Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 17 2月, 2015 2 次提交
  3. 24 11月, 2014 4 次提交
  5. 31 5月, 2014 1 次提交
  7. 28 5月, 2014 1 次提交
    • P
      MIPS: pm-cps: add PM state entry code for CPS systems · 3179d37e
      由 Paul Burton 提交于 
      This patch adds code to generate entry & exit code for various low power
states available on systems based around the MIPS Coherent Processing
System architecture (ie. those with a Coherence Manager, Global
Interrupt Controller & for >=CM2 a Cluster Power Controller). States
supported are:

  - Non-coherent wait. This state first leaves the coherent domain and
    then executes a regular MIPS wait instruction. Power savings are
    found from the elimination of coherency interventions between the
    core and any other coherent requestors in the system.

  - Clock gated. This state leaves the coherent domain and then gates
    the clock input to the core. This removes all dynamic power from the
    core but leaves the core at the mercy of another to restart its
    clock. Register state is preserved, but the core can not service
    interrupts whilst its clock is gated.

  - Power gated. This deepest state removes all power input to the core.
    All register state is lost and the core will restart execution from
    its BEV when another core powers it back up. Because register state
    is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP
    implementation in order for the core to exit the state successfully.

The code will detect which states are available on the current system
during boot & generate the entry/exit code for those states. This will
be used by cpuidle & hotplug implementations.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
      3179d37e
  9. 24 5月, 2014 1 次提交
    • R
      MIPS: MT: Remove SMTC support · b633648c
      由 Ralf Baechle 提交于 
      Nobody is maintaining SMTC anymore and there also seems to be no userbase.
Which is a pity - the SMTC technology primarily developed by Kevin D.
Kissell <kevink@paralogos.com> is an ingenious demonstration for the MT
ASE's power and elegance.

Based on Markos Chandras <Markos.Chandras@imgtec.com> patch
https://patchwork.linux-mips.org/patch/6719/ which while very similar did
no longer apply cleanly when I tried to merge it plus some additional
post-SMTC cleanup - SMTC was a feature as tricky to remove as it was to
merge once upon a time.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      b633648c
  11. 24 4月, 2014 1 次提交
  13. 27 3月, 2014 1 次提交
  15. 07 3月, 2014 3 次提交
  17. 23 1月, 2014 5 次提交
  19. 30 10月, 2013 3 次提交
  21. 22 5月, 2013 1 次提交
  23. 09 5月, 2013 2 次提交
  25. 08 5月, 2013 1 次提交
  27. 10 4月, 2013 1 次提交
  29. 20 3月, 2013 1 次提交
    • F
      MIPS: Fix code generation for non-DSP capable CPUs · 63c2b681
      由 Florian Fainelli 提交于 
      Commit 32a7ede6 (MIPS: dsp: Add assembler support for DSP ASEs) has
enabled the use of DSP ASE specific instructions such as rddsp and wrdsp
under the idea that all code path that will make use of these two
instructions are properly checking for cpu_has_dsp to ensure that the
particular CPU we are running on *actually* supports DSP ASE.

This commit actually causes the following oops on QEMU Malta emulating a
MIPS 24Kc without the DSP ASE implemented:

[    7.960000] Reserved instruction in kernel
[    7.960000] Cpu 0
[    7.960000] $ 0   : 00000000 00000000 00000014 00000005
[    7.960000] $ 4   : 8fc2de48 00000001 00000000 8f59ddb0
[    7.960000] $ 8   : 8f5ceec4 00000018 00000c00 00800000
[    7.960000] $12   : 00000100 00000200 00000000 00457b84
[    7.960000] $16   : 00000000 8fc2ba78 8f4ec980 00000001
[    7.960000] $20   : 80418f90 00000000 00000000 000002dd
[    7.960000] $24   : 0000009c 7730d7b8
[    7.960000] $28   : 8f59c000 8f59dd38 00000001 80104248
[    7.960000] Hi    : 0000001d
[    7.960000] Lo    : 0000000b
[    7.960000] epc   : 801041ec thread_saved_pc+0x2c/0x38
[    7.960000]     Not tainted
[    7.960000] ra    : 80104248 get_wchan+0x48/0xac
[    7.960000] Status: 1000b703    KERNEL EXL IE
[    7.960000] Cause : 10800028
[    7.960000] PrId  : 00019300 (MIPS 24Kc)
[    7.960000] Modules linked in:
[    7.960000] Process killall (pid: 1574, threadinfo=8f59c000,
task=8fd14558, tls=773aa440)
[    7.960000] Stack : 8fc2ba78 8012b008 0000000c 0000001d 00000000
00000000 8f58a380
                  8f58a380 8fc2ba78 80202668 8f59de78 8f468600 8f59de28
801b2a3c 8f59df00 8f98ba20 74696e69
                  8f468600 8f59de28 801b7308 0081c007 00000000 00000000
00000000 00000000 00000000 00000000
                  00000000 8fc2bbb4 00000001 0000001d 0000000b 77f038cc
7fe80648 ffffffff ffffffff 00000000
                  00000001 0016e000 00000000 ...
[    7.960000] Call Trace:
[    7.960000] [<801041ec>] thread_saved_pc+0x2c/0x38
[    7.960000] [<80104248>] get_wchan+0x48/0xac

The disassembly of thread_saved_pc points to the following:
000006d0 <thread_saved_pc>:
 6d0:   8c820208        lw      v0,520(a0)
 6d4:   3c030000        lui     v1,0x0
 6d8:   24630000        addiu   v1,v1,0
 6dc:   10430008        beq     v0,v1,700 <thread_saved_pc+0x30>
 6e0:   00000000        nop
 6e4:   3c020000        lui     v0,0x0
 6e8:   8c43000c        lw      v1,12(v0)
 6ec:   04620004        bltzl   v1,700 <thread_saved_pc+0x30>
 6f0:   00001021        move    v0,zero
 6f4:   8c840200        lw      a0,512(a0)
 6f8:   00031080        sll     v0,v1,0x2
 6fc:   7c44100a        lwx     v0,a0(v0)   <------------
 700:   03e00008        jr      ra
 704:   00000000        nop

If we specifically disable -mdsp/-mdspr2 for arch/mips/kernel/process.o,
we get the following (non-crashing) assembly:

00000708 <thread_saved_pc>:
 708:   8c820208        lw      v0,520(a0)
 70c:   3c030000        lui     v1,0x0
 710:   24630000        addiu   v1,v1,0
 714:   10430009        beq     v0,v1,73c <thread_saved_pc+0x34>
 718:   00000000        nop
 71c:   3c020000        lui     v0,0x0
 720:   8c42000c        lw      v0,12(v0)
 724:   04420005        bltzl   v0,73c <thread_saved_pc+0x34>
 728:   00001021        move    v0,zero
 72c:   8c830200        lw      v1,512(a0)
 730:   00021080        sll     v0,v0,0x2
 734:   00431021        addu    v0,v0,v1
 738:   8c420000        lw      v0,0(v0)
 73c:   03e00008        jr      ra
 740:   00000000        nop

The specific line that leads a different assembly being produced is:

unsigned long thread_saved_pc(struct task_struct *tsk)
...
	return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; <---

The problem here is that the compiler was given the right to use DSP
instructions with the -mdsp / -mdspr2 command-line switches and
performed some optimization for us and used DSP ASE instructions where
we are not checking that the running CPU actually supports DSP ASE.

This patch fixes the issue by partially reverting commit 32a7ede6 for
arch/mips/kernel/Makefile in order to remove the -mdsp / -mdspr2
compiler command-line switches such that we are now guaranteed that the
compiler will not optimize using DSP ASE reserved instructions. We also
need to fixup the rddsp/wrdsp and m{t,h}{hi,lo}{0,1,2,3} macros in
arch/mips/include/asm/mipsregs.h to tell the assembler that we are going
to explicitely use DSP ASE reserved instructions. The comment in
arch/mips/kernel/Makefile is also updated to reflect that.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      63c2b681
  31. 17 2月, 2013 2 次提交
  33. 01 2月, 2013 1 次提交
  35. 14 12月, 2012 3 次提交
    • R
      MIPS: PMC-Sierra Yosemite: Remove support. · bdf20507
      由 Ralf Baechle 提交于 
      Nobody seems to be interested anymore and upstream also never had an
ethernet driver.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      bdf20507
    • R
      MIPS: Remove usage of CEVT_R4K_LIB config option. · f772cdb2
      由 Ralf Baechle 提交于 
      Manuel Lauss <manuel.lauss@gmail.com> writes:

I introduced it as a fallback because early revisions of Alchemy hardware
we shipped had a non-functional 32kHz timer and had to rely on the r4k
timer instead.  Previously the r4k timer was initialized regardless, but
it's useless with the "wait" instruction.

So long story short:   I need either the on-chip 32kHz timer OR the r4k
timer if the 32kHz one is unusable, but not both, and r4k timer is useless
when au1k_idle is in use.

The current in-kernel Alchemy boards all work with the 32kHz timer, so I'm
not against removing R4K_LIB symbols.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      f772cdb2
    • S
      MIPS: Remove usage of CSRC_R4K_LIB config option. · d7ea335c
      由 Steven J. Hill 提交于 
      Manuel Lauss <manuel.lauss@gmail.com> writes:

I introduced it as a fallback because early revisions of Alchemy hardware
we shipped had a non-functional 32kHz timer and had to rely on the r4k
timer instead.  Previously the r4k timer was initialized regardless, but
it's useless with the "wait" instruction.

So long story short:   I need either the on-chip 32kHz timer OR the r4k
timer if the 32kHz one is unusable, but not both, and r4k timer is useless
when au1k_idle is in use.

The current in-kernel Alchemy boards all work with the 32kHz timer, so I'm
not against removing R4K_LIB symbols.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      d7ea335c
  37. 13 12月, 2012 1 次提交
  39. 11 10月, 2012 1 次提交
  41. 03 10月, 2012 1 次提交
    • J
      kbuild: Fix gcc -x syntax · b1e0d8b7
      由 Jean Delvare 提交于 
      The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.

This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.

Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
      b1e0d8b7
  43. 28 9月, 2012 2 次提交
    • D
      Make most arch asm/module.h files use asm-generic/module.h · 786d35d4
      由 David Howells 提交于 
      Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      786d35d4
    • R
      MIPS: Fix module.c build for 32 bit · 6ede8123
      由 Ralf Baechle 提交于 
      Fixes build failure introduced by "Make most arch asm/module.h files use
asm-generic/module.h" by moving all the RELA processing code to a
separate file to be used only for RELA processing on 64-bit kernels.

  CC      arch/mips/kernel/module.o
arch/mips/kernel/module.c:250:14: error: 'reloc_handlers_rela' defined but not
used [-Werror=unused-variable]
cc1: all warnings being treated as errors

make[6]: *** [arch/mips/kernel/module.o] Error 1
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      6ede8123
  45. 23 8月, 2012 1 次提交