- 10 5月, 2010 40 次提交
-
-
由 Gustavo F. Padovan 提交于
The code was reusing the control var without its reinitialization. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 João Paulo Rechi Vita 提交于
Add this check to getsockopt makes possible to fail early instead of waiting until listen / connect. Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
if enable_ertm is true and we have SOCK_STREAM the default mode will be ERTM, otherwise Basic Mode. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
The L2CAP Extended Features are still unstable and under development, so we are adding them under the EXPERIMENTAL flag to get more feedback on them. L2CAP Extended Features includes the Enhanced Retransmission and Streaming Modes, Frame Check Sequence (FCS), and Segmentation and Reassemby (SAR). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
When the I-frame received is the expected, i.e., its tx_seq is equal to expected_tx_seq and we are under a SREJ, we can just add it to the tail of the list. Doing that we change the complexity from O(n) to O(1). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
l2cap_drop_acked_frames() was droping not sent packets, causing them to be not transmitted. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
The code was crashing due to a invalid access to hci_conn after the channel disconnect. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
If there is no frames to retransmit l2cap was crashing the kernel, now we check if the queue is empty first. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
With the sockopt extension we can set a per-channel MaxTx value. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Very useful for testing purposes. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> [jprvita@profusion.mobi: improved parameter description] Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Now that we can set the txWindow we need to change the acknowledgement procedure to ack after each (pi->txWindow/6 + 1). The plus 1 is to avoid the zero value. It also renames pi->num_to_ack to a better name: pi->num_acked. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Now we can set/get Transmission Window size via sockopt. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
As specified by Bluetooth 3.0 spec we shall send an acknowledgment using the Send-Ack() after clear the SREJ list. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
If the SDU size is greater than the MTU something is wrong, so report an error. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> [jprvita@profusion.mobi: set err to appropriate errno value] Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Fix a possible problem with Big Endian machines. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
We were accepting values bigger than we can accept. This was leading ERTM to drop packets because of wrong FCS checks. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
On Enhanced Retransmission Mode and Streaming Mode a entity can send, on a successful Conf RSP, new values for the RFC fields. For example, the entity can send txWindow and MPS values less than the value received on a Conf REQ. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Tx Window value shall not be used with Streaming Mode and the receiver of the config Request shall ignore its value. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
We ack I-frames on each txWindow/5 I-frames received, but if the sender stop to send I-frames and it's not a txWindow multiple we can leave some frames unacked. So I added a timer to ack I-frames on this case. The timer expires in 200ms. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Now the code handles the case under SREJ_SENT state. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
tx_seq var already has the value of __get_reqseq(). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
It also fix a bug: we weren't acknowledging I-frames when P=1. Note that when F=1 we are acknowledging packets before setting RemoteBusy to False. The spec says we should do that in the opposite order, but acknowledment of packets doesn't care about RemoteBusy flag so we can do that in the order we want. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
We weren't handling the receipt under SREJ_SENT state table. It also introduce l2cap_send_srejtail(). It will be used in the nexts commits too. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Create a function for each type fo S-frame and avoid a lot of nested code. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
This finishes the implementation of Recv RR (P=0)(F=0) for the Enhanced Retransmission Mode on L2CAP. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Abstract the send of of P-bit and avoids code duplication like we did with the setting of F-bit. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Shall be used to ack received frames, It must decide type of acknowledgment between a RR frame, a RNR frame or transmission of pending I-frames. It also modifies l2cap_ertm_send() to report the number of frames sent. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
After reassembly the SDU we need to check his size. It can't overflow the MTU size. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
All packets with size fewer than the minimum specified is dropped. Note that the size of the l2cap basic header, FCS and SAR fields are already subtracted of len at the moment of the size check. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
On receipt of a F=1 under WAIT_F state ERTM shall stop monitor timer and start retransmission timer (if there are unacked frames). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
After receive a RR with P bit set ERTM shall use this funcion to choose what type of frame to reply with F bit = 1. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Trivial clean up. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
ERTM and Streaming Modes was having problems when the ACL MTU is lower than MPS. The 'minus 10' is to take in account the header and fcs lenghts. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
All operation related to the txWindow should be modulo 64. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
l2cap_data_channel do not free the S-frame, so we free it here. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Inside "case L2CAP_MODE_BASIC:" we don't need to check for sk_type and L2CAP mode. So only the length check is fine. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Remove extra braces and labels, break over column 80 lines, etc Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
It also removes an unneeded check for the MTU. The check is done before on sco_send_frame() Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-