - No need to check tty as it is checked again when processing.
 - No need to check urb->number_of_packets on bulk urb.

Note that both private data and tty are checked again before processing
(possibly from work queue which also is cancelled on close).
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unused rx_byte counter which is never exposed as noted by Alan
Cox.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes tty_flip_buffer_push being called from hard interrupt context with
low_latency set.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_atp867x: add Power Management support
  pata_atp867x: PIO support fixes
  pata_atp867x: clarifications in timings calculations and cable detection
  pata_atp867x: fix it to not claim MWDMA support
  libata: fix incorrect link online check during probe
  ahci: filter FPDMA non-zero offset enable for Aspire 3810T
  libata: make gtf_filter per-dev
  libata: implement more acpi filtering options
  libata: cosmetic updates
  ahci: display all AHCI 1.3 HBA capability flags (v2)
  pata_ali: trivial fix of a very frequent spelling mistake
  ahci: disable 64bit DMA by default on SB600s

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: fix requeue_pi key imbalance
  futex: Fix typo in FUTEX_WAIT/WAKE_BITSET_PRIVATE definitions
  rcu: Place root rcu_node structure in separate lockdep class
  rcu: Make hot-unplugged CPU relinquish its own RCU callbacks
  rcu: Move rcu_barrier() to rcutree
  futex: Move exit_pi_state() call to release_mm()
  futex: Nullify robust lists after cleanup
  futex: Fix locking imbalance
  panic: Fix panic message visibility by calling bust_spinlocks(0) before dying
  rcu: Replace the rcu_barrier enum with pointer to call_rcu*() function
  rcu: Clean up code based on review feedback from Josh Triplett, part 4
  rcu: Clean up code based on review feedback from Josh Triplett, part 3
  rcu: Fix rcu_lock_map build failure on CONFIG_PROVE_LOCKING=y
  rcu: Clean up code to address Ingo's checkpatch feedback
  rcu: Clean up code based on review feedback from Josh Triplett, part 2
  rcu: Clean up code based on review feedback from Josh Triplett

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Set correct normal_prio and prio values in sched_fork()

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pci: Correct spelling in a comment
  x86: Simplify bound checks in the MTRR code
  x86: EDAC: carve out AMD MCE decoding logic
  initcalls: Add early_initcall() for modules
  x86: EDAC: MCE: Fix MCE decoding callback logic

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: user local buffer variable for trace branch tracer
  tracing: fix warning on kernel/trace/trace_branch.c andtrace_hw_branches.c
  ftrace: check for failure for all conversions
  tracing: correct module boundaries for ftrace_release
  tracing: fix transposed numbers of lock_depth and preempt_count
  trace: Fix missing assignment in trace_ctxwake_*
  tracing: Use free_percpu instead of kfree
  tracing: Check total refcount before releasing bufs in profile_enable failure

Merge branch 'sparc-perf-events-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sparc-perf-events-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mm, perf_event: Make vmalloc_user() align base kernel virtual address to SHMLBA
  perf_event: Provide vmalloc() based mmap() backing

Merge branch 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_events: Make ABI definitions available to userspace
  perf tools: elf_sym__is_function() should accept "zero" sized functions
  tracing/syscalls: Use long for syscall ret format and field definitions
  perf trace: Update eval_flag() flags array to match interrupt.h
  perf trace: Remove unused code in builtin-trace.c
  perf: Propagate term signal to child

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, timers: Check for pending timers after (device) interrupts
  NOHZ: update idle state also when NOHZ is inactive

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724: increase SPDIF and independent stereo buffer sizes
  ALSA: opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off()
  ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from MIXER to PCM type
  ALSA: hda - Fix yet another auto-mic bug in ALC268
  ASoC: WM8350 capture PGA mutes are inverted
  ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI
  sound: via82xx: move DXS volume controls to PCM interface
  ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()
  ALSA: hda - Add a workaround for ASUS A7K
  ALSA: hda - Fix invalid initializations for ALC861 auto mode
  ASoC: wm8940: Fix check on error code form snd_soc_codec_set_cache_io
  ASoC: Fix SND_SOC_DAPM_LINE handling

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (24 commits)
  drm/radeon/kms: fix vline register for second head.
  drm/r600: avoid assigning vb twice in blit code
  drm/radeon: use list_for_each_entry instead of list_for_each
  drm/radeon/kms: Fix AGP support for R600/RV770 family (v2)
  drm/radeon/kms: Fallback to non AGP when acceleration fails to initialize (v2)
  drm/radeon/kms: Fix RS600/RV515/R520/RS690 IRQ
  drm/radeon: Fix setting of bits
  drm/ttm: fix refcounting in ttm global code.
  drm/fb: add more correct 8/16/24/32 bpp fb support.
  drm/fb: add setcmap and fix 8-bit support.
  drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)
  drm: Delete the DRM_DEBUG_KMS in drm_mode_cursor_ioctl
  drm/radeon/kms: add support for "Surround View"
  drm/radeon/kms: Fix irq handling on AVIVO hw
  drm/radeon/kms: R600/RV770 remove dead code and print message for wrong BIOS
  drm/radeon/kms: Fix R600/RV770 disable acceleration path
  drm/radeon/kms: Fix R600/RV770 startup path & reset
  drm/radeon/kms: Fix R600 write back buffer
  drm/radeon/kms: Remove old init path as no hw use it anymore
  drm/radeon/kms: Convert RS600 to new init path
  ...

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omapfb: Blizzard: constify register address tables
  omapfb: Blizzard: fix pointer to be const
  omapfb: Condition mutex acquisition
  omap: iovmm: Add missing mutex_unlock
  omap: iovmm: Fix incorrect spelling
  omap: SRAM: flush the right address after memcpy in omap_sram_push
  omap: Lock DPLL5 at boot
  omap: Fix incorrect 730 vs 850 detection
  OMAP3: PM: introduce a new powerdomain walk helper
  OMAP3: PM: Enable GPIO module-level wakeups
  OMAP3: PM: USBHOST: clear wakeup events on both hosts
  OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts
  OMAP3: PM: PRCM interrupt: check MPUGRPSEL register
  OMAP3: PM: Prevent hang in prcm_interrupt_handler

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: beef up DRAM error injection
  amd64_edac: fix DRAM base and limit extraction
  amd64_edac: fix chip select handling
  amd64_edac: simple fix to allow reporting of CECC errors
  amd64_edac: fix K8 intlv_sel check
  amd64_edac: fix interleave enable tests
  amd64_edac: fix DRAM base and limit address extraction
  amd64_edac: fix driver instance lookup table allocation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  ethoc: limit the number of buffers to 128
  ethoc: use system memory as buffer
  ethoc: align received packet to make IP header at word boundary
  ethoc: fix buffer address mapping
  ethoc: fix typo to compute number of tx descriptors
  au1000_eth: Duplicate test of RX_OVERLEN bit in update_rx_stats()
  netxen: Fix Unlikely(x) > y
  pasemi_mac: ethtool get settings fix
  add maintainer for network drop monitor kernel service
  tg3: Fix phylib locking strategy
  rndis_host: support ETHTOOL_GPERMADDR
  ipv4: arp_notify address list bug
  gigaset: add kerneldoc comments
  gigaset: correct debugging output selection
  gigaset: improve error recovery
  gigaset: fix device ERROR response handling
  gigaset: announce if built with debugging
  gigaset: handle isoc frame errors more gracefully
  gigaset: linearize skb
  gigaset: fix reject/hangup handling
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
  sis5513: fix PIO setup for ATAPI devices

Now that range timers and deferred timers are common, I found a
problem with these using the "perf timechart" tool. Frans Pop also
reported high scheduler latencies via LatencyTop, when using
iwlagn.

It turns out that on x86, these two 'opportunistic' timers only get
checked when another "real" timer happens. These opportunistic
timers have the objective to save power by hitchhiking on other
wakeups, as to avoid CPU wakeups by themselves as much as possible.

The change in this patch runs this check not only at timer
interrupts, but at all (device) interrupts. The effect is that:

 1) the deferred timers/range timers get delayed less

 2) the range timers cause less wakeups by themselves because
    the percentage of hitchhiking on existing wakeup events goes up.

I've verified the working of the patch using "perf timechart", the
original exposed bug is gone with this patch. Frans also reported
success - the latencies are now down in the expected ~10 msec
range.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Tested-by: NFrans Pop <elendil@planet.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091008064041.67219b13@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When a vmalloc'd area is mmap'd into userspace, some kind of
co-ordination is necessary for this to work on platforms with cpu
D-caches which can have aliases.

Otherwise kernel side writes won't be seen properly in userspace
and vice versa.

If the kernel side mapping and the user side one have the same
alignment, modulo SHMLBA, this can work as long as VM_SHARED is
shared of VMA and for all current users this is true.  VM_SHARED
will force SHMLBA alignment of the user side mmap on platforms with
D-cache aliasing matters.

The bulk of this patch is just making it so that a specific
alignment can be passed down into __get_vm_area_node().  All
existing callers pass in '1' which preserves existing behavior.
vmalloc_user() gives SHMLBA for the alignment.

As a side effect this should get the video media drivers and other
vmalloc_user() users into more working shape on such systems.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
LKML-Reference: <200909211922.n8LJMYjw029425@imap1.linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  agp: parisc-agp.c - use correct page_mask function
  parisc: Fix linker script breakage.
  parisc: convert to asm-generic/hardirq.h
  parisc: Make THREAD_SIZE available to assembly files and linker scripts.
  parisc: correct use of SHF_ALLOC
  parisc: rename parisc's vmalloc_start to parisc_vmalloc_start
  parisc: add me to Maintainers
  parisc: includecheck fix: signal.c
  parisc: HAVE_ARCH_TRACEHOOK
  parisc: add skeleton syscall.h
  parisc: stop using task->ptrace for {single,block}step flags
  parisc: split syscall_trace into two halves
  parisc: add missing TI_TASK macro in syscall.S
  parisc: tracehook_signal_handler
  parisc: tracehook_report_syscall

In module unload, lis3lv02d core driver sysfs clean up was not called.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NDaniel Mack <daniel@caiaq.de>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Cc: "Trisal, Kalhan" <kalhan.trisal@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PC Card 8.0 specification (vol.  4, section 3.2.10) says the
TPLLV1_INFO field of the CISTPL_VERS_1 tuple must contain 4 strings.  Some
cards don't have all 4 so just parse as many as we can.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Tested-by: NJonathan Cameron <jic23@cam.ac.uk>
Tested-by: NBing Zhao <bzhao@marvell.com>
Cc: Roel Kluin <roel.kluin@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For hwpoison stress testing.  The debugfs mount point is assumed to be
/debug/.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>