- 18 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
replace it by ndo_set_rx_mode Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2011 2 次提交
-
-
由 Shreyas Bhatewara 提交于
NETIF_F_HIGHDMA is being disabled even when dma64 is true. This patch fixes it. CC: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Parent device for netdev should be set before netdev_info() can be called otherwise there is a NULL pointer dereference and probe() fails. Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com>-- Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 7月, 2011 1 次提交
-
-
由 Shreyas Bhatewara 提交于
vmxnet3 device supports only power-of-two number of queues. The driver therefore needs to check this and rounds down the number of queues to the nearest power of two. Signed-off-by: NYong Wang <yongwang@vmware.com> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Reviewed-by: NDmitry Torokhov <dtor@vmware.com>
-
- 06 7月, 2011 1 次提交
-
-
由 Shreyas Bhatewara 提交于
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: NScott J. Goldman <scottjg@vmware.com> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2011 2 次提交
-
-
由 Jesse Gross 提交于
When receiving packets from another guest on the same hypervisor, it's generally possible to receive large packets because no segmentation is necessary and these packets are handled by LRO. However, when doing routing or bridging we must disable LRO and lose this benefit. In these cases GRO can still be used and it is very effective because the packets which are segmented in the hypervisor are received very close together and can easily be merged. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: Scott Goldman <scottjg@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NScott J. Goldman <scottjg@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
This converts the vmxnet3 driver to use the new vlan model. In doing so it fixes missing tags in tcpdump and failure to do checksum offload when tx vlan offload is disabled. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NScott J. Goldman <scottjg@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 6月, 2011 1 次提交
-
-
由 Neil Horman 提交于
While doing some backporting I noticed that vmxnet3 had a variable that was set but never used. Get rid of it, and stop the compiler from griping Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 09 6月, 2011 1 次提交
-
-
由 stephen hemminger 提交于
Convert vmxnet3 driver to 64 bit statistics interface. This driver was already counting packet per queue in a 64 bit value so not a huge change. Eliminate unused old net_device_stats structure. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NScott J. Goldman <scottjg@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2011 1 次提交
-
-
由 Shreyas Bhatewara 提交于
Resending this patch with few changes. Avoid multiple queues when MSI or MSI-X not available Limit number of Tx queues to 1 if MSI/MSI-X support is not configured in the kernel. This will make number of tx and rx queues equal when MSI/X is not configured thus providing better performance. Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2011 1 次提交
-
-
由 Roland Dreier 提交于
Using the vmxnet3 driver produces a lockdep warning because vmxnet3_set_mc(), which is called with mc->mca_lock held, takes adapter->cmd_lock. However, there are a couple of places where adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a softirq that tries to take mc->mca_lock could happen while adapter->cmd_lock is held, leading to an AB-BA deadlock. I'm not sure if this is a real potential deadlock or not, but the simplest and best fix seems to be simply to make sure we take cmd_lock with spin_lock_irqsave() everywhere -- the places with plain spin_lock just look like oversights. The full enormous lockdep warning is: ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.39-rc6+ #1 --------------------------------------------------------- ifconfig/567 just changed the state of lock: (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 but this lock took another, SOFTIRQ-unsafe lock in the past: (&(&adapter->cmd_lock)->rlock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: 4 locks held by ifconfig/567: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20 #1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0 #2: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0 #3: (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280 the shortest dependencies between 2nd lock and 1st lock: -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b SOFTIRQ-ON-W at: [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3] ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3] [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0 [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50 [<ffffffff81470127>] __dev_open+0xc7/0x100 [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180 [<ffffffff81470568>] dev_change_flags+0x28/0x70 [<ffffffff814da960>] devinet_ioctl+0x730/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (_xmit_ETHER){+.....} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0 ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 IN-SOFTIRQ-W at: [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 } ... key at: [<ffffffff82801be2>] __key.40877+0x0/0x8 ... acquired at: [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b stack backtrace: Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1 Call Trace: <IRQ> [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170 [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170 [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400 [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10 [<ffffffff81012255>] ? native_sched_clock+0x15/0x70 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0 [<ffffffff810122b9>] ? sched_clock+0x9/0x10 [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13 [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff8108a3af>] ? local_clock+0x6f/0x80 [<ffffffff81575898>] ? do_page_fault+0x268/0x560 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff8117737e>] ? fget_light+0x33e/0x430 [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NScott J. Goldman <scottjg@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
This also removes private feature flags that were always set to true. You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following cleanup. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 16 1月, 2011 7 次提交
-
-
由 Shreyas Bhatewara 提交于
In case of single tx and rx queues, three MSI-x vectors are allocated instead of two. This patch fixes that. Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Access to cmd register is racey, especially in smp environments. Protect it using a spinlock. Signed-off-by: NMatthieu Bucchianeri <matthieu@vmware.com> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
There is a small possibility of a race where the suspend routine gets called, while a napi callback is still pending and when that comes up, it enables interrupts which just got disabled in the suspend routine. This change adds napi disable call in suspend and enable in resume to avoid race. Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
This is a performance enhancement fix. vmxnet3 device performs better when provided with at least 54 bytes (ethernet 14 + IP 20+ TCP 20) in the first SG buffer. For UDP packets driver provides lesser than that in first sg. This change fixes the same. Also avoid the redundant pskb_may_pull() call. Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Make hw vlan tag stripping as enabled by default. Thereby remove the code to conditionally enable it later. Signed-off-by: NGuolin Yang <gyang@vmware.com> Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
While activating the device get it's MAC address from netdev. This will allow the MAC address configured using ifconfig to persist through the reset. Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Fix a bug while changing ring size when MTU is changed. Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 12月, 2010 2 次提交
-
-
由 Joe Perches 提交于
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: NJoe Perches <joe@perches.com>
-
由 Dan Carpenter 提交于
There were several paths that didn't release their locks. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 12月, 2010 1 次提交
-
-
由 Michał Mirosław 提交于
Some drivers are using skb_transport_offset(skb) instead of skb->csum_start for NETIF_F_HW_CSUM offload. This does not matter now, but if someone implements checksumming of encapsulated packets then this will break silently. TSO output paths are left as they are, since they are for IP+TCP only (might be worth converting though). Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
flush_scheduled_work() is on its way out. This patch contains simple conversions to replace flush_scheduled_work() usage with direct cancels and flushes. Directly cancel the used works on driver detach and flush them in other cases. The conversions are mostly straight forward and the only dangers are, * Forgetting to cancel/flush one or more used works. * Cancelling when a work should be flushed (ie. the work must be executed once scheduled whether the driver is detaching or not). I've gone over the changes multiple times but it would be much appreciated if you can review with the above points in mind. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: e1000-devel@lists.sourceforge.net Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: netdev@vger.kernel.org
-
- 20 11月, 2010 1 次提交
-
-
由 Shreyas Bhatewara 提交于
Add multiqueue support to vmxnet3 driver This change adds multiqueue and thus receive side scaling support to vmxnet3 device driver. Number of rx queues is limited to 1 in cases where MSI is not configured or one MSIx vector is not available per rx queue Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Reviewed-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 10月, 2010 1 次提交
-
-
由 Harvey Harrison 提交于
Noticed by sparse: drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16 drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16 drivers/net/vmxnet3/vmxnet3_drv.c:876:24: warning: restricted __be16 degrades to integer Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 10月, 2010 2 次提交
-
-
由 Harvey Harrison 提交于
It's a le64, not a le32, typo in one place only. Noticed by sparse: drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: warning: incorrect type in assignment (different base types) drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: expected restricted __le64 [usertype] confPA drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: got restricted __le32 [usertype] <noident> Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
It's easier to just annotate the constants as little endian types and set/clear the flags directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2010 2 次提交
-
-
由 stephen hemminger 提交于
Gcc doesn't usually handle inline across compilation units, and the functions don't have to be global in scope. Move the set/reset flag functions int the existing vmxnet3 header. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 7月, 2010 1 次提交
-
-
由 Bhavesh Davda 提交于
Fix an overflow bug in vmxnet3 Tx descriptor This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing into the 'gen' bit in the descriptor thereby corrupting the descriptor and stalling the transmit ring. Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NMatthew Delco <delcoM@vmware.com> Signed-off-by: NRonghua Zhang <ronghua@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2010 2 次提交
-
-
由 Shreyas Bhatewara 提交于
Respect the interrupt type set in VM configuration. When interrupt type is not auto, do not ignore the interrupt type set from VM configuration. Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Hold rtnl_lock to get the right link state. While asynchronously resetting the device, hold rtnl_lock to get the right value from netif_running. If a reset is scheduled, and the device goes thru close and open, it may happen that reset and open may run in parallel. Holding rtnl_lock will avoid this. Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 7月, 2010 1 次提交
-
-
由 Shreyas Bhatewara 提交于
This change initializes the state of link at the time when driver is loaded. The ethtool output for 'link detected' and 'link speed' is thus valid even before the interface is brought up. Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 7月, 2010 1 次提交
-
-
由 Ronghua Zang 提交于
A new bit map 'intrCtrl' is introduced in the DriverShared area. The driver should update VMXNET3_IC_DISABLE_ALL bit before writing IMR. Signed-off-by: NRonghua Zang <ronghua@vmware.com> Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2010 1 次提交
-
-
由 Julia Lawall 提交于
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 5月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Network drivers do not have to update last_rx, unless they need it for their private use. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-